docs/esp8266/quickref: Further improvements for SPI subsections.

Consistency and formatting.
This commit is contained in:
Paul Sokolovsky 2016-09-04 23:31:05 +03:00
parent 20da9064d7
commit b4df3e74e1

View File

@ -162,8 +162,8 @@ Use the ``machine.ADC`` class::
adc = ADC(0) # create ADC object on ADC pin
adc.read() # read value, 0-1024
SPI bus
-------
Software SPI bus
----------------
There are two SPI drivers. One is implemented in software (bit-banging)
and works on all pins::
@ -191,19 +191,19 @@ and works on all pins::
spi.write_readinto(buf, buf) # write buf to MOSI and read MISO back into buf
Hardware SPI
------------
Hardware SPI bus
----------------
The hardware SPI is faster (up to 80Mhz), but only works on following pins:
``MISO`` is GPIO12, ``MOSI`` is GPIO13, and ``SCK`` is GPIO14. It has the same
methods as SPI, except for the pin parameters for the constructor and init
(as those are fixed).
methods as the bitbanging SPI class above, except for the pin parameters for the
constructor and init (as those are fixed)::
from machine import Pin, SPI
hspi = SPI(1, baudrate=80000000, polarity=0, phase=0)
(SPI(0) is used for FlashROM and not available to users.)
(``SPI(0)`` is used for FlashROM and not available to users.)
I2C bus
-------