mirror of
https://github.com/licsber/micropython.git
synced 2024-09-22 10:00:24 +08:00
468 B
468 B
Program your board using the esptool.py program, found here.
If you are putting MicroPython on your board for the first time then you should first erase the entire flash using:
esptool.py --chip esp32c3 --port /dev/ttyUSB0 erase_flash
From then on program the firmware starting at address 0x0:
esptool.py --chip esp32c3 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x0 esp32c3-20220117-v1.18.bin