Commit Graph

12273 Commits

Author SHA1 Message Date
Mike Causer
538b9a9be5 esp32/machine_i2c: Allow boards to configure I2C pins using new macros.
Following how SPI is configured (and how stm32 does it).
2021-05-14 22:22:13 +10:00
Mike Causer
97fee47716 docs/esp8266: Add SSD1306 to quickref and tutorial. 2021-05-14 12:04:21 +10:00
Mike Causer
d43ed087ae docs/esp8266: Mention Signal in GPIO section of quickref. 2021-05-14 12:02:01 +10:00
Mike Causer
85c51a548f docs/esp32: Mention Signal in GPIO section of quickref. 2021-05-14 11:43:47 +10:00
Mike Causer
30cbcf881d docs/esp32: Add APA106 to quickref. 2021-05-14 11:41:42 +10:00
Jeff Epler
94a3f8a4b0 tests/run-tests.py: Parallelize running tests by default.
This significantly reduces the time taken to run the test suite (on the
unix port).  Use `-j1` to disable this feature.

Signed-off-by: Jeff Epler <jepler@gmail.com>
2021-05-14 11:33:31 +10:00
Damien George
43e7e5f00a lib/lwip: Switch to use GitHub mirror repo.
It is hopefully more reliable.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-13 23:40:40 +10:00
stijn
09be0c083c py/objarray: Implement more/less comparisons for array. 2021-05-13 22:16:14 +10:00
stijn
57365d8557 py/objarray: Prohibit comparison of mismatching types.
Array equality is defined as each element being equal but to keep
code size down MicroPython implements a binary comparison.  This
can only be used correctly for elements with the same binary layout
though so turn it into an NotImplementedError when comparing types
for which the binary comparison yielded incorrect results: types
with different sizes, and floating point numbers because nan != nan.
2021-05-13 22:16:14 +10:00
Damien George
6affcb0104 tests/run-multitests.py: Flush stdout for each line of trace output.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-13 16:26:07 +10:00
Damien George
9a0bca2c2a stm32/mboot: Make LEDs and reset-mode selection more configurable.
A board can now customise mboot with:
- MBOOT_LED1, MBOOT_LED2, MBOOT_LED3, MBOOT_LED4: if it needs to have
  different LEDs for mboot compared to the application
- MBOOT_BOARD_LED_INIT: if it needs a fully customised LED init function
- MBOOT_BOARD_LED_STATE: if it needs a fully customised LED state-setting
  function
- MBOOT_BOARD_GET_RESET_MODE: if it needs a fully customised function to
  get the reset mode

With full customisation, the only requirement is a single LED to show the
status of the bootloader (idle, erasing, flashing, etc), which can be
configured to do nothing if needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:57 +10:00
Damien George
6639e282c7 stm32/mboot: Add MBOOT_LEAVE_BOOTLOADER_VIA_RESET option.
It is enabled by default to get the standard behaviour of doing a reset
after it is finished, but can be disabled by a board to jump straight to
the application (likely the board needs to use MBOOT_BOARD_CLEANUP to make
this work).

The application is passed a reset mode of BOARDCTRL_RESET_MODE_BOOTLOADER
if the bootloader was active and entered via a jump.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:52 +10:00
Damien George
9ee116c452 stm32/boardctrl: Adjust logic for running boot.py, main.py.
This new logic is equivalent to the old logic when the only possibilities
for reset_mode are NORMAL, SAFE_MODE and FILESYSTEM, which is the standard
case.  But the new logic also allows other reset_mode values (eg
BOOTLOADER) to run boot.py and main.py.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:47 +10:00
Damien George
ee4ffc1804 stm32/powerctrl: Add MICROPY_HW_ENTER_BOOTLOADER_VIA_RESET option.
When disabled the bootloader is entered via a direct jump.  When enabled
the bootloader is entered via a system reset then a jump.  It's enabled by
default to retain the existing behaviour, which is the recommended way.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:41 +10:00
Damien George
300fc842ce py/mkenv.mk: Don't emit info about BUILD_VERBOSE if it's set.
If the user sets V or BUILD_VERBOSE then they don't need to see this
message.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:22:13 +10:00
Damien George
87e38b3cc8 docs/library/rp2.rst: Fix typo overriden->overridden.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 00:05:55 +10:00
Damien George
18d984c8b2 tests/run-perfbench.py: Fix native feature check.
This was broken by 8459f538eb

Signed-off-by: Damien George <damien@micropython.org>
2021-05-11 23:45:36 +10:00
Ayke van Laethem
70f50c46cc lib/utils: Add ARM semihosting utility functions.
This can be a replacement for a UART in custom ports.
2021-05-11 23:33:12 +10:00
Damien George
4404dababb rp2/CMakeLists.txt: Include tinyusb_common in PICO_SDK_COMPONENTS.
So the TinyUSB headers can be found during qstr processing.

Fixes issue #7236.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-11 12:46:18 +10:00
Chris Greening
cce7096d1a esp32/boards/UM_TINYPICO: Fix include of sdkconfig fragment.
This was broken by 32ec07a350
2021-05-11 09:36:41 +10:00
Damien George
0e87459e2b esp32/boards: Add UM_FEATHERS2 and UM_TINYS2 board definitions.
Based on original commit made by Seon Rozenblum aka @UnexpectedMaker.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-10 16:56:53 +10:00
Seon Rozenblum
32ec07a350 esp32/boards: Rename TINYPICO board to UM_TINYPICO.
And add default hardware SPI 0 pins in mpconfigboard.h, and
CONFIG_LWIP_LOCAL_HOSTNAME in sdkconfig.board.
2021-05-10 16:56:53 +10:00
Damien George
5093d49fae esp32: Extend support for S2 series, and S3 where applicable.
Improvements made:
- PSRAM support for S2
- partition definition for 16MiB flash
- correct ADC and DAC pins
- correct GPIO and IRQ pins
- S3 components in CMakeLists

Based on original commit made by Seon Rozenblum aka @UnexpectedMaker.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-10 16:56:53 +10:00
Damien George
4cdcbdb753 tests/thread: Make exc1,exit1,exit2,stacksize1,start1 tests run on rp2.
The RP2040 has 2 cores and supports running at most 2 Python threads (the
main one plus another), and will raise OSError if a thread cannot be
created because core1 is already in use.  This commit adjusts some thread
tests to be robust against such OSError's.  These tests now pass on rp2
boards.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-10 13:07:16 +10:00
Damien George
b6b39bff47 py/gc: Make gc_lock_depth have a count per thread.
This commit makes gc_lock_depth have one counter per thread, instead of one
global counter.  This makes threads properly independent with respect to
the GC, in particular threads can now independently lock the GC for
themselves without locking it for other threads.  It also means a given
thread can run a hard IRQ without temporarily locking the GC for all other
threads and potentially making them have MemoryError exceptions at random
locations (this really only occurs on MCUs with multiple cores and no GIL,
eg on the rp2 port).

The commit also removes protection of the GC lock/unlock functions, which
is no longer needed when the counter is per thread (and this also fixes the
cas where a hard IRQ calling gc_lock() may stall waiting for the mutex).

It also puts the check for `gc_lock_depth > 0` outside the GC mutex in
gc_alloc, gc_realloc and gc_free, to potentially prevent a hard IRQ from
waiting on a mutex if it does attempt to allocate heap memory (and putting
the check outside the GC mutex is now safe now that there is a
gc_lock_depth per thread).

Signed-off-by: Damien George <damien@micropython.org>
2021-05-10 13:07:16 +10:00
Damien George
d0de16266f rp2/mpthreadport: Add mp_thread_deinit to reset core1 on soft reset.
Any code running on core1 should be stopped on soft-reset (the GC heap is
reset so if code continues to run on core1 it will see corrupt memory).

Signed-off-by: Damien George <damien@micropython.org>
2021-05-09 00:08:30 +10:00
Damien George
7b923d6c72 tests/thread: Make stress_aes.py test run on bare-metal ports.
This is a long-running test, so make it run in reasonable time on slower,
bare-metal ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-08 22:47:03 +10:00
Damien George
9340cfe774 tests/thread: Make stress_create.py test run on esp32.
The esp32 port needs to be idle for finished threads and their resources to
be freed up.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-08 22:47:03 +10:00
Damien George
864e4ecc47 esp32/mpthreadport: Use binary semaphore instead of mutex.
So a lock can be acquired on one Python thread and then released on
another.  A test for this is added.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-08 22:47:03 +10:00
Damien George
31e0b8c71c esp32/mpthreadport: Don't explicitly free thread struct in TCB cleanup.
Because vPortCleanUpTCB runs on the FreeRTOS idle task and cannot execute
any VM or runtime related code like freeing memory.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-08 22:47:03 +10:00
Tim Radvan
fd24e649fd docs/library: Add initial API reference for rp2 module and its classes.
All the method signatures from rp2_pio.c and friends have been taken and
converted to RST format, then explanatory notes added for each signature.

Signed-off-by: Tim Radvan <tim@tjvr.org>
2021-05-08 18:02:04 +10:00
Mike Causer
9eea51b730 drivers/display/ssd1306.py: Add rotate method.
And clean up (make more efficient) display set-up commands.
2021-05-06 15:57:19 +10:00
mishafarms
8ff3520f67 esp32/esp32_rmt: Clear config struct before filling it out.
Or unset entries will have garbage in them.

Signed-off-by: mishafarms <github@mishafarms.us>
2021-05-06 15:53:56 +10:00
Mike Causer
64aebed70e docs/esp8266: Add WDT to quickref. 2021-05-06 15:50:42 +10:00
Mike Causer
a111889705 docs/esp32: Add SDCard to quickref. 2021-05-06 15:48:09 +10:00
Mike Causer
a65942a41d docs/esp32: Add WDT to quickref. 2021-05-06 15:46:28 +10:00
Mike Causer
b98197f950 docs/esp32: Add UART to quickref. 2021-05-06 15:44:53 +10:00
Damien George
47583d8cbd extmod/moductypes: Fix size and offset calculation for ARRAY of FLOAT32.
uctypes.FLOAT32 has a special value representation and
uctypes_struct_scalar_size() should be used instead of GET_SCALAR_SIZE().

Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 13:11:33 +10:00
Damien George
350a66a863 extmod/moductypes: Replace numbers with macro constants.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 12:40:53 +10:00
Damien George
02dc1644b6 extmod/moductypes: Remove double blank lines and debugging printf's.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 12:32:09 +10:00
Damien George
4791d290c6 extmod: Remove old comments used for auto-doc generation.
They are no longer used, and the text in the docs is more up to date.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 12:27:31 +10:00
Damien George
9e29217c73 unix/modffi: Use a union for passing/returning FFI values.
This fixes a bug where double arguments on a 32-bit architecture would not
be passed correctly because they only had 4 bytes of storage (not 8).  It
also fixes a compiler warning/error in return_ffi_value on certian
architectures: array subscript 'double[0]' is partly outside array bounds
of 'ffi_arg[1]' {aka 'long unsigned int[1]'}.

Fixes issue #7064.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 12:17:10 +10:00
Damien George
8172c2e9c5 rp2: Move manifest.py to boards directory.
To match other ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-04 23:39:24 +10:00
Gabriel M Schuyler
0054fff840 docs/pyboard: Fix typo in pyb.Switch tutorial. 2021-05-04 23:05:35 +10:00
Mike Causer
31ac410a4f docs: Fix some spelling mistakes. 2021-05-04 22:58:00 +10:00
Nicko van Someren
6e776a6710 gitignore: Ignore macOS desktop metadata files. 2021-05-04 16:56:16 +10:00
David Lechner
ca0c75f504 stm32/boards: Change default LSI_VALUE to 32000 for F4 MCUs.
In the STM32 HAL libraries, the default value for LSI_VALUE for F4 MCUs is
32 kHz.

Signed-off-by: David Lechner <david@pybricks.com>
2021-05-04 16:53:40 +10:00
Mordy Ovits
d70ab87b2b docs/esp8266: Clarify limitations of SSL in esp8266 and fix typos. 2021-05-04 15:15:34 +10:00
Damien George
2bf1beef5c docs/esp8266: Add instructions on entering programming mode manually.
This adds to the ESP8266 tutorial instructions explaining which pins to
pull low to enter programming mode.

Commit made originally by @ARF1 in #2910.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-04 14:24:40 +10:00
Chris Liechti
4154ffbcba docs/esp8266: Add note about simultaneous use of STA_IF and AP_IF.
See also https://github.com/esp8266/Arduino/issues/1624
2021-05-04 13:48:53 +10:00