mirrors/micropython
1
0
Fork 0
mirror of https://github.com/licsber/micropython.git synced 2024-09-20 17:10:24 +08:00
Code Issues Packages Projects Releases Wiki Activity
62b5f42d81
micropython/stmhal/main.c
Damien George 04b9147e15 Add license header to (almost) all files. 
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00

552 lines
15 KiB
C
Raw Blame History

/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdio.h>
#include <string.h>
#include "stm32f4xx_hal.h"
#include "misc.h"
#include "systick.h"
#include "pendsv.h"
#include "mpconfig.h"
#include "qstr.h"
#include "misc.h"
#include "lexer.h"
#include "parse.h"
#include "obj.h"
#include "runtime.h"
#include "gc.h"
#include "gccollect.h"
#include "pybstdio.h"
#include "readline.h"
#include "pyexec.h"
#include "i2c.h"
#include "spi.h"
#include "uart.h"
#include "timer.h"
#include "led.h"
#include "pin.h"
#include "extint.h"
#include "usrsw.h"
#include "usb.h"
#include "rtc.h"
#include "storage.h"
#include "sdcard.h"
#include "ff.h"
#include "lcd.h"
#include "rng.h"
#include "accel.h"
#include "servo.h"
#include "dac.h"
#include "pybwlan.h"
void SystemClock_Config(void);
int errno;
static FATFS fatfs0;
#if MICROPY_HW_HAS_SDCARD
static FATFS fatfs1;
#endif
void flash_error(int n) {
for (int i = 0; i < n; i++) {
led_state(PYB_LED_R1, 1);
led_state(PYB_LED_R2, 0);
HAL_Delay(250);
led_state(PYB_LED_R1, 0);
led_state(PYB_LED_R2, 1);
HAL_Delay(250);
}
led_state(PYB_LED_R2, 0);
}
void __fatal_error(const char *msg) {
for (volatile uint delay = 0; delay < 10000000; delay++) {
}
led_state(1, 1);
led_state(2, 1);
led_state(3, 1);
led_state(4, 1);
stdout_tx_strn("\nFATAL ERROR:\n", 14);
stdout_tx_strn(msg, strlen(msg));
#if 0 && MICROPY_HW_HAS_LCD
lcd_print_strn("\nFATAL ERROR:\n", 14);
lcd_print_strn(msg, strlen(msg));
#endif
for (uint i = 0;;) {
led_toggle(((i++) & 3) + 1);
for (volatile uint delay = 0; delay < 10000000; delay++) {
}
if (i >= 16) {
// to conserve power
__WFI();
}
}
}
void nlr_jump_fail(void *val) {
printf("FATAL: uncaught exception %p\n", val);
__fatal_error("");
}
STATIC mp_obj_t pyb_config_source_dir = MP_OBJ_NULL;
STATIC mp_obj_t pyb_config_main = MP_OBJ_NULL;
STATIC mp_obj_t pyb_config_usb_mode = MP_OBJ_NULL;
STATIC mp_obj_t pyb_source_dir(mp_obj_t source_dir) {
if (MP_OBJ_IS_STR(source_dir)) {
pyb_config_source_dir = source_dir;
}
return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_source_dir_obj, pyb_source_dir);
STATIC mp_obj_t pyb_main(mp_obj_t main) {
if (MP_OBJ_IS_STR(main)) {
pyb_config_main = main;
}
return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_main_obj, pyb_main);
STATIC mp_obj_t pyb_usb_mode(mp_obj_t usb_mode) {
if (MP_OBJ_IS_STR(usb_mode)) {
pyb_config_usb_mode = usb_mode;
}
return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_usb_mode_obj, pyb_usb_mode);
static const char fresh_boot_py[] =
"# boot.py -- run on boot-up\n"
"# can run arbitrary Python, but best to keep it minimal\n"
"\n"
"import pyb\n"
"#pyb.main('main.py') # main script to run after this one\n"
"#pyb.usb_mode('CDC+MSC') # act as a serial and a storage device\n"
"#pyb.usb_mode('CDC+HID') # act as a serial device and a mouse\n"
;
static const char fresh_main_py[] =
"# main.py -- put your code here!\n"
;
static const char fresh_pybcdc_inf[] =
#include "genhdr/pybcdc_inf.h"
;
static const char fresh_readme_txt[] =
"This is a Micro Python board\r\n"
"\r\n"
"You can get started right away by writing your Python code in 'main.py'.\r\n"
"\r\n"
"For a serial prompt:\r\n"
" - Windows: you need to go to 'Device manager', right click on the unknown device,\r\n"
" then update the driver software, using the 'pybcdc.inf' file found on this drive.\r\n"
" Then use a terminal program like Hyperterminal or putty.\r\n"
" - Mac OS X: use the command: screen /dev/tty.usbmodem*\r\n"
" - Linux: use the command: screen /dev/ttyACM0\r\n"
"\r\n"
"Please visit http://micropython.org/help/ for further help.\r\n"
;
int main(void) {
// TODO disable JTAG
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
// set the system clock to be HSE
SystemClock_Config();
// enable GPIO clocks
__GPIOA_CLK_ENABLE();
__GPIOB_CLK_ENABLE();
__GPIOC_CLK_ENABLE();
__GPIOD_CLK_ENABLE();
// enable the CCM RAM
__CCMDATARAMEN_CLK_ENABLE();
#if 0
#if defined(NETDUINO_PLUS_2)
{
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
#if MICROPY_HW_HAS_SDCARD
// Turn on the power enable for the sdcard (PB1)
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_WriteBit(GPIOB, GPIO_Pin_1, Bit_SET);
#endif
// Turn on the power for the 5V on the expansion header (PB2)
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_WriteBit(GPIOB, GPIO_Pin_2, Bit_SET);
}
#endif
#endif
// basic sub-system init
pendsv_init();
timer_tim3_init();
led_init();
#if MICROPY_HW_HAS_SWITCH
switch_init0();
#endif
int first_soft_reset = true;
soft_reset:
// check if user switch held to select the reset mode
led_state(1, 0);
led_state(2, 1);
led_state(3, 0);
led_state(4, 0);
uint reset_mode = 1;
#if MICROPY_HW_HAS_SWITCH
if (switch_get()) {
for (uint i = 0; i < 3000; i++) {
if (!switch_get()) {
break;
}
HAL_Delay(20);
if (i % 30 == 29) {
if (++reset_mode > 3) {
reset_mode = 1;
}
led_state(2, reset_mode & 1);
led_state(3, reset_mode & 2);
led_state(4, reset_mode & 4);
}
}
// flash the selected reset mode
for (uint i = 0; i < 6; i++) {
led_state(2, 0);
led_state(3, 0);
led_state(4, 0);
HAL_Delay(50);
led_state(2, reset_mode & 1);
led_state(3, reset_mode & 2);
led_state(4, reset_mode & 4);
HAL_Delay(50);
}
HAL_Delay(400);
}
#endif
#if MICROPY_HW_ENABLE_RTC
if (first_soft_reset) {
rtc_init();
}
#endif
// more sub-system init
#if MICROPY_HW_HAS_SDCARD
if (first_soft_reset) {
sdcard_init();
}
#endif
if (first_soft_reset) {
storage_init();
}
// GC init
gc_init(&_heap_start, &_heap_end);
// Change #if 0 to #if 1 if you want REPL on UART_6 (or another uart)
// as well as on USB VCP
#if 0
{
mp_obj_t args[2] = {
MP_OBJ_NEW_SMALL_INT(PYB_UART_6),
MP_OBJ_NEW_SMALL_INT(115200),
};
pyb_uart_global_debug = pyb_uart_type.make_new((mp_obj_t)&pyb_uart_type,
ARRAY_SIZE(args),
0, args);
}
#else
pyb_uart_global_debug = NULL;
#endif
// Micro Python init
qstr_init();
mp_init();
mp_obj_list_init(mp_sys_path, 0);
mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR_0_colon__slash_));
mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR_0_colon__slash_lib));
mp_obj_list_init(mp_sys_argv, 0);
readline_init();
pin_init();
extint_init();
#if MICROPY_HW_HAS_LCD
// LCD init (just creates class, init hardware by calling LCD())
lcd_init();
#endif
// local filesystem init
{
// try to mount the flash
FRESULT res = f_mount(&fatfs0, "0:", 1);
if (reset_mode == 3 || res == FR_NO_FILESYSTEM) {
// no filesystem, or asked to reset it, so create a fresh one
// LED on to indicate creation of LFS
led_state(PYB_LED_R2, 1);
uint32_t start_tick = HAL_GetTick();
res = f_mkfs("0:", 0, 0);
if (res == FR_OK) {
// success creating fresh LFS
} else {
__fatal_error("could not create LFS");
}
// create empty main.py
FIL fp;
f_open(&fp, "0:/main.py", FA_WRITE | FA_CREATE_ALWAYS);
UINT n;
f_write(&fp, fresh_main_py, sizeof(fresh_main_py) - 1 /* don't count null terminator */, &n);
// TODO check we could write n bytes
f_close(&fp);
// create .inf driver file
f_open(&fp, "0:/pybcdc.inf", FA_WRITE | FA_CREATE_ALWAYS);
f_write(&fp, fresh_pybcdc_inf, sizeof(fresh_pybcdc_inf) - 1 /* don't count null terminator */, &n);
f_close(&fp);
// create readme file
f_open(&fp, "0:/README.txt", FA_WRITE | FA_CREATE_ALWAYS);
f_write(&fp, fresh_readme_txt, sizeof(fresh_readme_txt) - 1 /* don't count null terminator */, &n);
f_close(&fp);
// keep LED on for at least 200ms
sys_tick_wait_at_least(start_tick, 200);
led_state(PYB_LED_R2, 0);
} else if (res == FR_OK) {
// mount sucessful
} else {
__fatal_error("could not access LFS");
}
}
// make sure we have a 0:/boot.py
{
FILINFO fno;
#if _USE_LFN
fno.lfname = NULL;
fno.lfsize = 0;
#endif
FRESULT res = f_stat("0:/boot.py", &fno);
if (res == FR_OK) {
if (fno.fattrib & AM_DIR) {
// exists as a directory
// TODO handle this case
// see http://elm-chan.org/fsw/ff/img/app2.c for a "rm -rf" implementation
} else {
// exists as a file, good!
}
} else {
// doesn't exist, create fresh file
// LED on to indicate creation of boot.py
led_state(PYB_LED_R2, 1);
uint32_t start_tick = HAL_GetTick();
FIL fp;
f_open(&fp, "0:/boot.py", FA_WRITE | FA_CREATE_ALWAYS);
UINT n;
f_write(&fp, fresh_boot_py, sizeof(fresh_boot_py) - 1 /* don't count null terminator */, &n);
// TODO check we could write n bytes
f_close(&fp);
// keep LED on for at least 200ms
sys_tick_wait_at_least(start_tick, 200);
led_state(PYB_LED_R2, 0);
}
}
// root device defaults to internal flash filesystem
uint root_device = 0;
#if defined(USE_DEVICE_MODE)
usb_storage_medium_t usb_medium = USB_STORAGE_MEDIUM_FLASH;
#endif
#if MICROPY_HW_HAS_SDCARD
// if an SD card is present then mount it on 1:/
if (reset_mode == 1 && sdcard_is_present()) {
FRESULT res = f_mount(&fatfs1, "1:", 1);
if (res != FR_OK) {
printf("[SD] could not mount SD card\n");
} else {
// use SD card as root device
root_device = 1;
if (first_soft_reset) {
// use SD card as medium for the USB MSD
#if defined(USE_DEVICE_MODE)
usb_medium = USB_STORAGE_MEDIUM_SDCARD;
#endif
}
}
}
#else
// Get rid of compiler warning if no SDCARD is configured.
(void)first_soft_reset;
#endif
// run <root>:/boot.py, if it exists
if (reset_mode == 1) {
const char *boot_file;
if (root_device == 0) {
boot_file = "0:/boot.py";
} else {
boot_file = "1:/boot.py";
}
FRESULT res = f_stat(boot_file, NULL);
if (res == FR_OK) {
if (!pyexec_file(boot_file)) {
flash_error(4);
}
}
}
// turn boot-up LEDs off
led_state(2, 0);
led_state(3, 0);
led_state(4, 0);
#if defined(USE_HOST_MODE)
// USB host
pyb_usb_host_init();
#elif defined(USE_DEVICE_MODE)
// USB device
if (reset_mode == 1) {
usb_device_mode_t usb_mode = USB_DEVICE_MODE_CDC_MSC;
if (pyb_config_usb_mode != MP_OBJ_NULL) {
if (strcmp(mp_obj_str_get_str(pyb_config_usb_mode), "CDC+HID") == 0) {
usb_mode = USB_DEVICE_MODE_CDC_HID;
}
}
pyb_usb_dev_init(usb_mode, usb_medium);
} else {
pyb_usb_dev_init(USB_DEVICE_MODE_CDC_MSC, usb_medium);
}
#endif
timer_init0();
#if MICROPY_HW_ENABLE_RNG
rng_init0();
#endif
i2c_init0();
spi_init0();
#if MICROPY_HW_HAS_MMA7660
// MMA accel: init and reset
accel_init();
#endif
#if MICROPY_HW_ENABLE_SERVO
// servo
servo_init();
#endif
#if MICROPY_HW_ENABLE_DAC
// DAC
dac_init();
#endif
// now that everything is initialised, run main script
if (reset_mode == 1 && pyexec_mode_kind == PYEXEC_MODE_FRIENDLY_REPL) {
vstr_t *vstr = vstr_new();
vstr_printf(vstr, "%d:/", root_device);
if (pyb_config_main == MP_OBJ_NULL) {
vstr_add_str(vstr, "main.py");
} else {
vstr_add_str(vstr, mp_obj_str_get_str(pyb_config_main));
}
FRESULT res = f_stat(vstr_str(vstr), NULL);
if (res == FR_OK) {
if (!pyexec_file(vstr_str(vstr))) {
flash_error(3);
}
}
vstr_free(vstr);
}
#if MICROPY_HW_ENABLE_CC3K
// wifi using the CC3000 driver
pyb_wlan_init();
pyb_wlan_start();
#endif
// enter REPL
// REPL mode can change, or it can request a soft reset
for (;;) {
if (pyexec_mode_kind == PYEXEC_MODE_RAW_REPL) {
if (pyexec_raw_repl() != 0) {
break;
}
} else {
if (pyexec_friendly_repl() != 0) {
break;
}
}
}
printf("PYB: sync filesystems\n");
storage_flush();
printf("PYB: soft reboot\n");
first_soft_reset = false;
goto soft_reset;
}
Reference in New Issue View Git Blame Copy Permalink