Commit Graph

41 Commits

Author SHA1 Message Date
Dave Hylands
a589fa3e0b stmhal: Update pin print to print new constants
This updates the print function for machine.Pin to
print out the new constants from the Hardware API defintion
rather than the legacy definitions.
2016-08-25 16:11:42 +10:00
Damien George
5b3f0b7f39 py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*.
The first argument to the type.make_new method is naturally a uPy type,
and all uses of this argument cast it directly to a pointer to a type
structure.  So it makes sense to just have it a pointer to a type from
the very beginning (and a const pointer at that).  This patch makes
such a change, and removes all unnecessary casting to/from mp_obj_t.
2016-01-11 00:49:27 +00:00
Damien George
731f359292 all: Add py/mphal.h and use it in all ports.
py/mphal.h contains declarations for generic mp_hal_XXX functions, such
as stdio and delay/ticks, which ports should provide definitions for.  A
port will also provide mphalport.h with further HAL declarations.
2015-10-31 19:14:30 +03:00
Damien George
2f96b1982a stmhal: Bring Pin class close to new machine module specification.
Looks like we can use the same Pin class for legacy pyb module and new
machine module.
2015-10-19 22:50:59 +01:00
Paul Sokolovsky
1b586f3a73 py: Rename MP_BOOL() to mp_obj_new_bool() for consistency in naming. 2015-10-11 15:18:15 +03:00
Damien George
0851751615 stmhal: Factor GPIO clock enable logic into mp_hal_gpio_clock_enable.
Extracted GPIO clock enable logic into mp_hal_gpio_clock_enable
and called from anyplace which might need to use GPIO functions
on ports other than A-D.

Thanks to Dave Hylands for the patch.
2015-08-03 00:14:48 +01:00
Dave Hylands
92d4b51ad5 stmhal: Add STM32F7DISC and associated changes. 2015-07-30 00:38:32 +01:00
blmorris
4c45921349 stmhal: Use new %q format to print qstr's in a few more places.
Saves 68 bytes.
2015-04-16 22:30:00 +01:00
Damien George
7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Damien George
3b51b3e90f stmhal: Collect all root pointers together in 1 place.
A GC in stmhal port now only scans true root pointers, not entire BSS.
This reduces base GC time from 1700ms to 900ms.
2015-01-07 23:38:50 +00:00
Damien George
b68d98d61c teensy: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:13:30 +00:00
Damien George
2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Dave Hylands
becbc87fd7 Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
Damien George
ecc88e949c Change some parts of the core API to use mp_uint_t instead of uint/int.
Addressing issue #50, still some way to go yet.
2014-08-30 00:35:11 +01:00
Damien George
2c4e67e32d stmhal, pin: Update documentation. 2014-08-24 18:30:22 +01:00
Dave Hylands
3d945559d4 Added python script to map AF to a pin name
Added some functions to Pin class to query mode, pull, and af
2014-08-24 18:21:08 +01:00
Damien George
2605df3346 stmhal, pin: Save 140 bytes ROM by simplifying pin_print function. 2014-08-09 09:19:37 +01:00
Damien George
04019e365f stmhal, pin: Simplify default value for alternate function init. 2014-08-09 08:51:12 +01:00
Damien George
ea439e59d9 stmhal: Start of documentation for modos and modtime. 2014-08-08 23:30:01 +01:00
Damien George
284efa89ae stmhal/teensy: Use _ instead of - in source file names.
Trying to move towards consistency, let's use _ exclusively in names of
source files (eg .c, .h, .csv).
2014-08-08 22:34:06 +01:00
Damien George
4b67463be1 stmhal: Fix documentation; remove ability to specify af by str. 2014-08-08 22:26:53 +01:00
Dave Hylands
6f418fc1b0 Add support for selecting pin alternate functions from python.
Converts generted pins to use qstrs instead of string pointers.

This patch also adds the following functions:
pyb.Pin.names()
pyb.Pin.af_list()
pyb.Pin.gpio()

dir(pyb.Pin.board) and dir(pyb.Pin.cpu) also produce useful results.

pyb.Pin now takes kw args.

pyb.Pin.__str__ now prints more useful information about the pin
configuration.

I found the following functions in my boot.py to be useful:
```python
def pins():
    for pin_name in dir(pyb.Pin.board):
        pin = pyb.Pin(pin_name)
        print('{:10s} {:s}'.format(pin_name, str(pin)))

def af():
    for pin_name in dir(pyb.Pin.board):
        pin = pyb.Pin(pin_name)
        print('{:10s} {:s}'.format(pin_name, str(pin.af_list())))
```
2014-08-07 23:15:41 -07:00
Damien George
2fe2a05f9f stmhal: Put #if guards around all GPIOx_CLK_ENABLE's.
Specifically, teensy port does not have these macros defined.
2014-08-06 16:40:20 +01:00
Damien George
95ea4f0c95 stmhal: Enable relevant GPIO clock when Pin obj is init'd. 2014-08-06 16:04:57 +01:00
Damien George
ccacdf44b6 stmhal: Clean up reset/soft-reset code; fix bug init'ing VCP exc.
Make a clearer distinction between init functions that must be done
before any scripts can run (xxx_init0) and those that can be safely
deferred (xxx_init).

Fix bug initialising USB VCP exception.  Addresses issue #788.

Re-order some init function to improve reliability of
reset/soft-reset.
2014-08-04 11:09:51 +01:00
Damien George
bb4c6f35c6 py: Make MP_OBJ_NEW_SMALL_INT cast arg to mp_int_t itself.
Addresses issue #724.
2014-07-31 10:49:14 +01:00
Damien George
40f3c02682 Rename machine_(u)int_t to mp_(u)int_t.
See discussion in issue #50.
2014-07-03 13:25:24 +01:00
Damien George
7a37f647a5 Merge branch 'teensy-new' of github.com:dhylands/micropython into dhylands-teensy-new
Conflicts:
	stmhal/pin_named_pins.c
	stmhal/readline.c

Renamed HAL_H to MICROPY_HAL_H.  Made stmhal/mphal.h which intends to
define the generic Micro Python HAL, which in stmhal sits above the ST
HAL.
2014-07-02 13:42:37 +01:00
Dave Hylands
f170735b73 Use mp_const_none to initialize mapper and map_dict 2014-06-25 16:01:19 -07:00
Dave Hylands
4f1b7fec9f Updated teensy to build.
Refactored some stmhal files which are shared with teensy.
2014-06-15 22:48:05 -07:00
Damien George
04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George
baa2afbb58 stmhal: Fix typos in class documentation. 2014-05-03 16:42:27 +01:00
Paul Sokolovsky
9b71b16a94 unix,stmhal: Make "mpconfig.h" be first included, as other headers depend on it. 2014-05-02 18:08:16 +03:00
Dave Hylands
e911cfdb22 Fix pin initialization when a mode argument is provided 2014-05-01 12:15:37 -07:00
Damien George
8d09640b22 stmhal: Add documentation in comments, and script to generate HTML.
Decided to write own script to pull documentation from comments in C code.
Style for writing auto generated documentation is: start line with ///
and then use standard markdown to write the comment.  Keywords
recognised by the scraper begin with backslash.  See code for examples.

Running: python gendoc.py modpyb.c accel.c adc.c dac.c extint.c i2c.c
led.c pin.c rng.c servo.c spi.c uart.c usrsw.c, will generate a HTML
structure in gendoc-out/.

gendoc.py is crude but functional.  Needed something quick, and this was
it.
2014-04-29 22:55:34 +01:00
Damien George
350cb6bf20 stmhal: Fix bug with pin GPIO reading. 2014-04-21 20:18:06 +01:00
Damien George
d689430e79 stmhal: Add SPI class.
Also some updates to compile with latest changes to core py.
2014-04-20 00:16:30 +01:00
Damien George
3d19137442 stmhal: Add pyb.Pin.init method to re-init GPIO pin mode. 2014-04-19 02:17:57 +01:00
Damien George
a8f5d15fc6 stmhal: Update help and comments re gpio changing to Pin. 2014-04-18 22:48:59 +01:00
Damien George
c66d86c5ce stmhal: Big cleanup; merge gpio into Pin; make names consistent.
This is an attempt to clean up the Micro Python API on the pyboard.
Gpio functionality is now in the Pin object, which seems more natural.
Constants for MODE and PULL are now in pyb.Pin.  Names of some
classes have been adjusted to conform to CamelCase.  Other
miscellaneous changes and clean up here and there.
2014-04-18 22:38:09 +01:00
Dave Hylands
f14b92b9e1 REPl working on UART6 with STMHAL 2014-03-12 18:15:55 -07:00