Commit Graph

13954 Commits

Author SHA1 Message Date
Jim Mussared
316008046a github/ISSUE_TEMPLATE: Replace forum with Discussions.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-08-30 13:17:07 +10:00
Jim Mussared
64c62f8cf1 README: Simplify and update, and move unix section to separate file.
Changes are:
- Remove unix- and stm32-specific sections (move unix to its own
  README.md), stm32 was duplicated.
- Add links to GitHub Discussions and Discord.
- Update information about the project.
- Add a getting started section.
- Explain `make submodules`.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-08-30 13:11:33 +10:00
Damien George
d108fc9c47 esp32/machine_sdcard: Free SPI bus when deiniting SD card.
So that everything is reset and the SD card can be created again after
calling SDCard.deinit() (and after a soft reset).

Fixes issue #8949.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-30 12:54:18 +10:00
Damien George
730e975091 esp32/boards: Merge manifest_release modules into standard manifest.
Having two separate manifests is confusing.  It's simpler to have the daily
builds use the same configuration as the stable, release builds.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-30 11:34:34 +10:00
Damien George
9a826e0f24 lib/lwip: Update lwIP to v2.1.3, tag STABLE-2_1_3_RELEASE.
There don't seem to be many changes going from v2.1.2 to v2.1.3 of lwIP.
Mostly they are:
- IPv6 fixes and improvements
- changes to apps and other code that MicroPython doesn't use
- comments and tests
- minor bug fixes

In particular there doesn't look to be any change to the API of any
function used by MicroPython.

Network multi tests pass on PYBD_SF2 and PYBD_SF6.  PYBD_SF2, PYBD_SF6 and
PICO_W have unchanged iperf3 performance.  Similar results for networking
on the mimxrt port.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-29 14:41:21 +10:00
Andrew Leech
d521899e18 py/persistentcode: Clarify ValueError when native emitter disabled. 2022-08-29 12:38:49 +10:00
Jim Mussared
bd4e45fd68 tests/unicode: Add test for invalid utf-8 file contents.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:47:27 +10:00
Jim Mussared
6c3d8d38bf py/objstr: Always validate utf-8 for mp_obj_new_str.
All uses of this are either tiny strings or not-known-to-be-safe.

Update comments for mp_obj_new_str_copy and mp_obj_new_str_of_type.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:45:46 +10:00
Jim Mussared
3a910b1565 py/objstr: Optimise mp_obj_new_str_from_vstr for known-safe strings.
The new `mp_obj_new_str_from_utf8_vstr` can be used when you know you
already have a unicode-safe string.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:44:35 +10:00
Jim Mussared
88864587f5 py/objstr: Always ensure mp_obj_str_from_vstr is unicode-safe.
Now that we have `mp_obj_new_str_type_from_vstr` (private helper used by
objstr.c) split from the public API (`mp_obj_new_str_from_vstr`), we can
enforce a unicode check at the public API without incurring a performance
cost on the various objstr.c methods (which are already working on known
unicode-safe strings).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:44:20 +10:00
Jim Mussared
8a0ee5a5c0 py/objstr: Split mp_obj_str_from_vstr into bytes/str versions.
Previously the desired output type was specified.  Now make the type part
of the function name.  Because this function is used in a few places this
saves code size due to smaller call-site.

This makes `mp_obj_new_str_type_from_vstr` a private function of objstr.c
(which is almost the only place where the output type isn't a compile-time
constant).

This saves ~140 bytes on PYBV11.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:43:55 +10:00
Jim Mussared
09879f99ca esp8266/README: Update build instructions to match ci.sh.
The existing non-Docker instructions are basically impossible to follow
because the esp-open-sdk does not compile.  Update these instructions to
use the exact toolchain that our CI uses.

Also split the Docker from non-Docker instructions, to avoid confusion
about which commands need to be prefixed.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 15:19:19 +10:00
Laurens Valk
6dcfb25ae7 docs/library/micropython: Fix spelling of compiler.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
2022-08-26 15:15:59 +10:00
Laurens Valk
da217e83d9 docs/library: Fix nested rst styles not rendering.
These can't be nested, so apply styling separately.

Signed-off-by: Laurens Valk <laurens@pybricks.com>
2022-08-26 15:15:59 +10:00
Tomasz 'CeDeROM' CEDRO
602f9db2f3 docs/library/machine.UART: Add notes about UART init and deinit.
* `init()` can be called multiple times to reconfigure UART.
* After `deinit()` it is impossible to call `init()` again.

Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
2022-08-26 15:13:45 +10:00
Tomasz 'CeDeROM' CEDRO
769262ef03 docs/esp32: Update UART quickref on input-only pins.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
2022-08-26 15:10:47 +10:00
Matt Trentini
6b16ce8d38 docs: Update CPython differences and improve the look of table layouts.
Updated some of the CPython feature differences:
- Updated status of some features.
- Added CSS to fix table widths to 100% and word wrap.
- Specified explicit table column ratios to improve layout appearance.
- Added missing references to anchors.
- Better consistency with use of formatting and case.
2022-08-26 15:09:06 +10:00
Damien George
2e386bcf76 tools/mpremote: Print nicer errors for unsupported 'cp -r' arguments.
Also document support for 'cp :a :b'.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 13:30:03 +10:00
Damien George
f5fedf4676 tools/pyboard.py: Add fs_cp function for direct device-to-device copy.
Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 13:30:03 +10:00
Damien George
24f1161fe2 tools/pyboard.py: Remove implicit fs_put if source starts with ./.
Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 13:30:03 +10:00
Damien George
858707181d tools/mpremote: Print a nicer error when a filesystem command fails.
Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 13:30:03 +10:00
Damien George
7d3f4b23dc drivers/cc3000: Remove CC3000 WiFi driver files.
It's no longer used by any port.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 12:51:37 +10:00
Damien George
1855df6361 stm32: Remove support for CC3000 WiFi driver.
It has been about 8 years since support for this chip was added.  Reasons
to remove it are:
- It is no longer easy to obtain this part.
- There are now many other options for WiFi.
- It's not a good use of developer time to maintain it.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 12:51:37 +10:00
Jim Mussared
986ad6bf1d stm32/boardctrl: Use HAL_Delay instead of mp_hal_delay_ms.
Not safe to use mp_hal_delay_ms before boot if threading is enabled,
because threading will not have been initialised, and
MICROPY_EVENT_POLL_HOOK assumes threading is initialised.

HAL_Delay doesn't call MICROPY_EVENT_POLL_HOOK, but is still
power-efficient like mp_hal_delay_ms (unlike mp_hal_delay_us).

Fixes #7816.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 12:48:04 +10:00
Jim Mussared
492ba5eaf2 stm32: Move board variant config to mpconfigboard.mk.
Rather than having the autobuild know about the particular variants, have
the mpconfigboard.mk describe them and make autobuild discover them
automatically.

Adds a "query-variants" target to stm32/Makefile to allow the set of
possible variants to be queried.

Removes pybv3 from the autobuild as this isn't use by the downloads page.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 09:38:38 +10:00
Andrew Leech
923375380b stm32/boards: Increase mboot region to 32k for WB55 boards.
If mboot is built with support for packing (signing/encryption) it needs up
to 32KiB.  So for simplicity increase the mboot region to 32KiB
unconditionally for WB55 boards (custom WB55 board configurations can still
provide their own linker scripts to override this).
2022-08-25 17:02:56 +10:00
Damiano Mazzella
1fbf0efaeb stm32/sdram: Enable MPU for unaligned access on H7 MCUs.
So that SDRAM can be used as the heap on ARDUINO_PORTENTA_H7, for example.

Fixes issue #9087.
2022-08-25 16:20:51 +10:00
robert-hh
8139cbcf6b esp32/machine_timer: Support all init arguments in Timer constructor.
Following the usual style of instantiation and init().
2022-08-24 17:31:39 +10:00
robert-hh
13dceaa4ea esp32/machine_uart: Change sendbreak time to be at least 15 bit times.
It used to be 10 bit times, which is too short.  The break state must be
longer than a regular character time, at least 13 bit times.  This is now
implemented by reducing the baudrate while sending the "0".  The break time
will now vary with data length and parity setting, but will at least be 15
bit times.

Tested with a GENERIC_SPIRAM, GENERIC_C3 and UM_TINYS2 board.
2022-08-23 17:22:15 +10:00
glenn20
e6e60f4330 esp8266/modnetwork: Add support for WLAN.config(protocol=XX) option.
Following esp32.  This is preferred to using the phy_mode() function.
2022-08-23 16:33:19 +10:00
glenn20
0507f239e8 esp32/modnetwork: Add network.MODE_LR constant.
Adds the MODE_LR constant to the network module to support Espressif's
long-range communication protocol.
2022-08-23 16:33:03 +10:00
glenn20
76f2e3e62b esp32/network_wlan: Add support to set/get the wifi protocol.
Add 'protocol' option to WLAN.config() to support setting/getting the wifi
protocol modes: MODE_11G|MODE_11G|MODE_11N.
2022-08-23 16:32:30 +10:00
glenn20
98d1c50159 esp32/network_wlan: Use esp_wifi_set/get_channel to config wifi channel.
Set the channel with esp_wifi_set_channel(), which adds support for setting
the channel of the STA interface

Get the channel with esp_wifi_get_channel() which returns the actual wifi
channel of the radio, rather than the configured channel.
2022-08-23 16:28:49 +10:00
robert-hh
47c45d0e7f rp2/machine_wdt: Check for the maximum timeout value of watchdog.
The value will be checked for timeout <= 8388.  Notes were added to the
documentation.
2022-08-23 16:26:29 +10:00
robert-hh
8308f9c977 extmod/network_wiznet5k: Use the configured DNS address if available.
Instead of the default 8.8.8.8.  The change was suggested by @omogenot.
2022-08-23 15:00:00 +10:00
robert-hh
71dcb21e24 drivers/wiznet5k: Remove old Wiznet driver.
It has been replaced by the submodule lib/wiznet5k.
2022-08-23 15:00:00 +10:00
robert-hh
f6ec01d1da tools/ci.sh: Split the stm32 builds for wiznet5k and cc3k.
- Add lib/wiznet5k into the 'make submodules' step.
- Split the stm32 builds for wiznet5k and cc3k.
- Run 'make .... clean' after making the wiznet5k build.
2022-08-23 15:00:00 +10:00
robert-hh
54eaa8c8a6 stm32/mphalport: Add mp_hal_get_spi_obj() helper function.
The function spi_from_mp_obj() is kept since it is used by the cc3k driver.
2022-08-23 14:59:48 +10:00
robert-hh
c3305c49e4 stm32: Add definitions required for lwIP version of Wiznet NIC. 2022-08-23 14:58:13 +10:00
robert-hh
717924001d stm32: Switch Wiznet to use lib/wiznet5k and extmod/network_wiznet5k.
Instead of the old Wiznet driver in drivers/wiznet5k.
2022-08-23 14:57:54 +10:00
Chris Waggoner
b1efc1340a mpy-cross,unix: Include alloca.h for NetBSD. 2022-08-23 13:39:18 +10:00
Laurens Valk
d8ad87843a py/builtinimport: Allow overriding of mp_builtin___import__.
This allows ports to override mp_builtin___import__.

This can be useful in MicroPython applications where
MICROPY_ENABLE_EXTERNAL_IMPORT has to be disabled due to its impact on
build size (2% to 2.5% of the minimal port). By overriding the otherwise
very minimal mp_builtin___import__, ports can still allow limited forms
of application-specific imports.

Signed-off-by: Laurens Valk <laurens@pybricks.com>
2022-08-23 13:34:06 +10:00
Damien George
3d65101a8a py: Clean up formatting of union definitions.
Signed-off-by: Damien George <damien@micropython.org>
2022-08-23 13:09:57 +10:00
Damien George
7c8ec85fa3 shared/runtime/sys_stdio_mphal: Make func static and remove some TODOs.
stdio_obj_print is private to this file so can be made static.  The __del__
method does nothing so can be removed (it's only called by the GC if it
exists, so if it doesn't exist it won't be called).  And FileIO doesn't
support a constructor in MicroPython at this stage.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-23 13:02:40 +10:00
Nicholas H.Tollervey
af54d2ce9f
javascript: Rename this port to 'webassembly'. 2022-08-22 12:03:39 +01:00
Jim Mussared
c616721b1a extmod/modframebuf: Improve poly-fill boundary pixels.
Rather than drawing the entire boundary to catch missing pixels, just
detect the cases where boundary pixels are skipped during node calculation
and pre-emptively draw them then.

This adds 72 bytes on PYBV11, but makes filled poly() 20% faster.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-19 23:31:28 +10:00
Mat Booth
04a655c744 extmod/modframebuf: Add polygon drawing methods.
Add method for drawing polygons.

For non-filled polygons, uses the existing line-drawing code to render
arbitrary polygons using the given coords list, at the given x,y position,
in the given colour.

For filled polygons, arbitrary closed polygons are rendered using a fast
point-in-polygon algorithm to determine where the edges of the polygon lie
on each pixel row.

Tests and documentation updates are also included.

Signed-off-by: Mat Booth <mat.booth@gmail.com>
2022-08-19 23:31:28 +10:00
Peter Hinch
42ec9703a0 extmod/modframebuf: Add ellipse drawing method. 2022-08-19 23:31:28 +10:00
Jim Mussared
127b340438 extmod/modframebuf: Add fill argument to rect().
We plan to add `ellipse` and `poly` methods, but rather than having to
implement a `fill_xyz` version of each, we can make them take an optional
fill argument. This commit add this to `rect` as a starting point.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-19 23:31:28 +10:00
Jim Mussared
af1f167820 py/dynruntime: Add mp_obj_is_true.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-19 23:31:11 +10:00