Commit Graph

12762 Commits

Author SHA1 Message Date
robert-hh
90b45efa6a mimxrt/boards/make-pins.py: Allow empty lines and comments in pins.csv. 2021-10-25 23:53:51 +11:00
robert-hh
6754213a9d mimxrt/modmachine: Implement soft_reset() and unique_id() functions. 2021-10-25 23:53:48 +11:00
robert-hh
a12e318948 mimxrt/mpconfigport.h: Enable f-strings. 2021-10-25 23:52:35 +11:00
robert-hh
dc8be7ccad tools/autobuild: Add the MIMXRT1010_EVK board to autobuild.
Having a board now available for testing, this binary can be provided with
good confidence.
2021-10-25 23:52:23 +11:00
robert-hh
c827d4b7ab mimxrt: Extend the help() message and README.md. 2021-10-25 23:52:08 +11:00
robert-hh
e7572776c3 mimxrt: Add dht_readinto() to the mimxrt module, and freeze dht.py.
The change affects dht.py from the drivers directory as well to include the
logic for the mimxrt port.
2021-10-25 23:49:28 +11:00
robert-hh
99221cd118 mimxrt: Fix cycle counter for time.ticks_cpu() and machine.bitstream().
Prior to this commit mp_hal_ticks_cpu() was not started properly.  It only
started when the code was executed with a debugger attached, except for the
Teensy (i.MXRT1062) boards.  As an additional fix, the CYYCNT timer is now
started at boot time.

Also rename mp_hal_ticks_cpu_init() to mp_hal_ticks_cpu_enable().
2021-10-25 15:50:44 +11:00
robert-hh
06d1b02014 mimxrt/dma_channel: Fix the DMA channel management.
The MIMXRT1011 has only 16 channels, so size the channel list accordingly.
2021-10-25 15:50:44 +11:00
robert-hh
101d2ddea3 mimxrt/hal: Remove duplicate definitions from flexspi_hyper_flash.h. 2021-10-25 15:50:44 +11:00
robert-hh
68146aa197 mimxrt/boards: Fix the D14/D15 pin assignment of MIMXRT1050/60/64_EVK.
There are several PCB layouts in the market under the same name.
2021-10-25 15:50:38 +11:00
robert-hh
c2e4759cfa mimxrt/modmachine: Implement machine.WDT() and machine.reset_cause().
The API follows that of rp2, stm32, esp32, and the docs.

    wdt=machine.WDT(0, timeout)

        Timeout is given in ms. The valid range is 500 to 128000 (128
        seconds) with 500 ms granularity. Values outside of that range will
        be silently aligned.

    wdt.feed()

        Resets the watchdog timer (feeding).

    wdt.timeout_ms(value)

        Sets a new timeout and feeds the watchdog.

        This is a new, preliminary method which is not yet documented.

    reset_cause = machine.reset_cause()

        Values returned:

        1  Power On reset
        3  Watchdog reset
        5  Software reset: state after calling machine.reset()

More elaborate API functions are supported by the MCU, like an interrupt
called a certain time after feeding.  But for port cosistency that is not
implemented.
2021-10-25 15:43:56 +11:00
robert-hh
1866ed7e2e mimxrt/eth: Add LAN support and integrate the network module.
This commit implements 10/100 Mbit Ethernet support in the mimxrt port.

The following boards are configured without ETH network:
- MIMXRT1010_EVK
- Teensy 4.0

The following boards are configured with ETH network:
- MIMXRT1020_EVK
- MIMXRT1050_EVK
- MIMXRT1060_EVK
- MIMXRT1064_EVK
- Teensy 4.1

Ethernet support tested with TEENSY 4.1, MIMRTX1020_EVK and MIMXRT1050_EVK.
Build tested with Teensy 4.0 and MIMXRT1010_EVK to be still working.
Compiles and builds properly for MIMXRT1060_EVK and MIMXRT1064_EVK, but not
tested lacking suitable boards.

Tested functions are:
- ping works bothway
- simple UDP transfer works bothway
- ntptime works
- the ftp server works
- secure socker works
- telnet and webrepl works

The MAC address is 0x02 plus 5 bytes from the manifacturing info field,
which can be considered as unique per device.

Some boards do not wire the RESET and INT pin of the PHY transceiver.  For
operation, these are not required.  If they are defined, they will be used.
2021-10-25 15:14:26 +11:00
Philipp Ebensberger
7e62c9707a mimxrt/sdram: Add SDRAM support.
Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be
enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL`
to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`.

When SDRAM support is enabled the whole SDRAM is currently used used
for MicroPython heap.

Signed-off-by: Philipp Ebensberger
2021-10-22 08:23:24 +02:00
Damien George
f4c1389fbc github/workflows: Use Python 3.8 for macos workflow.
Otherwise it gets a more recent version which fails some of the test suite.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-21 16:03:40 +11:00
Mike Wadsten
c3c2c37fbc tests/basics: Add tests for type-checking subclassed exc instances. 2021-10-21 12:42:48 +11:00
Mike Wadsten
fe2bc92b4d py/runtime: Fix crash when exc __new__ doesn't return an exc instance.
See CPython bug https://bugs.python.org/issue39091 for more details.
2021-10-21 12:32:16 +11:00
Damien George
30268c93dc stm32/pendsv: Allow a board to add entries for pendsv_schedule_dispatch.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-20 21:20:18 +11:00
Damien George
69522822de stm32/mpbthciport: Allow a board to hook BT HCI poll functions.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-20 21:20:18 +11:00
Damien George
5f2f9044ff stm32/usbd_cdc_interface: Allow a board to hook into USBD CDC RX events.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-20 21:20:18 +11:00
Andrew Leech
cc42b7c88b unix/modusocket: Support MP_STREAM_POLL in unix socket_ioctl.
Allows asyncio reading of network sockets when MICROPY_PY_USELECT is used
in the build configuration.
2021-10-19 22:48:10 +11:00
Andrew Leech
2ceeabf180 extmod/vfs_posix_file: Support MP_STREAM_POLL in vfs_posix_file_ioctl.
Allows asyncio reading of sys.stdin when MICROPY_PY_USELECT is used in the
build configuration.
2021-10-19 22:47:18 +11:00
Damien George
ba940250a5 esp32/usb: Improve speed of USB CDC output.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-16 00:23:59 +11:00
Damien George
549448e8bb esp32: Enable optimisations and move code to iRAM to boost performance.
This commit enables some significant optimisations for esp32:
- move the VM to iRAM
- move hot parts of the runtime to iRAM (map lookup, load global/name,
  mp_obj_get_type)
- enable MICROPY_OPT_LOAD_ATTR_FAST_PATH
- enable MICROPY_OPT_MAP_LOOKUP_CACHE
- disable assertions
- change from -Os to -O2 for compilation

It's hard to measure performance on esp32 due to external flash and
hardware caching.  But this set of changes improves performance compared to
master by (on a TinyPICO with the GENERIC build, using IDF 4.2.2, running
at 160MHz):

diff of scores (higher is better)
N=100 M=100    esp32-master -> esp32-perf       diff      diff% (error%)
bm_chaos.py           71.28 ->     268.08 :  +196.80 = +276.094% (+/-0.04%)
bm_fannkuch.py        44.10 ->      69.31 :   +25.21 = +57.166% (+/-0.01%)
bm_fft.py           1385.27 ->    2538.23 : +1152.96 = +83.230% (+/-0.01%)
bm_float.py         1060.94 ->    3900.62 : +2839.68 = +267.657% (+/-0.03%)
bm_hexiom.py          10.90 ->      32.79 :   +21.89 = +200.826% (+/-0.02%)
bm_nqueens.py       1000.83 ->    2372.87 : +1372.04 = +137.090% (+/-0.01%)
bm_pidigits.py       288.13 ->     664.40 :  +376.27 = +130.590% (+/-0.46%)
misc_aes.py          102.45 ->     345.69 :  +243.24 = +237.423% (+/-0.01%)
misc_mandel.py      1016.58 ->    2121.92 : +1105.34 = +108.731% (+/-0.01%)
misc_pystone.py      632.91 ->    1801.87 : +1168.96 = +184.696% (+/-0.08%)
misc_raytrace.py      76.66 ->     281.78 :  +205.12 = +267.571% (+/-0.05%)
viper_call0.py       210.63 ->     273.17 :   +62.54 = +29.692% (+/-0.01%)
viper_call1a.py      208.45 ->     269.51 :   +61.06 = +29.292% (+/-0.00%)
viper_call1b.py      185.44 ->     228.25 :   +42.81 = +23.086% (+/-0.01%)
viper_call1c.py      185.86 ->     228.90 :   +43.04 = +23.157% (+/-0.01%)
viper_call2a.py      207.10 ->     267.25 :   +60.15 = +29.044% (+/-0.00%)
viper_call2b.py      173.76 ->     209.42 :   +35.66 = +20.523% (+/-0.00%)

Five tests have more than 3x speed up (200%+).

The performance of the tests bm_fft, bm_pidigits and misc_aes now scale
with CPU frequency (eg changing frequency to 240MHz boosts the performance
of these by 50%), which means they are no longer influenced by timing of
external flash access.  (The viper_call* tests did previously scale with
CPU frequency, and they still do.)

Turning off assertions reduces code size by about 80k, and going from -Os
to -O2 costs about 100k, so the net change in code size (for the GENERIC
board) is about +20k.

If a board wants to enable assertions, or use -Os instead of -O2, that's
still possible by overriding the sdkconfig parameters.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-16 00:07:11 +11:00
Damien George
8412568e7b py: Add wrapper macros so hot VM functions can go in fast code location.
For example, on esp32 they can go in iRAM to improve performance.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-15 23:31:19 +11:00
iabdalkader
eea6cd85b3 stm32/sdram: Enforce gcc opt, and use volatile and DSB in sdram_test.
Ensures consistent behaviour and resolves the D-Cache bug (the "exhaustive"
argument being lost due to cache being turned off) when O0 is used.

The changes in this commit are:

- Change -O0 to -Os because "gcc is considered broken at -O0" according to
  https://github.com/ARM-software/CMSIS_5/issues/620#issuecomment-550235656

- Use volatile for mem_base so the compiler doesn't optimise away reads or
  writes to the SDRAM, which is being tested.

- Use DSB to prevent any other compiler optimisations that would change the
  testing logic.

- Use alternating pattern/antipattern in exhaustive test to catch more
  hardware/configuration errors.

Implementation adapted by @andrewleech, taken directly from investigation
by @iabdalkader and @dpgeorge.

See #7841 and #7869 for further discussion.
2021-10-15 17:59:31 +11:00
NitiKaur
4c9e17e0a1 docs/esp32/tutorial: Add an example of peripheral control via regs. 2021-10-14 23:31:45 +11:00
NitiKaur
763042a287 docs/library/stm.rst: Document the stm module. 2021-10-14 23:19:08 +11:00
NitiKaur
e87b2e8bfa docs/reference/manifest.rst: Add docs for manifest.py files. 2021-10-14 14:03:03 +11:00
NitiKaur
135339ce3a docs/reference/mpremote.rst: Add docs for mpremote. 2021-10-14 13:09:51 +11:00
NitiKaur
c42c1c8718 docs/library/random.rst: Document the random module. 2021-10-13 16:56:37 +11:00
NitiKaur
baa5a76fc0 docs/rp2: Add reference for PIO assembly instructions, and PIO tutorial. 2021-10-13 15:54:49 +11:00
stijn
d42cba0d22 extmod/moduplatform: Improve implementation for PC ports.
Fix identification of 32/64 bit and of the Windows platform and add a
platform string mimicking CPython for the latter.
2021-09-24 13:51:39 +10:00
stijn
ea880d5674 py/builtinimport: Forward all debug printing to MICROPY_DEBUG_PRINTER. 2021-09-24 13:17:19 +10:00
Damien George
ea186de4c5 esp32: Split out WLAN code from modnetwork.c to network_wlan.c.
To match network_lan.c and network_ppp.c, and make it clear what code is
specifically for WLAN support.

Also provide a configuration option MICROPY_PY_NETWORK_WLAN which can be
used to fully disable network.WLAN (it's enabled by default).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:41:35 +10:00
Damien George
f046b50ca5 esp32/main: Add option for a board to hook code into startup sequence.
To do this the board must define MICROPY_BOARD_STARTUP, set
MICROPY_SOURCE_BOARD then define the new start-up code.

For example, in mpconfigboard.h:

    #define MICROPY_BOARD_STARTUP board_startup
    void board_startup(void);

in mpconfigboard.cmake:

    set(MICROPY_SOURCE_BOARD
        ${MICROPY_BOARD_DIR}/board.c
    )

and in a new board.c file in the board directory:

    #include "py/mpconfig.h"

    void board_startup(void) {
        boardctrl_startup();
        // extra custom startup
    }

This follows stm32's boardctrl facilities.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:23:14 +10:00
leo chung
4fdf795efa esp32/mpthreadport: Fix TCB cleanup function so thread_mutex is ready.
Because vPortCleanUpTCB is called by the FreeRTOS idle task, and it checks
thread, but didn't check the thread_mutex.

And if thread is not NULL, but thread_mutex not ready then it will crash
with an error when calling mp_thread_mutex_lock(&thread_mutex, 1).

As suggested by @dpgeorge, move the thread = &thread_entry0 line to the end
of mp_thread_init().

Signed-off-by: leo chung <gewalalb@gmail.com>
2021-09-24 12:12:03 +10:00
Seon Rozenblum
a39a596b79 esp32/machine_pin: Block out IO16 and IO17 when using SPIRAM on ESP32.
Fixes issue #7819.
2021-09-24 10:56:09 +10:00
Seon Rozenblum
35fb90bd57 esp32/usb: Add USB host connection detection for CDC serial output.
This callback allows detecting if there is a USB host connected to the CDC
or not, in which case the stdout_tx should skip CDC TX writing and
flushing or the system will block.

Fixes issue #7820.
2021-09-22 00:42:20 +10:00
Seon Rozenblum
7bf466a281 esp32/README: Updated readme with req IDF vers for ESP32-S2, C3 and S3. 2021-09-22 00:41:02 +10:00
IhorNehrutsa
71111cffba docs/esp32: Explain ESP32 PWM modes, timers, and channels. 2021-09-21 23:28:16 +10:00
IhorNehrutsa
52636fa692 esp32/machine_pwm: Add support for all PWM timers and channels.
This commit allows using all the available PWM timers (up to 8) and
channels (up to 16), without affecting the PWM API.

If a new frequency is set, first it checks if another timer is using the
same frequency.  If yes, then it uses this timer, otherwise, it creates a
new one.  If all timers are used, the user should set an already used
frequency, or de-init a channel.

This work is based on #6276 and #3608.
2021-09-21 23:18:09 +10:00
Stewart Bonnick
0d9429f44c esp32/boards: Add LOLIN_S2_MINI ESP32-S2 board.
To support Lolin S2 Mini ESP32-S2 Variant board.  More information about
this board can be found at https://www.wemos.cc/en/latest/s2/s2_mini.html
2021-09-21 22:49:51 +10:00
iabdalkader
67d1dca9c2 stm32/machine_i2c: Use hardware I2C for STM32H7. 2021-09-21 18:13:28 +10:00
roland van straten
9eff4029ab stm32/boards: Add PF11-BOOT0 to stm32f091_af.csv.
PF11 is added so it can be used as GPIO.
2021-09-21 18:11:42 +10:00
Ned Konz
99bb52047c stm32/boards/NUCLEO_H743ZI: Enable VfsLfs2 on NUCLEO_H743ZI(2) boards. 2021-09-21 18:02:19 +10:00
Ned Konz
8c214ed200 stm32: Extended flash filesystem space to 512K on H743 boards.
The H743 has equal sized pages of 128k, which means the filesystem doesn't
need to be near the beginning.  This commit moves the filesystem to the
very end of flash, and extends it to 512k (4 pages).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-21 18:02:14 +10:00
iabdalkader
782d5b2e53 stm32: Enable platform module.
The HAL version is based on the stm32lib version.
2021-09-19 23:35:44 +10:00
iabdalkader
2c5e9bbdfa extmod: Add platform module.
It contains the compiler version, and underlying system HAL/SDK version.
2021-09-19 23:35:10 +10:00
iabdalkader
38f8e852e0 rp2: Add framework for networking.
MICROPY_PY_NETWORK and MICROPY_PY_USOCKET need to be enabled by a board to
get networking.  No NICs have yet been defined.
2021-09-19 23:20:13 +10:00
iabdalkader
c973cfd2f3 rp2: Add support for bluetooth module using NimBLE. 2021-09-19 23:09:59 +10:00