docs: Remove trailing spaces and convert tabs to spaces.

Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Damien George 2021-12-15 11:49:22 +11:00
parent 5ca56aaf16
commit d9d67adef1
31 changed files with 125 additions and 127 deletions

View File

@ -16,4 +16,3 @@ live in the main MicroPython repository.
cmodules.rst
natmod.rst

View File

@ -4,7 +4,7 @@ Getting Started
===============
This guide covers a step-by-step process on setting up version control, obtaining and building
a copy of the source code for a port, building the documentation, running tests, and a description of the
a copy of the source code for a port, building the documentation, running tests, and a description of the
directory structure of the MicroPython code base.
Source control with git
@ -16,7 +16,7 @@ code is pulled and pushed to and from the main repository. Install the respectiv
of Git for your operating system to follow through the rest of the steps.
.. note::
For a reference on the installation instructions, please refer to
For a reference on the installation instructions, please refer to
the `Git installation instructions <https://git-scm.com/book/en/v2/Getting-Started-Installing-Git>`_.
Learn about the basic git commands in this `Git Handbook <https://guides.github.com/introduction/git-handbook/>`_
or any other sources on the internet.
@ -58,12 +58,12 @@ MicroPython repository.
After the above configuration, your setup should be similar to this:
.. code-block:: bash
$ git remote -v
origin https://github.com/<your-user-name>/micropython (fetch)
origin https://github.com/<your-user-name>/micropython (push)
upstream https://github.com/micropython/micropython (fetch)
upstream https://github.com/micropython/micropython (push)
origin https://github.com/<your-user-name>/micropython (fetch)
origin https://github.com/<your-user-name>/micropython (push)
upstream https://github.com/micropython/micropython (fetch)
upstream https://github.com/micropython/micropython (push)
You should now have a copy of the source code. By default, you are pointing
to the master branch. To prepare for further development, it is recommended
@ -73,7 +73,7 @@ to work on a development branch.
$ git checkout -b dev-branch
You can give it any name. You will have to compile MicroPython whenever you change
You can give it any name. You will have to compile MicroPython whenever you change
to a different branch.
Compile and build the code
@ -140,8 +140,8 @@ If it built successfully, you should see a message similar to this:
.. code-block:: bash
LINK mpy-cross
text data bss dec hex filename
279328 776 880 280984 44998 mpy-cross
text data bss dec hex filename
279328 776 880 280984 44998 mpy-cross
.. note::
@ -181,8 +181,8 @@ If MicroPython built correctly, you should see the following:
.. code-block:: bash
LINK micropython
text data bss dec hex filename
412033 5680 2496 420209 66971 micropython
text data bss dec hex filename
412033 5680 2496 420209 66971 micropython
Now run it:
@ -215,7 +215,7 @@ as detailed in the :ref:`required_dependencies` section, then build:
$ make submodules
$ make
Please refer to the `stm32 documentation <https://github.com/micropython/micropython/tree/master/ports/stm32>`_
Please refer to the `stm32 documentation <https://github.com/micropython/micropython/tree/master/ports/stm32>`_
for more details on flashing the firmware.
.. note::
@ -259,7 +259,7 @@ Build the docs:
$ make html
Open ``docs/build/html/index.html`` in your browser to view the docs locally. Refer to the
Open ``docs/build/html/index.html`` in your browser to view the docs locally. Refer to the
documentation on `importing your documentation
<https://docs.readthedocs.io/en/stable/intro/import-guide.html>`_ to use Read the Docs.

View File

@ -5,7 +5,7 @@ This chapter covers a tour of MicroPython from the perspective of a developer, c
to MicroPython. It acts as a comprehensive resource on the implementation details of MicroPython
for both novice and expert contributors.
Development around MicroPython usually involves modifying the core runtime, porting or
Development around MicroPython usually involves modifying the core runtime, porting or
maintaining a new library. This guide describes at great depth, the implementation
details of MicroPython including a getting started guide, compiler internals, porting
MicroPython to a new platform and implementing a core MicroPython library.
@ -24,4 +24,3 @@ MicroPython to a new platform and implementing a core MicroPython library.
publiccapi.rst
extendingmicropython.rst
porting.rst

View File

@ -59,7 +59,7 @@ Processing happens in the following stages:
information. Note that this step only uses files that have changed, which
means that ``qstr.i.last`` will only contain data from files that have
changed since the last compile.
2. ``qstr.split`` is an empty file created after running ``makeqstrdefs.py split``
on qstr.i.last. It's just used as a dependency to indicate that the step ran.
This script outputs one file per input C file, ``genhdr/qstr/...file.c.qstr``,

View File

@ -415,14 +415,14 @@ I2S bus
See :ref:`machine.I2S <machine.I2S>`. ::
from machine import I2S, Pin
i2s = I2S(0, sck=Pin(13), ws=Pin(14), sd=Pin(34), mode=I2S.TX, bits=16, format=I2S.STEREO, rate=44100, ibuf=40000) # create I2S object
i2s.write(buf) # write buffer of audio samples to I2S device
i2s = I2S(1, sck=Pin(33), ws=Pin(25), sd=Pin(32), mode=I2S.RX, bits=16, format=I2S.MONO, rate=22050, ibuf=40000) # create I2S object
i2s.readinto(buf) # fill buffer with audio samples from I2S device
The I2S class is currently available as a Technical Preview. During the preview period, feedback from
The I2S class is currently available as a Technical Preview. During the preview period, feedback from
users is encouraged. Based on this feedback, the I2S class API and implementation may be changed.
ESP32 has two I2S buses with id=0 and id=1

View File

@ -34,8 +34,8 @@ Please refer to the documentation for your board for further details.
Getting the firmware
--------------------
The first thing you need to do is download the most recent MicroPython firmware
.bin file to load onto your ESP32 device. You can download it from the
The first thing you need to do is download the most recent MicroPython firmware
.bin file to load onto your ESP32 device. You can download it from the
`MicroPython downloads page <https://micropython.org/download#esp32>`_.
From here, you have 3 main choices:

View File

@ -41,8 +41,8 @@ Please refer to the documentation for your board for further details.
Getting the firmware
--------------------
The first thing you need to do is download the most recent MicroPython firmware
.bin file to load onto your ESP8266 device. You can download it from the
The first thing you need to do is download the most recent MicroPython firmware
.bin file to load onto your ESP8266 device. You can download it from the
`MicroPython downloads page <http://micropython.org/download#esp8266>`_.
From here, you have 3 main choices
@ -64,7 +64,7 @@ such, only daily builds for 512kb modules are provided.
Deploying the firmware
----------------------
Once you have the MicroPython firmware (compiled code), you need to load it onto
Once you have the MicroPython firmware (compiled code), you need to load it onto
your ESP8266 device. There are two main steps to do this: first you
need to put your device in boot-loader mode, and second you need to copy across
the firmware. The exact procedure for these steps is highly dependent on the

View File

@ -4,7 +4,7 @@
.. module:: esp
:synopsis: functions related to the ESP8266 and ESP32
The ``esp`` module contains specific functions related to both the ESP8266 and
The ``esp`` module contains specific functions related to both the ESP8266 and
ESP32 modules. Some functions are only available on one or the other of these
ports.

View File

@ -23,7 +23,7 @@ Functions
Pop the first item from the ``heap``, and return it. Raise ``IndexError`` if
``heap`` is empty.
The returned item will be the smallest item in the ``heap``.
.. function:: heapify(x)

View File

@ -313,7 +313,7 @@ Advanced commands
specified by :meth:`LCD160CR.set_spi_win`, starting from the top-left corner.
The `framebuf <framebuf.html>`_ module can be used to construct frame buffers
and provides drawing primitives. Using a frame buffer will improve
and provides drawing primitives. Using a frame buffer will improve
performance of animations when compared to drawing directly to the screen.
.. method:: LCD160CR.set_scroll(on)

View File

@ -27,13 +27,13 @@ Constructors
Create an ADC object associated with the given pin.
This allows you to then read analog values on that pin.
For more info check the `pinout and alternate functions
table. <https://raw.githubusercontent.com/wipy/wipy/master/docs/PinOUT.png>`_
table. <https://raw.githubusercontent.com/wipy/wipy/master/docs/PinOUT.png>`_
.. warning::
.. warning::
ADC pin input range is 0-1.4V (being 1.8V the absolute maximum that it
can withstand). When GP2, GP3, GP4 or GP5 are remapped to the
ADC block, 1.8 V is the maximum. If these pins are used in digital mode,
ADC pin input range is 0-1.4V (being 1.8V the absolute maximum that it
can withstand). When GP2, GP3, GP4 or GP5 are remapped to the
ADC block, 1.8 V is the maximum. If these pins are used in digital mode,
then the maximum allowed input is 3.6V.
Methods

View File

@ -4,91 +4,91 @@
class I2S -- Inter-IC Sound bus protocol
========================================
I2S is a synchronous serial protocol used to connect digital audio devices.
I2S is a synchronous serial protocol used to connect digital audio devices.
At the physical level, a bus consists of 3 lines: SCK, WS, SD.
The I2S class supports controller operation. Peripheral operation is not supported.
The I2S class is currently available as a Technical Preview. During the preview period, feedback from
The I2S class is currently available as a Technical Preview. During the preview period, feedback from
users is encouraged. Based on this feedback, the I2S class API and implementation may be changed.
I2S objects can be created and initialized using::
from machine import I2S
from machine import Pin
# ESP32
sck_pin = Pin(14) # Serial clock output
ws_pin = Pin(13) # Word clock output
sd_pin = Pin(12) # Serial data output
or
# PyBoards
sck_pin = Pin("Y6") # Serial clock output
ws_pin = Pin("Y5") # Word clock output
sd_pin = Pin("Y8") # Serial data output
audio_out = I2S(2,
audio_out = I2S(2,
sck=sck_pin, ws=ws_pin, sd=sd_pin,
mode=I2S.TX,
bits=16,
mode=I2S.TX,
bits=16,
format=I2S.MONO,
rate=44100,
rate=44100,
ibuf=20000)
audio_in = I2S(2,
audio_in = I2S(2,
sck=sck_pin, ws=ws_pin, sd=sd_pin,
mode=I2S.RX,
bits=32,
mode=I2S.RX,
bits=32,
format=I2S.STEREO,
rate=22050,
rate=22050,
ibuf=20000)
3 modes of operation are supported:
- blocking
- non-blocking
- blocking
- non-blocking
- uasyncio
blocking::
num_written = audio_out.write(buf) # blocks until buf emptied
num_read = audio_in.readinto(buf) # blocks until buf filled
non-blocking::
audio_out.irq(i2s_callback) # i2s_callback is called when buf is emptied
num_written = audio_out.write(buf) # returns immediately
audio_in.irq(i2s_callback) # i2s_callback is called when buf is filled
num_read = audio_in.readinto(buf) # returns immediately
num_read = audio_in.readinto(buf) # returns immediately
uasyncio::
swriter = uasyncio.StreamWriter(audio_out)
swriter.write(buf)
await swriter.drain()
sreader = uasyncio.StreamReader(audio_in)
num_read = await sreader.readinto(buf)
Constructor
-----------
.. class:: I2S(id, *, sck, ws, sd, mode, bits, format, rate, ibuf)
Construct an I2S object of the given id:
- ``id`` identifies a particular I2S bus.
- ``id`` identifies a particular I2S bus.
``id`` is board and port specific:
- PYBv1.0/v1.1: has one I2S bus with id=2.
- PYBD-SFxW: has two I2S buses with id=1 and id=2.
- ESP32: has two I2S buses with id=0 and id=1.
- PYBD-SFxW: has two I2S buses with id=1 and id=2.
- ESP32: has two I2S buses with id=0 and id=1.
Keyword-only parameters that are supported on all ports:
- ``sck`` is a pin object for the serial clock line
- ``ws`` is a pin object for the word select line
- ``sd`` is a pin object for the serial data line
@ -97,9 +97,9 @@ Constructor
- ``format`` specifies channel format, STEREO or MONO
- ``rate`` specifies audio sampling rate (samples/s)
- ``ibuf`` specifies internal buffer length (bytes)
For all ports, DMA runs continuously in the background and allows user applications to perform other operations while
sample data is transfered between the internal buffer and the I2S peripheral unit.
For all ports, DMA runs continuously in the background and allows user applications to perform other operations while
sample data is transfered between the internal buffer and the I2S peripheral unit.
Increasing the size of the internal buffer has the potential to increase the time that user applications can perform non-I2S operations
before underflow (e.g. ``write`` method) or overflow (e.g. ``readinto`` method).
@ -109,37 +109,37 @@ Methods
.. method:: I2S.init(sck, ...)
see Constructor for argument descriptions
.. method:: I2S.deinit()
Deinitialize the I2S bus
.. method:: I2S.readinto(buf)
Read audio samples into the buffer specified by ``buf``. ``buf`` must support the buffer protocol, such as bytearray or array.
"buf" byte ordering is little-endian. For Stereo format, left channel sample precedes right channel sample. For Mono format,
Read audio samples into the buffer specified by ``buf``. ``buf`` must support the buffer protocol, such as bytearray or array.
"buf" byte ordering is little-endian. For Stereo format, left channel sample precedes right channel sample. For Mono format,
the left channel sample data is used.
Returns number of bytes read
Returns number of bytes read
.. method:: I2S.write(buf)
Write audio samples contained in ``buf``. ``buf`` must support the buffer protocol, such as bytearray or array.
"buf" byte ordering is little-endian. For Stereo format, left channel sample precedes right channel sample. For Mono format,
"buf" byte ordering is little-endian. For Stereo format, left channel sample precedes right channel sample. For Mono format,
the sample data is written to both the right and left channels.
Returns number of bytes written
Returns number of bytes written
.. method:: I2S.irq(handler)
Set a callback. ``handler`` is called when ``buf`` is emptied (``write`` method) or becomes full (``readinto`` method).
Set a callback. ``handler`` is called when ``buf`` is emptied (``write`` method) or becomes full (``readinto`` method).
Setting a callback changes the ``write`` and ``readinto`` methods to non-blocking operation.
``handler`` is called in the context of the MicroPython scheduler.
.. staticmethod:: I2S.shift(*, buf, bits, shift)
bitwise shift of all samples contained in ``buf``. ``bits`` specifies sample size in bits. ``shift`` specifies the number of bits to shift each sample.
Positive for left shift, negative for right shift.
bitwise shift of all samples contained in ``buf``. ``bits`` specifies sample size in bits. ``shift`` specifies the number of bits to shift each sample.
Positive for left shift, negative for right shift.
Typically used for volume control. Each bit shift changes sample volume by 6dB.
Constants
---------

View File

@ -32,7 +32,7 @@ Constructors
.. class:: SD(id,... )
Create a SD card object. See ``init()`` for parameters if initialization.
Create a SD card object. See ``init()`` for parameters if initialization.
Methods
-------

View File

@ -50,7 +50,7 @@ vary from platform to platform.
- *mosi* can be used to specify an SPI mosi pin.
- *cs* can be used to specify an SPI chip select pin.
- *freq* selects the SD/MMC interface frequency in Hz (only supported on the ESP32).
Implementation-specific details

View File

@ -50,9 +50,9 @@ Methods
- ``mode`` can be one of:
- ``TimerWiPy.ONE_SHOT`` - The timer runs once until the configured
- ``TimerWiPy.ONE_SHOT`` - The timer runs once until the configured
period of the channel expires.
- ``TimerWiPy.PERIODIC`` - The timer runs periodically at the configured
- ``TimerWiPy.PERIODIC`` - The timer runs periodically at the configured
frequency of the channel.
- ``TimerWiPy.PWM`` - Output a PWM signal on a pin.
@ -74,7 +74,7 @@ Methods
The operating mode is is the one configured to the Timer object that was used to
create the channel.
- ``channel`` if the width of the timer is 16-bit, then must be either ``TIMER.A``, ``TIMER.B``.
- ``channel`` if the width of the timer is 16-bit, then must be either ``TIMER.A``, ``TIMER.B``.
If the width is 32-bit then it **must be** ``TIMER.A | TIMER.B``.
Keyword only arguments:

View File

@ -64,7 +64,7 @@ Methods
- *timeout_char* specifies the time to wait between characters (in ms).
- *invert* specifies which lines to invert.
- *flow* specifies which hardware flow control signals to use. The value
is a bitmask.
is a bitmask.
- ``0`` will ignore hardware flow control signals.
- ``UART.RTS`` will enable receive flow control by using the RTS output pin to

View File

@ -24,7 +24,7 @@ Constructors
Create a WDT object and start it. The timeout must be given in milliseconds.
Once it is running the timeout cannot be changed and the WDT cannot be stopped either.
Notes: On the esp32 the minimum timeout is 1 second. On the esp8266 a timeout
cannot be specified, it is determined by the underlying system.

View File

@ -203,7 +203,7 @@ Classes
machine.UART.rst
machine.SPI.rst
machine.I2C.rst
machine.I2S.rst
machine.I2S.rst
machine.RTC.rst
machine.Timer.rst
machine.WDT.rst

View File

@ -120,7 +120,7 @@ Methods
- *value* if not None will set the port output value before enabling the pin.
- *alt* can be used when mode is ``Pin.AF_PP`` or ``Pin.AF_OD`` to set the
index or name of one of the alternate functions associated with a pin.
index or name of one of the alternate functions associated with a pin.
This arg was previously called *af* which can still be used if needed.
Returns: ``None``.

View File

@ -225,20 +225,20 @@ I2S bus
See :ref:`machine.I2S <machine.I2S>`. ::
from machine import I2S, Pin
i2s = I2S(2, sck=Pin('Y6'), ws=Pin('Y5'), sd=Pin('Y8'), mode=I2S.TX, bits=16, format=I2S.STEREO, rate=44100, ibuf=40000) # create I2S object
i2s.write(buf) # write buffer of audio samples to I2S device
i2s = I2S(1, sck=Pin('X5'), ws=Pin('X6'), sd=Pin('Y4'), mode=I2S.RX, bits=16, format=I2S.MONO, rate=22050, ibuf=40000) # create I2S object
i2s.readinto(buf) # fill buffer with audio samples from I2S device
The I2S class is currently available as a Technical Preview. During the preview period, feedback from
The I2S class is currently available as a Technical Preview. During the preview period, feedback from
users is encouraged. Based on this feedback, the I2S class API and implementation may be changed.
PYBv1.0/v1.1 has one I2S bus with id=2.
PYBD-SFxW has two I2S buses with id=1 and id=2.
I2S is shared with SPI.
PYBv1.0/v1.1 has one I2S bus with id=2.
PYBD-SFxW has two I2S buses with id=1 and id=2.
I2S is shared with SPI.
CAN bus (controller area network)
---------------------------------

View File

@ -29,7 +29,7 @@ We will start by using the accelerometer to turn on a light if it is not flat. :
while True:
x = accel.x()
if abs(x) > SENSITIVITY:
if abs(x) > SENSITIVITY:
light.on()
else:
light.off()
@ -61,7 +61,7 @@ use the ``y()`` value and more LEDs we can turn the pyboard into a spirit level.
while True:
x = accel.x()
if x > SENSITIVITY:
if x > SENSITIVITY:
xlights[0].on()
xlights[1].off()
elif x < -SENSITIVITY:
@ -72,7 +72,7 @@ use the ``y()`` value and more LEDs we can turn the pyboard into a spirit level.
xlights[1].off()
y = accel.y()
if y > SENSITIVITY:
if y > SENSITIVITY:
ylights[0].on()
ylights[1].off()
elif y < -SENSITIVITY:

View File

@ -47,7 +47,7 @@ Here, n keeps track of the current LED and every time the loop is executed we cy
One problem you might find is that if you stop the script and then start it again that the LEDs are stuck on from the previous run, ruining our carefully choreographed disco. We can fix this by turning all the LEDs off when we initialise the script and then using a try/finally block. When you press CTRL-C, MicroPython generates a VCPInterrupt exception. Exceptions normally mean something has gone wrong and you can use a try: command to "catch" an exception. In this case it is just the user interrupting the script, so we don't need to catch the error but just tell MicroPython what to do when we exit. The finally block does this, and we use it to make sure all the LEDs are off. The full code is::
leds = [pyb.LED(i) for i in range(1,5)]
for l in leds:
for l in leds:
l.off()
n = 0

View File

@ -73,7 +73,7 @@ indicate that you should type the text after it at the prompt. In the end, once
you have entered the text ``print("hello pyboard!")`` and pressed Enter, the output
on your screen should look like it does above.
If you already know some python you can now try some basic commands here.
If you already know some python you can now try some basic commands here.
If any of this is not working you can try either a hard reset or a soft reset;
see below.

View File

@ -21,7 +21,7 @@ To enter safe mode, do the following steps:
4. The LEDs will then cycle green to orange to green+orange and back again.
5. Keep holding down USR until *only the orange LED is lit*, and then let
go of the USR switch.
6. The orange LED should flash quickly 4 times, and then turn off.
6. The orange LED should flash quickly 4 times, and then turn off.
7. You are now in safe mode.
In safe mode, the ``boot.py`` and ``main.py`` files are not executed, and so

View File

@ -3,7 +3,7 @@ Hints and tips
The following are some examples of the use of the inline assembler and some
information on how to work around its limitations. In this document the term
"assembler function" refers to a function declared in Python with the
"assembler function" refers to a function declared in Python with the
``@micropython.asm_thumb`` decorator, whereas "subroutine" refers to assembler
code called from within an assembler function.
@ -106,8 +106,8 @@ function can return multiple values by assigning them to array elements.
Assembler functions have no means of determining the length of an array:
this will need to be passed to the function.
This use of arrays can be extended to enable more than three arrays to be used.
This is done using indirection: the ``uctypes`` module supports ``addressof()``
This use of arrays can be extended to enable more than three arrays to be used.
This is done using indirection: the ``uctypes`` module supports ``addressof()``
which will return the address of an array passed as its argument. Thus you can
populate an integer array with the addresses of other arrays:

View File

@ -144,7 +144,7 @@ store constant data:
As in the string example, at runtime a reference to the arbitrarily large
integer is assigned to the variable ``bar``. That reference occupies a
single machine word.
single machine word.
It might be expected that tuples of integers could be employed for the purpose
of storing constant data with minimal RAM use. With the current compiler this

View File

@ -36,7 +36,7 @@ Algorithms
~~~~~~~~~~
The most important aspect of designing any routine for performance is ensuring that
the best algorithm is employed. This is a topic for textbooks rather than for a
the best algorithm is employed. This is a topic for textbooks rather than for a
MicroPython guide but spectacular performance gains can sometimes be achieved
by adopting algorithms known for their efficiency.
@ -210,7 +210,7 @@ no adaptation (but see below). It is invoked by means of a function decorator:
buf = self.linebuf # Cached object
# code
There are certain limitations in the current implementation of the native code emitter.
There are certain limitations in the current implementation of the native code emitter.
* Context managers are not supported (the ``with`` statement).
* Generators are not supported.
@ -222,7 +222,7 @@ increase in compiled code size.
The Viper code emitter
----------------------
The optimisations discussed above involve standards-compliant Python code. The
The optimisations discussed above involve standards-compliant Python code. The
Viper code emitter is not fully compliant. It supports special Viper native data types
in pursuit of performance. Integer processing is non-compliant because it uses machine
words: arithmetic on 32 bit hardware is performed modulo 2**32.
@ -237,7 +237,7 @@ bit manipulations. It is invoked using a decorator:
def foo(self, arg: int) -> int:
# code
As the above fragment illustrates it is beneficial to use Python type hints to assist the Viper optimiser.
As the above fragment illustrates it is beneficial to use Python type hints to assist the Viper optimiser.
Type hints provide information on the data types of arguments and of the return value; these
are a standard Python language feature formally defined here `PEP0484 <https://www.python.org/dev/peps/pep-0484/>`_.
Viper supports its own set of types namely ``int``, ``uint`` (unsigned integer), ``ptr``, ``ptr8``,

View File

@ -154,7 +154,7 @@ See :ref:`machine.RTC <machine.RTC>` ::
pass
# do some non blocking operations
# warning printing on an irq via telnet is not
# possible, only via UART
# possible, only via UART
# create a RTC alarm that expires after 5 seconds
rtc.alarm(time=5000, repeat=False)
@ -179,7 +179,7 @@ See :ref:`machine.SD <machine.SD>`. ::
sd = SD()
os.mount(sd, '/sd')
WLAN (WiFi)
WLAN (WiFi)
-----------
See :ref:`network.WLAN <network.WLAN>` and :mod:`machine`. ::

View File

@ -1,10 +1,10 @@
Reset and boot modes
====================
There are soft resets and hard resets.
There are soft resets and hard resets.
- A soft reset simply clears the state of the MicroPython virtual machine,
but leaves hardware peripherals unaffected. To do a soft reset, simply press
- A soft reset simply clears the state of the MicroPython virtual machine,
but leaves hardware peripherals unaffected. To do a soft reset, simply press
**Ctrl+D** on the REPL, or within a script do::
import sys

View File

@ -5,7 +5,7 @@ Timers can be used for a great variety of tasks, calling a function periodically
counting events, and generating a PWM signal are among the most common use cases.
Each timer consists of two 16-bit channels and this channels can be tied together to
form one 32-bit timer. The operating mode needs to be configured per timer, but then
the period (or the frequency) can be independently configured on each channel.
the period (or the frequency) can be independently configured on each channel.
By using the callback method, the timer event can call a Python function.
Example usage to toggle an LED at a fixed frequency::

View File

@ -13,9 +13,9 @@ You can check the current mode (which is always ``WLAN.AP`` after power up)::
>>> wlan.mode()
.. warning::
When you change the WLAN mode following the instructions below, your WLAN
connection to the WiPy will be broken. This means you will not be able
.. warning::
When you change the WLAN mode following the instructions below, your WLAN
connection to the WiPy will be broken. This means you will not be able
to run these commands interactively over the WLAN.
There are two ways around this::