mirror of
https://github.com/licsber/micropython.git
synced 2024-09-21 17:40:24 +08:00
689476c576
The implementation uses the LPUARTx devices. Up to 8 UARTs can be used,
given that the pins are accessible. E.g. 8 on Teensy 4.1, 5 on
MIMXRT1020_EVK.
For Tennsy 4.0 and 4.1 the UART numbers are as printed on the pinout 1..N.
The MIMXRT10xx-EVK boards have only one UART named, which gets the number
1. All other UART are assigned to different Pins:
MIMXRT1010-EVK:
D0/D1 UART 1
D6/D7 UART 2
A0/D4 UART 3
MIMXRT1020-EVK:
D0/D1 UART 1
D6/D9 UART 2
D10/D12 UART 3
D14/D15 UART 4
A0/A1 UART 5
MIMXRT1050-EVK, MIMXRT1060-EVK, MIMXRT1064-EVK:
D0/D1 UART 1
D7/D6 UART 2
D8/D9 UART 3
A1/A0 UART 4
30 lines
1.1 KiB
C
30 lines
1.1 KiB
C
#define MICROPY_HW_BOARD_NAME "i.MX RT1050 EVK"
|
|
#define MICROPY_HW_MCU_NAME "MIMXRT1052DVL6B"
|
|
|
|
#define BOARD_FLASH_SIZE (64 * 1024 * 1024)
|
|
|
|
// MIMXRT1050_EVK has 1 user LED
|
|
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_09)
|
|
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
|
|
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
|
|
#define BOARD_FLASH_CONFIG_HEADER_H "evkmimxrt1050_flexspi_nor_config.h"
|
|
|
|
// Define mapping logical UART # to hardware UART #
|
|
// LPUART3 on D0/D1 -> 1
|
|
// LPUART2 on D7/D6 -> 2
|
|
// LPUART6 on D8/D9 -> 3
|
|
// LPUART8 on A1/A0 -> 4
|
|
|
|
#define MICROPY_HW_UART_NUM (sizeof(uart_index_table) / sizeof(uart_index_table)[0])
|
|
#define MICROPY_HW_UART_INDEX { 0, 3, 2, 6, 8 }
|
|
|
|
#define IOMUX_TABLE_UART \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_02_LPUART2_TX }, { IOMUXC_GPIO_AD_B1_03_LPUART2_RX }, \
|
|
{ IOMUXC_GPIO_AD_B1_06_LPUART3_TX }, { IOMUXC_GPIO_AD_B1_07_LPUART3_RX }, \
|
|
{ 0 }, { 0 }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B0_02_LPUART6_TX }, { IOMUXC_GPIO_AD_B0_03_LPUART6_RX }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_10_LPUART8_TX }, { IOMUXC_GPIO_AD_B1_11_LPUART8_RX },
|