Commit Graph

754 Commits

Author SHA1 Message Date
roland van straten
43b576d88d stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions.
- Corrected pin assignments and checked with CubeMX.
- Added additional I2C and UARTs.
- Added Ethernet interface definitions with lwIP and SSL support (but
  Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-19 16:54:33 +11:00
roland van straten
26a78edb49 stm32/boards/NUCLEO_F767ZI: Update pins, peripherals and total flash.
- Removed remarks on DFU/OCD in mpconfigboard.h because deploy-stlink works
  fine too.
- Added more UARTs, I2C, corrected SPI, CAN, etc; verified against CubeMX.
- Adapted pins.csv to remove errors, add omissions, etc. according to
  NUCLEO-144 User Manual.
- Changed linker file stm32f767.ld to reflect correct size of the Flash.
- Tested with LAN and SD card.
2019-12-19 11:43:19 +11:00
roland van straten
8af139e8a4 stm32/boards/NUCLEO_F767ZI: Add pins and config for using an SD card.
The Nucleo board does not have an SD card slot but does have the requisite
pins next to each other and labelled, so provide the configuration for
convenience.
2019-12-19 11:28:47 +11:00
Damien George
fb01415599 stm32/boards/PYBD_SF2: Configure LEDs as inverted, for LED.intensity(). 2019-12-13 17:28:24 +11:00
Damien George
71c6bfd08a stm32/modusocket: Handle case of NULL NIC in socket ioctl. 2019-12-13 14:45:21 +11:00
Damien George
c2eaf56634 stm32/Makefile: Enable max buffer size on W5200 NIC when used with lwIP.
Because in network_wiznet5k the TX/RX buffers are set to 16k each when in
MACRAW mode, which is used with lwIP.
2019-12-13 12:36:12 +11:00
Jim Mussared
b76f0a73bc stm32/main: Fix SKIPSD file detection so SD card is mounted by default.
The condition for skipping was accidentally inverted in
7723dac337

Fixes issue #5400.
2019-12-09 17:01:30 +11:00
Damiano Mazzella
cc634b9e92 stm32/boards/xxx_WB55: Enable littlefs2 on WB55 boards. 2019-12-09 14:07:29 +11:00
Chris Mason
d61e7a6d8a stm32/uart: Add support for UART4/5 on L0 MCUs. 2019-12-05 15:31:41 +11:00
Damien George
40cc7ec677 stm32/mpconfigport.h: Use IRQ_PRI_PENDSV to protect bluetooth ringbuf.
The default protection for the BLE ringbuf is to use
MICROPY_BEGIN_ATOMIC_SECTION, which disables all interrupts. On stm32 it
only needs to disable the lowest priority IRQ, pendsv, because that's the
IRQ level at which the BLE stack is driven.
2019-12-04 13:39:22 +11:00
Damien George
ba5e4841ec stm32/main: Fix auto creation of pyb.Flash on boot with kw-only args. 2019-11-27 22:47:05 +11:00
Damien George
11c22430d4 stm32/boards/NUCLEO_L073RZ: Skip board-pin names for CPU only pins.
This board doesn't have much flash and removing these unneeded names saves
about 900 bytes of code size.
2019-11-27 21:59:47 +11:00
Damien George
77b8f86a5e stm32/qstrdefsport.h: Remove unused qstrs and make USB ones conditional.
qstrs in this file are always included in all builds, even if not used
anywhere.  So remove those that are never needed, and make USB names
conditional on having USB enabled.
2019-11-27 21:59:47 +11:00
Damien George
797c2e8fc2 stm32/storage: Make start/len args of pyb.Flash keyword only.
To allow the future possibility of initial positional args, like flash id.
2019-11-26 21:35:00 +11:00
Damien George
d8057c325a stm32/storage: Change storage_read/write_blocks to return int type.
And return -MP_EIO if calling storage_read_block/storage_write_block fails.
This lines up with the return type and value (negative for error) of the
calls to MICROPY_HW_BDEV_READBLOCKS (and WRITEBLOCKS, and BDEV2 versions).
2019-11-26 00:08:57 +11:00
Damien George
120368ba1a stm32/boards: Enable LFS2 on PYBv1.x and PYBD boards. 2019-11-26 00:08:57 +11:00
Damien George
715e4fc25f stm32/moduos: Add VfsLfs1 and VfsLfs2 to uos module, if enabled. 2019-11-26 00:07:09 +11:00
Damien George
7897f5d9be stm32/main: Auto detect block device used for main filesystem. 2019-11-26 00:07:09 +11:00
Damien George
c169094f61 stm32/storage: Make pyb.Flash configurable, and support ext block proto.
The pyb.Flash() class can now be used to construct objects which reference
sections of the flash storage, starting at a certain offset and going for a
certain length.  Such objects also support the extended block protocol.
The signature for the constructor is: pyb.Flash(start=-1, len=-1).
2019-11-26 00:07:09 +11:00
Damien George
7723dac337 stm32: Generalise flash mounting code so it supports arbitrary FS.
This commit refactors and generalises the boot-mount routine on stm32 so
that it can mount filesystems of arbitrary type.  That is, it no longer
assumes that the filesystem is FAT.  It does this by using mp_vfs_mount()
which does auto-detection of the filesystem type.
2019-11-25 18:10:58 +11:00
Jim Mussared
fbb7646e3b stm32/nimble_hci_uart.c: Prevent scheduler running during CYW-BT wakeup.
Using mp_hal_delay_ms allows the scheduler to run, which might result in
another transmit operation happening, which would bypass the sleep (and
fail).  Use mp_hal_delay_us instead.
2019-11-25 17:32:10 +11:00
Mike Causer
258b147830 stm32/boards/stm32f405_af.csv: Fix typo in ETH_RMII_REF_CLK on PA1. 2019-11-11 12:02:14 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
cddb2dd0c3 stm32/mpthreadport: Include runtime.h to get defn of mp_raise_msg. 2019-11-05 13:20:25 +11:00
Damien George
c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Damien George
32eae53fbc stm32/boards: Enable support for bluetooth on WB55 boards. 2019-11-01 14:58:24 +11:00
Damien George
6a64b280d0 stm32: Add support for RF coprocessor on WB55 MCUs.
This requires a BLE wireless stack firmware to be already programmed in the
secure flash area of the device.
2019-11-01 14:52:17 +11:00
Damien George
40ea1915fc extmod/nimble: Factor out stm32-specific HCI UART RX/TX code. 2019-11-01 12:41:37 +11:00
Damien George
48b25a841b stm32: Add machine.Timer with soft timer implementation.
This commit adds an implementation of machine.Timer backed by the soft
timer mechanism.  It allows an arbitrary number of timers with 1ms
resolution, with an associated Python callback.  The Python-level API
matches existing ports that have a soft timer, and is used as:

    from machine import Timer
    t = Timer(freq=10, callback=lambda t:print(t))
    ...
    t = Timer(mode=Timer.ONE_SHOT, period=2000, callback=lambda t:print(t))
    ...
    t.deinit()
2019-10-31 22:12:55 +11:00
Damien George
a5d97f1db9 stm32: Add soft timer implementation, using SysTick at 1ms resolution.
This commit adds an implementation of a "software timer" with a 1ms
resolution, using SysTick.  It allows unlimited number of concurrent
timers (limited only by memory needed for each timer entry).  They can be
one-shot or periodic, and associated with a Python callback.

There is a very small overhead added to the SysTick IRQ, which could be
further optimised in the future, eg by patching SysTick_Handler code
dynamically.
2019-10-31 22:12:55 +11:00
Damien George
9ec73aedb4 stm32/timer: Fix Timer.freq() calc so mult doesn't overflow uint32_t.
Fixes issue #5280.
2019-10-31 12:49:18 +11:00
Damien George
cfe1c5abf8 extmod/vfs: Rename BP_IOCTL_xxx constants to MP_BLOCKDEV_IOCTL_xxx.
Also rename SEC_COUNT to BLOCK_COUNT and SEC_SIZE to BLOCK_SIZE.
2019-10-29 14:17:29 +11:00
Damien George
9aabb6c01b extmod: Factor out block-device struct to make independent of fatfs. 2019-10-29 12:12:37 +11:00
Jim Mussared
ece4e21a55 stm32/Makefile: Only enable hardware sqrt on parts that support it.
Not enough to detect f7/h7, need to use the specific parts.

Follow-up to 580a2656d1.
2019-10-28 15:08:28 +11:00
Andrew Leech
19ca025b45 stm32/sdram: Fix to use new mpu_config_start/mpu_config_end signature. 2019-10-22 22:02:06 +11:00
Jim Mussared
b02d7e612d extmod/modbluetooth: Rename module to "ubluetooth".
For consistency with "umachine". Now that weak links are enabled
by default for built-in modules, this should be a no-op, but allows
extension of the bluetooth module by user code.

Also move registration of ubluetooth to objmodule rather than
port-specific.
2019-10-22 21:58:05 +11:00
Damien George
d2384efa80 py: Automatically provide weak links from "foo" to "ufoo" module name.
This commit implements automatic module weak links for all built-in
modules, by searching for "ufoo" in the built-in module list if "foo"
cannot be found.  This means that all modules named "ufoo" are always
available as "foo".  Also, a port can no longer add any other weak links,
which makes strict the definition of a weak link.

It saves some code size (about 100-200 bytes) on ports that previously had
lots of weak links.

Some changes from the previous behaviour:
- It doesn't intern the non-u module names (eg "foo" is not interned),
  which saves code size, but will mean that "import foo" creates a new qstr
  (namely "foo") in RAM (unless the importing module is frozen).
- help('modules') no longer lists non-u module names, only the u-variants;
  this reduces duplication in the help listing.

Weak links are effectively the same as having a set of symbolic links on
the filesystem that is searched last.  So an "import foo" will search
built-in modules first, then all paths in sys.path, then weak links last,
importing "ufoo" if it exists.  Thus a file called "foo.py" somewhere in
sys.path will still have precedence over the weak link of "foo" to "ufoo".

See issues: #1740, #4449, #5229, #5241.
2019-10-22 15:30:52 +11:00
Jim Mussared
8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Damien George
12413e92a3 stm32/powerctrlboot: Fix config of systick IRQ priority on F0/L0/WB MCU.
Prior to this commit the systick IRQ priority was set at lowest priority on
F0/L0/WB MCUs, because it was left at the default and never configured.
This commit ensures the priority is configured and sets it to the highest
priority.
2019-10-21 12:23:41 +11:00
Damien George
69b238ec63 stm32/accel: Fix Accel.read() method so it does read a byte.
This bug was introduced in a0f7b4c678
2019-10-18 11:53:34 +11:00
Frederic.Pierson
925f244ab3 stm32/boards: Add NADHAT_PYB405 board. 2019-10-18 11:41:22 +11:00
Frederic.Pierson
28062b5108 stm32/accel: Add support for KXTJ3. 2019-10-18 11:41:22 +11:00
Damien George
3105207aff stm32/accel: Rename MMA I2C macro constants to make it generic. 2019-10-18 11:35:32 +11:00
Damien George
4f2c737b0c stm32/mpu: Save and restore the IRQ state when configuring MPU.
In case IRQs are already disabled during the MPU configuration.

Fixes issue #5152.
2019-10-16 23:12:06 +11:00
iabdalkader
6e4468a2ab stm32/adc: Fix sampling for internal channels on H7 MCUs.
Set to 810 cycles following HAL examples.
2019-10-15 22:08:45 +11:00
iabdalkader
4cee42d864 stm32/adc: Use IS_CHANNEL_INTERNAL macro to check for internal channels. 2019-10-15 22:08:36 +11:00
iabdalkader
d523a377d1 stm32/adc: Remove unused macro and channel check, and fix spacing.
The call to is_adcx_channel is redundant because the channel is already
checked just before calling adc_init_single in adc_make_new.
2019-10-15 22:04:19 +11:00
iabdalkader
cb2b210d45 stm32/adc: Update ADC driver to work with the new H7 HAL.
Use NB_TO_CHANNEL to map decimal numbers to channel numbers.  And use the
correct rank to initialize channels (ADC_REGULAR_RANK_1).
2019-10-15 22:03:54 +11:00
Damien George
287800d6e1 stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed, frozen files are now referenced via
boards/manifest.py.
2019-10-15 21:36:24 +11:00
Damien George
d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00