Commit Graph

9182 Commits

Author SHA1 Message Date
Damien George
df13ecde06 cc3200/mods: Include stream.h to get definition of mp_stream_p_t. 2018-06-04 16:58:45 +10:00
Damien George
1427f8f593 py/stream: Move definition of mp_stream_p_t from obj.h to stream.h.
Since a long time now, mp_obj_type_t no longer refers explicitly to
mp_stream_p_t but rather to an abstract "const void *protocol".  So there's
no longer any need to define mp_stream_p_t in obj.h and it can go with all
its associated definitions in stream.h.  Pretty much all users of this type
will already include the stream header.
2018-06-04 16:53:17 +10:00
Damien George
309fe39dbb stm32/modnetwork: Fix arg indexing in generic ifconfig method. 2018-06-03 21:50:49 +10:00
Damien George
7d86ac6c01 stm32: Add network driver for Wiznet5k using MACRAW mode and lwIP.
The Wiznet5k series of chips support a MACRAW mode which allows the host to
send and receive Ethernet frames directly.  This can be hooked into the
lwIP stack to provide a full "socket" implementation using this Wiznet
Ethernet device.  This patch adds support for this feature.

To enable the feature one must add the following to mpconfigboard.mk, or
mpconfigport.mk:

    MICROPY_PY_WIZNET5K = 5500

and the following to mpconfigboard.h, or mpconfigport.h:

    #define MICROPY_PY_LWIP (1)

After wiring up the module (X5=CS, X4=RST), usage on a pyboard is:

    import time, network
    nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
    nic.active(1)
    while not nic.isconnected():
        time.sleep_ms(50) # needed to poll the NIC
    print(nic.ifconfig())

Then use the socket module as usual.

Compared to using the built-in TCP/IP stack on the Wiznet module, some
performance is lost in MACRAW mode: with a lot of memory allocated to lwIP
buffers, lwIP gives Around 750,000 bytes/sec max TCP download, compared
with 1M/sec when using the TCP/IP stack on the Wiznet module.
2018-06-01 14:21:38 +10:00
Damien George
5a5bc4a61f drivers/wiznet5k: Fix bug with MACRAW socket calculating packet size. 2018-06-01 13:44:09 +10:00
Damien George
d9f1ecece2 stm32/modnetwork: Provide generic implementation of ifconfig method.
All it needs is a lwIP netif to function.
2018-06-01 13:33:14 +10:00
Damien George
7437215ad7 stm32/modnetwork: Change base entry of NIC object from type to base.
mod_network_nic_type_t doesn't need to be an actual uPy type, it just needs
to be an object.
2018-06-01 13:31:28 +10:00
Damien George
6d87aa54d6 stm32/modnetwork: Don't take netif's down when network is deinited.
It should be up to the NIC itself to decide if the network interface is
removed upon soft reset.  Some NICs can keep the interface up over a soft
reset, which improves usability of the network.
2018-06-01 13:27:06 +10:00
Damien George
ea22406f76 extmod/modussl_mbedtls: Use mbedtls_entropy_func for CTR-DRBG entropy.
If mbedtls_ctr_drbg_seed() is available in the mbedtls bulid then so should
be mbedtls_entropy_func().  Then it's up to the port to configure a valid
entropy source, eg via MBEDTLS_ENTROPY_HARDWARE_ALT.
2018-05-31 21:52:29 +10:00
Damien George
98b9f0fc9d extmod/modussl_mbedtls: Populate sock member right away in wrap_socket.
Otherwise the "sock" member may have an undefined value if wrap_socket
fails with an exception and exits early, and then if the finaliser runs it
will try to close an invalid stream object.

Fixes issue #3828.
2018-05-31 21:47:26 +10:00
Jeff Epler
c60589c02b py/objtype: Fix assertion failures in super_attr by checking type.
Fixes assertion failures and segmentation faults when making calls like:

    super(1, 1).x
2018-05-30 11:14:07 +10:00
Jeff Epler
05b13fd292 py/objtype: Fix assertion failures in mp_obj_new_type by checking types.
Fixes assertion failures when the arguments to type() were not of valid
types, e.g., when making calls like:

    type("", (), 3)
    type("", 3, {})
2018-05-30 11:11:24 +10:00
Damien George
a1acbad27a stm32/flash: Increase H7 flash size to full 2MiB. 2018-05-30 09:54:51 +10:00
rolandvs
958fa74521 stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI.
And update the GPIO init for NUCLEO_H743ZI to consistently use the mphal
functions.
2018-05-30 09:51:19 +10:00
rolandvs
50bc34d4a4 stm32/boards: Split combined alt-func labels and fix some other errors.
Pins with multiple alt-funcs for the same peripheral (eg USART_CTS_NSS)
need to be split into individual alt-funcs for make-pins.py to work
correctly.

This patch changes the following:
- Split `..._CTS_NSS` into `..._CTS/..._NSS`
- Split `..._RTS_DE` into `..._RTS/..._DE`
- Split `JTDO_SWO` into `JTDO/TRACESWO` for consistency
- Fixed `TRACECK` to `TRACECLK` for consistency
2018-05-29 21:37:49 +10:00
Damien George
98d1609358 stm32/README: Update to include STM32F0 in list of supported MCUs. 2018-05-28 22:04:08 +10:00
Damien George
e681372017 stm32/boards: Add NUCLEO_F091RC board configuration files. 2018-05-28 21:49:49 +10:00
Damien George
1163400039 stm32/boards: Add alt-func CSV list and linker script for STM32F091. 2018-05-28 21:49:49 +10:00
Damien George
ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George
4a7d157a5b stm32/boards: Add startup_stm32f0.s for STM32F0 MCUs.
Sourced from STM32Cube_FW_F0_V1.9.0.
2018-05-28 21:49:49 +10:00
Damien George
191e2cf90a lib/stm32lib: Update library to include support for STM32F0 MCUs.
Now points to branch: work-F0-1.9.0+F4-1.16.0+F7-1.7.0+H7-1.2.0+L4-1.8.1
2018-05-28 21:46:20 +10:00
Damien George
6d83468a30 stm32: Allow a board to disable MICROPY_VFS_FAT. 2018-05-28 21:46:20 +10:00
Damien George
5c0685912f stm32/timer: Make timer_get_source_freq more efficient by using regs.
Use direct register access to get the APB clock divider.  This reduces code
size and makes the code more efficient.
2018-05-28 21:46:20 +10:00
Damien George
070937fe93 stm32: Add support for Cortex-M0 CPUs. 2018-05-28 21:46:20 +10:00
Damien George
f497723802 stm32: Allow to have no storage support if there are no block devices.
If no block devices are defined by a board then storage support will be
disabled.  This means there is no filesystem provided by either the
internal flash or external SPI flash.  But the VFS system can still be
enabled and filesystems provided on external devices like an SD card.
2018-05-28 21:45:46 +10:00
Damien George
aa4a7a8732 stm32/usb: Guard USB device code with #if for whether USB is enabled.
With this change, all the USB source code can now be passed through the
compiler even if the MCU does not have a USB peripheral.
2018-05-28 21:45:46 +10:00
Nick Moore
ef4c8e6e97 esp32: Silence ESP-IDF log messages when in raw REPL mode.
This prevents clients such as ampy, mpy-utils, etc getting confused by
extraneous data.
2018-05-28 20:15:08 +10:00
Damien George
dfeaea1441 py/objtype: Remove TODO comment about needing to check for property.
Instance members are always treated as values, even if they are properties.
A test is added to show this is the case.
2018-05-25 10:59:40 +10:00
Damien George
15ddc20436 stm32: Add new component, the mboot bootloader.
Mboot is a custom bootloader for STM32 MCUs.  It can provide a USB DFU
interface on either the FS or HS peripherals, as well as a custom I2C
bootloader interface.
2018-05-24 23:21:19 +10:00
Damien George
f47eeab0ad stm32: Add low-level hardware I2C slave driver. 2018-05-24 23:11:13 +10:00
Damien George
4200018a05 stm32: Remove unneeded HTML release notes from usbdev and usbhost dirs.
These files provide no additional information, all the version and license
information is captured in the relevant files in these subdirectories.

Thanks to @JoeSc for the original patch.
2018-05-24 11:28:54 +10:00
Damien George
df9b7e8f24 esp32/esp32.custom_common.ld: Put soc code in iram0.
This is what the IDF does, it must be done.
2018-05-23 12:57:50 +10:00
Damien George
18e6358480 py/emit: Combine setup with/except/finally into one emit function.
This patch reduces code size by:

   bare-arm:   -16
minimal x86:  -156
   unix x64:  -288
unix nanbox:  -184
      stm32:   -48
     cc3200:   -16
    esp8266:   -96
      esp32:   -16

The last 10 patches combined reduce code size by:

   bare-arm:  -164
minimal x86: -1260
   unix x64: -3416
unix nanbox: -1616
      stm32:  -676
     cc3200:  -232
    esp8266: -1144
      esp32:  -268
2018-05-23 00:35:16 +10:00
Damien George
436e0d4c54 py/emit: Merge build set/slice into existing build emit function.
Reduces code size by:

   bare-arm:    +0
minimal x86:    +0
   unix x64:  -368
unix nanbox:  -248
      stm32:  -128
     cc3200:   -48
    esp8266:  -184
      esp32:   -40
2018-05-23 00:23:36 +10:00
Damien George
d97906ca9a py/emit: Combine import from/name/star into one emit function.
Change in code size is:

   bare-arm:    +4
minimal x86:   -88
   unix x64:  -456
unix nanbox:   -88
      stm32:   -44
     cc3200:    +0
    esp8266:  -104
      esp32:    +8
2018-05-23 00:23:08 +10:00
Damien George
8a513da5a5 py/emit: Combine break_loop and continue_loop into one emit function.
Reduces code size by:

   bare-arm:    +0
minimal x86:    +0
   unix x64:   -80
unix nanbox:    +0
      stm32:   -12
     cc3200:    +0
    esp8266:   -28
      esp32:    +0
2018-05-23 00:23:04 +10:00
Damien George
6211d979ee py/emit: Combine load/store/delete attr into one emit function.
Reduces code size by:

   bare-arm:   -20
minimal x86:  -140
   unix x64:  -408
unix nanbox:  -140
      stm32:   -68
     cc3200:   -16
    esp8266:   -80
      esp32:   -32
2018-05-23 00:22:59 +10:00
Damien George
a4941a8ba4 py/emit: Combine load/store/delete subscr into one emit function.
Reduces code size by:

   bare-arm:    -8
minimal x86:  -104
   unix x64:  -312
unix nanbox:  -120
      stm32:   -60
     cc3200:   -16
    esp8266:   -92
      esp32:   -24
2018-05-23 00:22:55 +10:00
Damien George
d298013939 py/emit: Combine name and global into one func for load/store/delete.
Reduces code size by:

   bare-arm:   -56
minimal x86:  -300
   unix x64:  -576
unix nanbox:  -300
      stm32:  -164
     cc3200:   -56
    esp8266:  -236
      esp32:   -76
2018-05-23 00:22:47 +10:00
Damien George
26b5754092 py/emit: Combine build tuple/list/map emit funcs into one.
Reduces code size by:

   bare-arm:   -24
minimal x86:  -192
   unix x64:  -288
unix nanbox:  -184
      stm32:   -72
     cc3200:   -16
    esp8266:  -148
      esp32:   -32
2018-05-23 00:22:44 +10:00
Damien George
e686c94052 py/emit: Combine yield value and yield-from emit funcs into one.
Reduces code size by:

   bare-arm:   -24
minimal x86:   -72
   unix x64:  -200
unix nanbox:   -72
      stm32:   -52
     cc3200:   -32
    esp8266:   -84
      esp32:   -24
2018-05-23 00:22:35 +10:00
Damien George
0a25fff956 py/emit: Combine fast and deref into one function for load/store/delete.
Reduces code size by:

   bare-arm:   -16
minimal x86:  -208
   unix x64:  -408
unix nanbox:  -248
      stm32:   -12
     cc3200:   -24
    esp8266:   -96
      esp32:   -44
2018-05-23 00:22:20 +10:00
Damien George
400273a799 py/objgenerator: Protect against reentering a generator.
Generators that are already executing cannot be reexecuted.  This patch
puts in a check for such a case.

Thanks to @jepler for finding the bug.
2018-05-22 16:54:03 +10:00
Damien George
771cb359af py/objgenerator: Save state in old_globals instead of local variable.
The code_state.old_globals variable is there to save the globals state so
should be used for this purpose, to avoid the need for additional local
variables on the C stack.
2018-05-22 16:39:19 +10:00
Damien George
20b4b85f72 ports: Enable MICROPY_PY_BUILTINS_ROUND_INT on selected ports. 2018-05-22 14:18:16 +10:00
Jan Klusacek
b318ebf101 py/modbuiltins: Add support for rounding integers.
As per CPython semantics.  This feature is controlled by
MICROPY_PY_BUILTINS_ROUND_INT which is disabled by default.
2018-05-22 14:18:16 +10:00
Damien George
f2ec792554 py/parsenum: Adjust braces so they are balanced. 2018-05-22 13:20:00 +10:00
Damien George
e773a2cdba stm32/main: Use consistent indenting of macro #if's. 2018-05-22 13:17:03 +10:00
Damien George
f68e722005 stm32/rng: Use Yasmarang for rng_get() if MCU doesn't have HW RNG. 2018-05-22 10:36:03 +10:00
Damien George
cda964198a stm32: Integrate lwIP as implementation of usocket module.
This patch allows to use lwIP as the implementation of the usocket module,
instead of the existing socket-multiplexer that delegates the entire TCP/IP
layer to the NIC itself.

This is disabled by default, and enabled by defining MICROPY_PY_LWIP to 1.

When enabled, the lwIP TCP/IP stack will be included in the build with
default settings for memory usage and performance (see
lwip_inc/lwipopts.h).  It is then up to a particular NIC to register itself
with lwIP using the standard lwIP netif API.
2018-05-21 17:36:06 +10:00