mirror of
https://github.com/licsber/micropython.git
synced 2024-09-21 17:40:24 +08:00
e4650125b8
This commit updates the esp32 port to work exclusively with ESP-IDF v5.
IDF v5 is needed for some of the newer ESP32 SoCs to work, and it also
cleans up a lot of the inconsistencies between existing SoCs (eg S2, S3,
and C3).
Support for IDF v4 is dropped because it's a lot of effort to maintain both
versions at the same time.
The following components have been verified to work on the various SoCs:
ESP32 ESP32-S2 ESP32-S3 ESP32-C3
build pass pass pass pass
SPIRAM pass pass pass N/A
REPL (UART) pass pass pass pass
REPL (USB) N/A pass pass N/A
filesystem pass pass pass pass
GPIO pass pass pass pass
SPI pass pass pass pass
I2C pass pass pass pass
PWM pass pass pass pass
ADC pass pass pass pass
WiFi STA pass pass pass pass
WiFi AP pass pass pass pass
BLE pass N/A pass pass
ETH pass -- -- --
PPP pass pass pass --
sockets pass pass pass pass
SSL pass ENOMEM pass pass
RMT pass pass pass pass
NeoPixel pass pass pass pass
I2S pass pass pass N/A
ESPNow pass pass pass pass
ULP-FSM pass pass pass N/A
SDCard pass N/A N/A pass
WDT pass pass pass pass
Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
81 lines
2.0 KiB
Plaintext
81 lines
2.0 KiB
Plaintext
# MicroPython on ESP32, ESP IDF configuration
|
|
# The following options override the defaults
|
|
|
|
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
|
|
|
|
# Compiler options: use -O2 and disable assertions to improve performance
|
|
CONFIG_COMPILER_OPTIMIZATION_PERF=y
|
|
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=y
|
|
|
|
# Application manager
|
|
CONFIG_APP_EXCLUDE_PROJECT_VER_VAR=y
|
|
CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR=y
|
|
|
|
# Bootloader config
|
|
CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y
|
|
|
|
# Change default log level to "ERROR" (instead of "INFO")
|
|
CONFIG_LOG_DEFAULT_LEVEL_INFO=n
|
|
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
|
|
CONFIG_LOG_DEFAULT_LEVEL=1
|
|
|
|
# Main XTAL Config
|
|
# Only on: ESP32
|
|
CONFIG_XTAL_FREQ_AUTO=y
|
|
|
|
# ESP System Settings
|
|
# Only on: ESP32, ESP32S3
|
|
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=n
|
|
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=n
|
|
|
|
# Power Management
|
|
CONFIG_PM_ENABLE=y
|
|
|
|
# Memory protection
|
|
# This is required to allow allocating IRAM
|
|
CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=n
|
|
|
|
# FreeRTOS
|
|
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=2
|
|
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
|
|
CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP=y
|
|
|
|
# UDP
|
|
CONFIG_LWIP_PPP_SUPPORT=y
|
|
CONFIG_LWIP_PPP_PAP_SUPPORT=y
|
|
CONFIG_LWIP_PPP_CHAP_SUPPORT=y
|
|
|
|
# SSL
|
|
# Use 4kiB output buffer instead of default 16kiB
|
|
CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
|
|
|
|
# ULP coprocessor support
|
|
# Only on: ESP32, ESP32S2, ESP32S3
|
|
CONFIG_ULP_COPROC_ENABLED=y
|
|
CONFIG_ULP_COPROC_TYPE_FSM=y
|
|
CONFIG_ULP_COPROC_RESERVE_MEM=2040
|
|
|
|
# For cmake build
|
|
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
|
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
|
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
|
|
|
# To reduce iRAM usage
|
|
CONFIG_ESP32_WIFI_IRAM_OPT=n
|
|
CONFIG_ESP32_WIFI_RX_IRAM_OPT=n
|
|
|
|
# Legacy ADC Calibration Configuration
|
|
# Only on: ESP32
|
|
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
|
|
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
|
|
CONFIG_ADC_CAL_LUT_ENABLE=y
|
|
|
|
# UART Configuration
|
|
CONFIG_UART_ISR_IN_IRAM=y
|
|
|
|
# IDF 5 deprecated
|
|
CONFIG_ADC_SUPPRESS_DEPRECATE_WARN=y
|
|
CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN=y
|
|
CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y
|
|
CONFIG_I2S_SUPPRESS_DEPRECATE_WARN=y
|