micropython/stm/stmusbd/usbd_msc_bot.h

154 lines
4.1 KiB
C

/**
******************************************************************************
* @file usbd_msc_bot.h
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief header for the usbd_msc_bot.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#include "usbd_core.h"
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_MSC_BOT_H
#define __USBD_MSC_BOT_H
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_BOT
* @brief This file is the Header file for usbd_bot.c
* @{
*/
/** @defgroup USBD_CORE_Exported_Defines
* @{
*/
#define BOT_IDLE 0 /* Idle state */
#define BOT_DATA_OUT 1 /* Data Out state */
#define BOT_DATA_IN 2 /* Data In state */
#define BOT_LAST_DATA_IN 3 /* Last Data In Last */
#define BOT_SEND_DATA 4 /* Send Immediate data */
#define BOT_CBW_SIGNATURE 0x43425355
#define BOT_CSW_SIGNATURE 0x53425355
#define BOT_CBW_LENGTH 31
#define BOT_CSW_LENGTH 13
/* CSW Status Definitions */
#define CSW_CMD_PASSED 0x00
#define CSW_CMD_FAILED 0x01
#define CSW_PHASE_ERROR 0x02
/* BOT Status */
#define BOT_STATE_NORMAL 0
#define BOT_STATE_RECOVERY 1
#define BOT_STATE_ERROR 2
#define DIR_IN 0
#define DIR_OUT 1
#define BOTH_DIR 2
/**
* @}
*/
/** @defgroup MSC_CORE_Private_TypesDefinitions
* @{
*/
typedef struct _MSC_BOT_CBW
{
uint32_t dSignature;
uint32_t dTag;
uint32_t dDataLength;
uint8_t bmFlags;
uint8_t bLUN;
uint8_t bCBLength;
uint8_t CB[16];
}
MSC_BOT_CBW_TypeDef;
typedef struct _MSC_BOT_CSW
{
uint32_t dSignature;
uint32_t dTag;
uint32_t dDataResidue;
uint8_t bStatus;
}
MSC_BOT_CSW_TypeDef;
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Types
* @{
*/
extern uint8_t MSC_BOT_Data[];
extern uint16_t MSC_BOT_DataLen;
extern uint8_t MSC_BOT_State;
extern uint8_t MSC_BOT_BurstMode;
extern MSC_BOT_CBW_TypeDef MSC_BOT_cbw;
extern MSC_BOT_CSW_TypeDef MSC_BOT_csw;
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_FunctionsPrototypes
* @{
*/
void MSC_BOT_Init (USB_OTG_CORE_HANDLE *pdev);
void MSC_BOT_Reset (USB_OTG_CORE_HANDLE *pdev);
void MSC_BOT_DeInit (USB_OTG_CORE_HANDLE *pdev);
void MSC_BOT_DataIn (USB_OTG_CORE_HANDLE *pdev,
uint8_t epnum);
void MSC_BOT_DataOut (USB_OTG_CORE_HANDLE *pdev,
uint8_t epnum);
void MSC_BOT_SendCSW (USB_OTG_CORE_HANDLE *pdev,
uint8_t CSW_Status);
void MSC_BOT_CplClrFeature (USB_OTG_CORE_HANDLE *pdev,
uint8_t epnum);
/**
* @}
*/
#endif /* __USBD_MSC_BOT_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/