Commit Graph

36 Commits

Author SHA1 Message Date
Christopher Tse
ddb53c9458 docs/esp8266/quickref: Add warning block about NeoPixel timing. 2021-01-30 14:36:30 +11:00
Damien George
98182a97c5 docs: Update I2C and SPI docs to add reference to SoftI2C and SoftSPI.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Nick Crabtree
2934e41df0 docs/esp8266: Add quickref documentation for UART on esp8266.
This patch adds quickref documentation for the change in commit
afd0701bf7.  This commit added the ability to
disable the REPL and hence use UART0 for serial communication on the
esp8266, but was not previously documented anywhere.

The text is largely taken from the commit message, with generic information
on using the UART duplicated from the Wipy quickref document.
2020-06-10 22:46:09 +10:00
ketograph
04e7aa0563 docs/esp8266/quickref: Add note that machine.RTC is not fully supported.
See issues #3220 and #3710.
2019-12-17 12:19:27 +11:00
Mike Causer
a2c4cb484d docs: Fix spelling in various parts of the docs. 2019-10-16 14:08:28 +11:00
Mike Causer
5a8f392f09 docs/esp8266: Add ntptime usage to esp8266 quickref. 2019-10-16 14:08:13 +11:00
Damien George
b3e013f60e docs: Unify all the ports into one set of documentation.
With this commit there is now only one entry point into the whole
documentation, which describes the general MicroPython language, and then
from there there are links to information about specific platforms/ports.

This commit doesn't change content (almost, it does fix a few internal
links), it just reorganises things.
2018-10-01 13:53:53 +10:00
Mike Causer
f599a38059 docs/esp8266/quickref: Add quickref info for RTC class. 2017-10-10 15:22:23 +11:00
Paul Sokolovsky
22ca5390f7 docs/esp8266/quickref: Polish Pin.on()/off() examples. 2017-06-02 21:08:23 +03:00
Paul Sokolovsky
272a5d95e0 docs/esp8266: Consistently replace Pin.high/low methods with .on/off. 2017-05-30 07:36:25 +03:00
Damien George
daa5ba5629 docs/esp8266/quickref: Add links from quickref page to machine classes. 2017-04-18 15:28:18 +10:00
puuu
933198c55f docs/*/quickref.rst: Use new semantics of ticks_diff() 2016-11-08 02:01:05 +03:00
Paul Sokolovsky
5c3d75c937 docs/esp8266: Update for new WebREPL setup procedure. 2016-11-06 10:02:33 +03:00
Paul Sokolovsky
b4df3e74e1 docs/esp8266/quickref: Further improvements for SPI subsections.
Consistency and formatting.
2016-09-04 23:31:05 +03:00
Paul Sokolovsky
20da9064d7 docs/esp8266/quickref: Update information on SPI classes.
SPI(1) is not used for hardware SPI. Few more details are provided.
2016-09-04 21:13:55 +03:00
Damien George
76dcaddc0f docs/esp8266/quickref: Add internal links to docs for some modules. 2016-08-29 17:40:36 +10:00
Damien George
13c5a228c9 docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver. 2016-08-29 12:52:50 +10:00
Radomir Dopieralski
ed0a06a93f docs/esp8266/quickref: Fix and update the SPI docs
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
2016-08-28 23:14:45 +10:00
Radomir Dopieralski
8e7dfea803 esp8266/modpybhspi: Add a HSPI module for hardware SPI support
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
Paul Sokolovsky
f84dda7111 docs/esp8266/quickref: Link to installation instructions. 2016-08-07 17:46:27 +03:00
Mike Causer
b4564841b6 docs: Add DHT to ESP8266 Quick Ref and Tutorial 2016-08-01 14:39:57 +03:00
Paul Sokolovsky
d8cc51ea2b docs/esp8266/quickref: Update WebREPL section for 1.8.1 release.
WebREPL is much more stable now.
2016-06-02 20:11:40 +03:00
Paul Sokolovsky
fdf45a718b esp8266/quickref: Use local image of Adafruit Huzzah board.
Using remote image causes problems with tools (partly because the image
is semi-firewalled and can't be accessed by arbitrary tools).
2016-06-01 23:11:49 +03:00
misterdanb
a0a08b4be1 esp8266: Add APA102 serial individually controllable LEDs support.
APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
2016-05-19 22:29:11 +03:00
Radomir Dopieralski
ccb00b7724 docs/esp8266/quickstart: remove i2c examples with stop=False
Since the ``stop`` parameter has been dropped.
2016-05-14 00:02:02 +02:00
Radomir Dopieralski
e89413e9b0 docs/esp8266/quickref: New way to get MAC address 2016-05-10 00:31:57 +02:00
Paul Sokolovsky
d46cd02d95 docs/esp8266/quickref: Add info about WebREPL. 2016-05-01 11:41:46 +03:00
Damien George
348edad888 docs/esp8266: Update quickref to reflect changes to 1-wire and NeoPixel. 2016-04-28 14:31:37 +01:00
Damien George
fcc9d43c6d docs/esp8266: Add info about using deep-sleep mode to quickref. 2016-04-21 12:01:50 +01:00
Paul Sokolovsky
e4cb7c6158 docs/esp8266/quickref: Add note about physical vs logical pin numbers. 2016-04-05 16:30:51 +03:00
Paul Sokolovsky
0cb10b5220 docs/esp8266/quickref: Add note about GPIO16. 2016-03-25 16:48:15 +02:00
Paul Sokolovsky
159f1aaca8 docs/esp8266/quickref: Note that timers supported are virtual ones. 2016-03-25 16:44:13 +02:00
Damien George
2466cb67f8 docs/esp8266: Update quick reference: i2c.readfrom and neopixel example. 2016-03-16 13:37:39 +00:00
Damien George
6b80ebe32e docs/esp8266: Fix indent errors, typos, and add info about REPL UART. 2016-03-09 13:01:32 +00:00
Damien George
4b6077b3fe docs/esp8266: Minor tweaks to quickref, Timer and I2C classes. 2016-03-09 11:02:38 +00:00
Damien George
809fbeefb7 docs: Add esp8266 quick reference page, with basic info. 2016-03-08 23:06:15 +00:00