mirror of
https://github.com/licsber/micropython.git
synced 2024-09-20 17:10:24 +08:00
e359b077dd
This will be used by https://micropython.org/download/ to generate the full listing of boards and firmware files. Optionally supports a board.md for additional customisation of the download page, as well as deploy.md for flashing instructions. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
32 lines
1002 B
Markdown
32 lines
1002 B
Markdown
### STM32 via ST-Link
|
|
|
|
Nucleo and Discovery boards typically include a built-in ST-Link programmer.
|
|
|
|
A `.bin` or `.hex` file can be flashed using [st-flash](https://github.com/stlink-org/stlink).
|
|
|
|
```bash
|
|
# Optional erase to clear existing filesystem.
|
|
st-flash erase
|
|
|
|
# Flash .bin
|
|
st-flash write firmware.bin 0x08000000
|
|
# or, flash .hex
|
|
st-flash --format ihex write firmware.hex
|
|
```
|
|
|
|
A `.hex` file can be flashed using [STM32 Cube Programmer](https://www.st.com/en/development-tools/stm32cubeprog.html).
|
|
|
|
```bash
|
|
STM32_Programmer.sh -c port=SWD -d firmware.hex -hardRst
|
|
```
|
|
|
|
### STM32 via DFU
|
|
|
|
Boards with USB support can also be programmed via the ST DFU bootloader, using e.g. [dfu-util](http://dfu-util.sourceforge.net/) or [pydfu.py](https://github.com/micropython/micropython/blob/master/tools/pydfu.py).
|
|
|
|
To enter the bootloader the `BOOT0` pin can be connected to `VCC` during reset, or you can use `machine.bootloader()` from the MicroPython REPL.
|
|
|
|
```bash
|
|
dfu-util --alt 0 -D firmware.dfu
|
|
```
|