mirror of
https://github.com/licsber/micropython.git
synced 2024-09-20 09:00:23 +08:00
afd0701bf7
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function. Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch). UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this. For example, to attach use:
import uos, machine
uart = machine.UART(0, 115200)
uos.dupterm(uart, 1)
and to detach use:
uos.dupterm(None, 1)
When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None. Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach). When detached the UART(0) can be used for
other purposes.
If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
|
||
|---|---|---|
| .. | ||
| bare-arm | ||
| cc3200 | ||
| esp32 | ||
| esp8266 | ||
| minimal | ||
| pic16bit | ||
| qemu-arm | ||
| stm32 | ||
| teensy | ||
| unix | ||
| windows | ||
| zephyr | ||