Commit Graph

12916 Commits

Author SHA1 Message Date
Jim Mussared
f241db7efe teensy: Switch to use manifest.py instead of FROZEN_DIR.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-17 23:54:05 +11:00
Jim Mussared
cc23e99f32 py/modio: Remove io.resource_stream function.
This feature is not enabled on any port, it's not in CPython's io module,
and functionality is better suited to the micropython-lib implementation of
pkg_resources.
2021-12-17 23:53:44 +11:00
Damien George
d6dc4cb65a py/showbc: Fix printing of raw bytecode header on nanbox builds.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-15 16:54:47 +11:00
Damien George
598618e8cf tools/makemanifest.py: Make str conversion compatible with Python 2.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-15 16:51:08 +11:00
Tomas Vanek
9aa151e3f3 esp32/boards: Remove SPI pin defaults from GENERIC S2/S3 boards.
Default SPI pins are now correctly assigned by machine_hw_spi.c even for S2
and S3.  mpconfigboard.h files define defaults with flipped SPI(1) and
SPI(2) to workaround a bug in machine_hw_spi.c - the bug is fixed.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:53:17 +11:00
Tomas Vanek
e761152d72 esp32/machine_hw_spi: Set proper default SPI(id=2) pins on S2 and S3.
Use IO_MUX pins as defined by ESP IDF in soc/esp32/include/soc/spi_pins.h

ESP32S2 and S3 don't have IO_MUX pins for SPI3, GPIO matrix is always used.
Choose suitable defaults for S2 and S3.

ESP32C3 does not have SPI3 at all.  Don't define pin mappings for it.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:53:17 +11:00
Tomas Vanek
d08886558b esp32/machine_hw_spi: Set proper default SPI(id=1) pins on S2,S3 and C3.
Use IO_MUX pins as defined by ESP IDF in soc/esp32*/include/soc/spi_pins.h
Alternatively use now deprecated HSPI_IOMUX_PIN_NUM_xxx
(or FSPI_IOMUX_PIN_NUM_xxx for ESP32S2) for compatibility with IDF 4.2
and older.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:50:27 +11:00
Tomas Vanek
3305ec44a2 esp32/machine_hw_spi: Fix SPI default pins reordering on ESP32-S2/S3.
The index of machine_hw_spi_obj and machine_hw_spi_default_pins arrays is
assigned to 0 for ARG_id==HSPI_HOST and 1 for another SPI.  On ESP32S2 and
S3 HSPI_HOST=2 so the first set (idx=0) of default pins is used for
SPI(id=2) aka HSPI/SPI3 and the second set (idx=1) for SPI(id=1) aka
FSPI/SPI2.  This makes a misleading mess in MICROPY_HW_SPIxxxx definitions
and it is also in contradiction to the comments around the definitions.

Change the test of ARG_id to fix the order of machine_hw_spi_default_pins.

This change might require adjusting MICROPY_HW_SPIxxxx definitions in
mpconfigboard.h of S2/S3 based boards.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:49:23 +11:00
Tomas Vanek
f9733705a9 esp32/machine_pin: Make GPIO 26 usable for S2,S3 if SPIRAM not config'd.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:48:46 +11:00
Christian Decker
e9f880482c tools/upip.py: Support == to specify exact package version. 2021-12-15 12:49:14 +11:00
Damien George
d9d67adef1 docs: Remove trailing spaces and convert tabs to spaces.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-15 11:49:22 +11:00
robert-hh
5ca56aaf16 mimxrt: Tidy up the board flash related files.
- Move the qspi_xxxx_flash_config.c files to hal.
  It turned out that they are less board than flash type specific.
- Change to a common flexspi_flash_config.h header file.
2021-12-14 20:31:20 +01:00
robert-hh
c5dbbf71c0 mimxrt: Use -Og instead of -O0 for DEBUG builds.
Thanks for the hint, Damien. The DEBUG build got very large recently.
The major difference is, that inline function are now inlined and
not included as a function. That's good and maybe bad. The good thing is,
that the code speed si now close to the final code. It could be worse
in single step debugging. I'll see.

Setting this option caused a new warning and a formatting error
to pop up at different places. Fixed as well.
2021-12-14 08:07:52 +01:00
robert-hh
64aa0bcb88 mimxrt: Enable ticks_cpu at boot time for NDEBUG builds only.
Otherwise, it get's in trouble with a Debugger. Reason to be found.
Also: Increase code segment to 2 MB for the MIMXRT1050_EVK build.
2021-12-14 08:07:52 +01:00
robert-hh
74e8db0ed1 mimxrt: Refactor the reading of the machine id.
The ID is read in a single function and used for:
- machine.unique_id()
- Ethernet MAC addresses.
- ...

That facilitates use of other MCU using a different access method for
the ID (e.g. i.MX RT1176).
2021-12-14 08:07:52 +01:00
robert-hh
1e9eaa7af5 mimxrt: Add a driver for the DP83848 PHY device.
Just another choice for the PHY interface.

Added: Keyword option phy_clock=LAN.IN or LAN.OUT
to define the source of the 50MHZ clock for the PHY
interface. The RMII clock is not enabled if it
is generated by a PYH board. Constants:

LAN.IN  The clock is provided by the PHY board.
LAN.OUT The clock is provided by the MCU board.

The default is LAN.OUT or the value set in mpconfigboard.h, which
is currently set to IN only for the SEEED ARCH MIX board. Usage etc:

lan = LAN(phy_type=LAN.PHY_DP83848, phy_clock=LAN.IN)
2021-12-14 08:07:52 +01:00
robert-hh
5d8941ec85 mimxrt: Fix a tiny unnoticed bug in sdcard.c.
This code line will hardly ever be compiled and executed, but since
it is there, it must be correct.
2021-12-14 08:07:52 +01:00
robert-hh
ea09dccfea mimxrt: Re-Enable eth checksum creation by HW.
The initial problem with a wrong ICMP checksum was caused by
the test code setting a checksum and the HW taking that probably as
the start value and ending up with 0xffff. With a checksum field of 0
set by the test code the HW creates the proper checksum.
2021-12-14 08:07:52 +01:00
robert-hh
bbe25f4704 mimxrt: Support selection of PHY type and address.
Useful for boards without a PHY interface, where that has to be
attached. Like the Seed ARCH MIX board or Vision SOM. Phy drivers
supported so far are:

- KSZ8081
- DP83825
- LAN8720

More to come. Usage e.g.:
lan = LAN(phy_type=LAN.PHY_LAN8720, phy_addr=1)

The default values are those set in mpconfigboard.h.
2021-12-14 08:07:52 +01:00
robert-hh
bc1b0fd2c1 mimxrt: Define UART 0 on MIMXRT boards.
UART 0 is attached to the Debug USB port. The settings are
115200 Baud, 8N1.
For MIMXRT1010_EVK this is identical to UART1. For the other boards,
this is an additional UART.
2021-12-14 08:07:52 +01:00
iabdalkader
1b7eee24eb extmod/network_ninaw10: Fix config of AP mode.
* Fix missing call to connect to configure module in AP mode.
* Use enum for config/connect args indices.
2021-12-14 15:14:58 +11:00
iabdalkader
f21c565583 rp2/machine_uart: Handle and clear UART RX timeout IRQ.
The pico-sdk 1.3.0 update in 97a7cc243b
introduced a change that broke RP2 Bluetooth UART, and possibly UART in
general, which stops working right after UART is initialized.  The commit
raspberrypi/pico-sdk@2622e9b enables the UART receive timeout (RTIM) IRQ,
which is asserted when the receive FIFO is not empty, and no more
characters are received for a period of time.

This commit makes sure the RTIM IRQ is handled and cleared in
uart_service_interrupt.
2021-12-14 14:59:39 +11:00
Damien George
5adb1fa40e esp32,esp8266: Extract qstr from object when comparing keys in config().
Following on from a previous fix for the same problem made in
3a431fba50.

Fixes issue #8052.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 14:27:13 +11:00
Damien George
6995cf03dd stm32/sdcard: Add config option to force MM card capacity.
The current ST HAL does not support reading the extended CSD so cannot
correctly detect the capacity of high-capacity cards.  As a workaround, the
capacity can be forced via the MICROPY_HW_MMCARD_LOG_BLOCK_NBR config
option.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George
b26704aac5 stm32/sdcard: Support 8-bit wide SDIO bus.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George
9a1ab2286d stm32/main: Call sdcard_init when only MICROPY_HW_ENABLE_MMCARD enabled.
Otherwise, if MMCARD is enabled and not SDCARD, then the GPIO will not be
configured for SDIO.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George
88ac5a3116 stm32: Update L4 code to build with latest stm32lib and L4 HAL 1.17.0.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George
a0f5b3148a lib/stm32lib: Update library for L4 v1.17.0, new G4, WL, and MMC fixes.
Changes in this new library version are:
- Update L4 HAL to v1.17.0.
- Add G4 HAL at v1.3.0.
- Add WL HAL at v1.1.0.
- Fix F4 UART and DMA data loss with RX hardware flow control.
- Optimise USB to pass config struct by reference.
- Fix bug in F4 MMC HAL_MMC_Erase function.
- Fix bug setting MMC relative address in F4 and F7 HAL.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George
0892ebe091 stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
Fixes issue #8059.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 23:19:20 +11:00
Damien George
5fc55999b2 stm32/boards: Remove unused MICROPY_HW_ENABLE_TIMER config.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 23:19:00 +11:00
Damien George
10c6f03cbe stm32/boards: Remove stray '+' characters at start of lines in ld files.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 23:15:25 +11:00
Damien George
3f589e2f39 tools/autobuild: Automatically build all esp32 boards.
Any board with a board.json file will be built.  ESP32-based boards will be
built using the IDF at $IDF_PATH_V42, all other MCU variants (S2, S3, C3)
will be built using the IDF at $IDF_PATH_V44.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 21:29:27 +11:00
Damien George
c613f5bb49 stm32/boards/LEGO_HUB_NO6: Set filesystem label as HUB_NO6.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-09 16:51:35 +11:00
Jim Mussared
92f54fe8d9 stm32/boards/NUCLEO_WB55: Fix LED ordering.
These were commented correctly by their colour, but in the wrong order with
respect to the PCB silkscreen.

Fixes issue #8054.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-09 14:03:35 +11:00
Damien George
67f66795c0 tools/mpremote: Implement seek and flush in ioctl method.
Fixes issue #8058.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-09 13:35:59 +11:00
Damien George
9ffb1ad2f8 unix/Makefile: Use -Og instead of -O0 for debug builds.
For the coverage build this reduces the binary size to about 1/4 of its
size, and seems to help gcov/lcov coverage analysis so that it doesn't miss
lines.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-09 12:53:09 +11:00
Damien George
efde4b2c75 extmod/modure: Redirect regex debug printing to mp_printf.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-09 12:53:04 +11:00
Damien George
71168ec55c unix/coverage: Change remaining printf to mp_printf.
For consistency with all other prints in this file, so that the ordering
of output is correct.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-09 12:38:50 +11:00
Jim Mussared
3770fab334 all: Update Python formatting to latest Black version 21.12b0.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-09 12:09:40 +11:00
IhorNehrutsa
b491967bbd esp32/machine_pwm: Implement duty_u16() and duty_ns() PWM methods.
The methods duty_u16() and duty_ns() are implemented to match the existing
docs.  The duty will remain the same when the frequency is changed.
Standard ESP32 as well as S2, S3 and C3 are supported.

Thanks to @kdschlosser for the fix for rounding in resolution calculation.

Documentation is updated and examples expanded for esp32, including the
quickref and tutorial.  Additional notes are added to the machine.PWM docs
regarding limitations of hardware PWM.
2021-12-03 23:58:52 +11:00
Jim Mussared
a7fa18c203 py/builtinimport: Refactor module importing.
Simplify and document/comment the handling of builtin import for:
- already-loaded modules
- built-in modules
- built-in umodules (formerly weak links)
- filesystem modules

Retains existing functionality with smaller code size but should also
facilitate potential new features (built-in packages, controlling the
frozen path).

Also makes the (unix-only) -m behavior a bit more obvious and configurable.

Code size change with this commit:

   bare-arm:    +0 +0.000%
minimal x86:   -64 -0.039%
   unix x64:   -32 -0.006%
unix nanbox:    -4 -0.001%
      stm32:  -184 -0.047% PYBV10
     cc3200:  -120 -0.065%
    esp8266:  -228 -0.033% GENERIC
      esp32:  -268 -0.018% GENERIC[incl +16(data)]
        nrf:  -152 -0.087% pca10040
        rp2:  -256 -0.052% PICO
       samd:   -80 -0.057% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2021-12-01 13:23:34 +11:00
Jonathan Hogg
851ecb2da1 extmod/modbluetooth: Support gap_connect(None) to cancel a connection.
Allow cancellation of in-progress peripheral connections.
2021-12-01 11:56:37 +11:00
Scott Armitage
de7e3cd792 docs/library/machine.Pin.rst: Add Pin.ANALOG mode constant. 2021-11-30 22:33:18 +11:00
Michael Buesch
68d1245f42 docs/library/machine.Timer.rst: Document period and callback args.
Signed-off-by: Michael Buesch <m@bues.ch>
2021-11-30 22:29:03 +11:00
Michael Buesch
1e7c8f2b0b docs/library/machine.SPI.rst: Add example SPI usage.
Signed-off-by: Michael Buesch <m@bues.ch>
2021-11-30 22:28:19 +11:00
Michael Buesch
e7900351bf docs/library/machine.Timer.rst: Document 'id' as positional-only arg.
Signed-off-by: Michael Buesch <m@bues.ch>
2021-11-30 22:27:58 +11:00
Peter Hinch
d94ac4333f docs/library/uasyncio.rst: Detail exception behaviour in cancel/timeout. 2021-11-30 21:43:06 +11:00
Damien George
23a150789d stm32/boards/make-pins.py: Use cpu pins to define static alt-fun macros.
Instead of board pins, so that pins which have only the CPU specified in
pins.csv can still be used with mp_hal_pin_config_alt_static().

Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:25:41 +11:00
Damien George
0c9f5b388e stm32: Include HAL MMC code in F4 builds.
So that the MMC driver can be used on F4 MCUs.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:21:18 +11:00
Damien George
7e61a12eb1 stm32: Add support for F479 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:21:18 +11:00