extmod/nimble: Factor out stm32-specific HCI UART RX/TX code.

This commit is contained in:
Damien George 2019-11-01 12:41:37 +11:00
parent 78145b98ef
commit 40ea1915fc
3 changed files with 46 additions and 42 deletions

View File

@ -42,8 +42,6 @@ static void *hal_uart_tx_arg;
static hal_uart_rx_cb_t hal_uart_rx_cb;
static void *hal_uart_rx_arg;
static uint32_t bt_sleep_ticks;
int hal_uart_init_cbs(uint32_t port, hal_uart_tx_cb_t tx_cb, void *tx_arg, hal_uart_rx_cb_t rx_cb, void *rx_arg) {
hal_uart_tx_cb = tx_cb;
hal_uart_tx_arg = tx_arg;
@ -76,16 +74,6 @@ void hal_uart_start_tx(uint32_t port) {
printf("\n");
#endif
bt_sleep_ticks = mp_hal_ticks_ms();
#ifdef pyb_pin_BT_DEV_WAKE
if (mp_hal_pin_read(pyb_pin_BT_DEV_WAKE) == 1) {
//printf("BT WAKE for TX\n");
mp_hal_pin_low(pyb_pin_BT_DEV_WAKE); // wake up
mp_hal_delay_ms(5); // can't go lower than this
}
#endif
nimble_hci_uart_tx_strn((void*)bt_hci_cmd_buf, len);
}
@ -94,29 +82,7 @@ int hal_uart_close(uint32_t port) {
}
void nimble_uart_process(void) {
int host_wake = 0;
#ifdef pyb_pin_BT_HOST_WAKE
host_wake = mp_hal_pin_read(pyb_pin_BT_HOST_WAKE);
#endif
/*
// this is just for info/tracing purposes
static int last_host_wake = 0;
if (host_wake != last_host_wake) {
printf("HOST_WAKE change %d -> %d\n", last_host_wake, host_wake);
last_host_wake = host_wake;
}
*/
while (nimble_hci_uart_rx_any()) {
uint8_t data = nimble_hci_uart_rx_char();
//printf("UART RX: %02x\n", data);
hal_uart_rx_cb(hal_uart_rx_arg, data);
}
if (host_wake == 1 && mp_hal_pin_read(pyb_pin_BT_DEV_WAKE) == 0) {
if (mp_hal_ticks_ms() - bt_sleep_ticks > 500) {
//printf("BT SLEEP\n");
mp_hal_pin_high(pyb_pin_BT_DEV_WAKE); // let sleep
}
}
nimble_hci_uart_rx(hal_uart_rx_cb, hal_uart_rx_arg);
}
#endif // MICROPY_BLUETOOTH_NIMBLE

View File

@ -26,6 +26,8 @@
#ifndef MICROPY_INCLUDED_EXTMOD_NIMBLE_NIMBLE_HCI_UART_H
#define MICROPY_INCLUDED_EXTMOD_NIMBLE_NIMBLE_HCI_UART_H
#include "extmod/nimble/hal/hal_uart.h"
// To be implemented by the port.
int nimble_hci_uart_configure(uint32_t port);
@ -35,8 +37,7 @@ int nimble_hci_uart_set_baudrate(uint32_t baudrate);
int nimble_hci_uart_activate(void);
mp_uint_t nimble_hci_uart_rx_any();
int nimble_hci_uart_rx_char();
void nimble_hci_uart_rx(hal_uart_rx_cb_t rx_cb, void *rx_arg);
void nimble_hci_uart_tx_strn(const char *str, uint len);
#endif // MICROPY_INCLUDED_EXTMOD_NIMBLE_NIMBLE_HCI_UART_H

View File

@ -28,6 +28,7 @@
#include "py/mphal.h"
#include "uart.h"
#include "pendsv.h"
#include "extmod/nimble/nimble/hci_uart.h"
#include "drivers/cyw43/cywbt.h"
#if MICROPY_BLUETOOTH_NIMBLE
@ -37,6 +38,10 @@
pyb_uart_obj_t bt_hci_uart_obj;
static uint8_t hci_uart_rxbuf[512];
#ifdef pyb_pin_BT_DEV_WAKE
static uint32_t bt_sleep_ticks;
#endif
extern void nimble_poll(void);
mp_obj_t mp_uart_interrupt(mp_obj_t self_in) {
@ -81,15 +86,47 @@ int nimble_hci_uart_activate(void) {
return 0;
}
mp_uint_t nimble_hci_uart_rx_any() {
return uart_rx_any(&bt_hci_uart_obj);
}
void nimble_hci_uart_rx(hal_uart_rx_cb_t rx_cb, void *rx_arg) {
#ifdef pyb_pin_BT_HOST_WAKE
int host_wake = 0;
host_wake = mp_hal_pin_read(pyb_pin_BT_HOST_WAKE);
/*
// this is just for info/tracing purposes
static int last_host_wake = 0;
if (host_wake != last_host_wake) {
printf("HOST_WAKE change %d -> %d\n", last_host_wake, host_wake);
last_host_wake = host_wake;
}
*/
#endif
int nimble_hci_uart_rx_char() {
return uart_rx_char(&bt_hci_uart_obj);
while (uart_rx_any(&bt_hci_uart_obj)) {
uint8_t data = uart_rx_char(&bt_hci_uart_obj);
//printf("UART RX: %02x\n", data);
rx_cb(rx_arg, data);
}
#ifdef pyb_pin_BT_DEV_WAKE
if (host_wake == 1 && mp_hal_pin_read(pyb_pin_BT_DEV_WAKE) == 0) {
if (mp_hal_ticks_ms() - bt_sleep_ticks > 500) {
//printf("BT SLEEP\n");
mp_hal_pin_high(pyb_pin_BT_DEV_WAKE); // let sleep
}
}
#endif
}
void nimble_hci_uart_tx_strn(const char *str, uint len) {
#ifdef pyb_pin_BT_DEV_WAKE
bt_sleep_ticks = mp_hal_ticks_ms();
if (mp_hal_pin_read(pyb_pin_BT_DEV_WAKE) == 1) {
//printf("BT WAKE for TX\n");
mp_hal_pin_low(pyb_pin_BT_DEV_WAKE); // wake up
mp_hal_delay_ms(5); // can't go lower than this
}
#endif
uart_tx_strn(&bt_hci_uart_obj, str, len);
}