Damien George
b4cc68e4a4
stmhal/led: Refactor LED to use mp_hal_pin_output() init function.
...
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
2016-10-18 14:43:05 +11:00
Dave Hylands
4b2938a4b0
stmhal: Some NETDUINO_PLUS_2 cleanup
...
- Put the I2C bus on the corect pins
- Add the appropriate board_init to power the shield
2016-02-15 10:07:27 +00:00
Paul Sokolovsky
97a0846af9
stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting.
...
To allow to reuse stmhal/diskio for ports which don't have flash but have
other storage devices.
2016-02-06 15:07:01 +02:00
Damien George
f7c4f9a640
stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.
...
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1. Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS. This makes it the same as how I2C is configured.
2015-12-12 15:02:02 +00:00
Eero af Heurlin
2378be4e93
stmhal: Allow to configure UART pins completely via mpconfigboard.h.
2015-05-03 13:48:26 +01:00
Damien George
d15fe5a6b3
stmhal: Make I2C busses and their pins configurable in mpconfigboard.h.
2015-04-18 21:40:59 +01:00
Damien George
8bdbc20e74
stmhal: Make HSE PLL parameters configurable per board.
2015-04-18 21:40:58 +01:00
Dave Hylands
d7f199465f
stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com.
2015-01-21 00:11:04 +00:00
Damien George
181bfb6db2
stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it
...
Since all currently supported boards use pin A9 for this function, the
value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used,
just the fact that it is defined.
Addresses issue #1048 .
2015-01-07 23:54:57 +00:00
Damien George
6dba992182
stmhal: Add config option to disable/enable CAN driver.
2014-10-05 18:05:26 +01:00
Damien George
b766e79510
stmhal: Initial implementation of cc3k module and driver.
...
Pulled in and modified work done by mux/iabdalkader on cc3k driver, from
iabdalkader-cc3k-update branch. That branch was terribly messy and had
too many conflicts to merge neatly.
2014-09-26 00:57:26 +01:00
mux
a75e382a9b
Change MCU name config micro
2014-06-27 00:35:53 +02:00
mux
fe81eea967
Add MICROPY_HW_MICRO_NAME to boards config
2014-06-19 14:40:57 +02:00
Damien George
ae8feac598
stmhal: Wrap CC3000 driver in MICROPY_HW_ENABLE_CC3K.
...
This renames MICROPY_HW_HAS_WLAN to MICROPY_HW_ENABLE_CC3K (since it's a
driver, not a board feature) and wraps all CC3000 code in this #if.
It's disabled for all boards.
2014-05-03 17:32:55 +01:00
Damien George
ff91156d34
stmhal: Improved configurability for I2C and SPI busses.
...
The HAL handles for the I2C/SPI objects are rather large, so we don't
want to unnecessarily include them.
2014-04-20 19:06:15 +01:00
Dave Hylands
f70630c58f
Fix i2c and spi to compile for Netduino Plus 2
2014-04-20 00:06:03 -07:00
Damien George
09d207785c
stmhal: Unify naming of HW config; make SD detect configurable.
...
All board config macros now begin with MICROPY_HW_.
Renamed PYBv10 to PYBV10, since macros should be all uppercase.
Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD
detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
Damien George
b13492f8ad
stmhal: Add DAC driver.
2014-03-24 15:15:33 +00:00
Dave Hylands
ca5444e6cd
stmhal - add pin mapping, gpio, exti, usrsw
2014-03-14 23:41:28 -07:00
Dave Hylands
0a64c92a9c
stmhal - add led support. Add netduino_plus_2 support
...
Tweaked a couple of the USB files to compile if neither dev nor host was defined.
Tested on netduiono plus 2 and stm32f4discovery boards
2014-03-14 09:48:49 -07:00
Dave Hylands
dd38d90724
Initial checkin with STM HAL
...
This compiles and links, but hasn't been tested on a board
yet and even if it was run, it doesn't currently do anything.
2014-03-11 23:55:41 -07:00
