micropython/ports/esp32/machine_timer.c
Nicko van Someren c3c914f4dd esp8266,esp32: Implement high-res timers using new tick_hz argument.
machine.Timer now takes a new argument in its constructor (or init method):
tick_hz which specified the units for the period argument.  The period of
the timer in seconds is: period/tick_hz.

For backwards compatibility tick_hz defaults to 1000.  If the user wants to
specify the period (numerator) in microseconds then tick_hz can be set to
1000000.  The user can also specify a period of an arbitrary number of
cycles of an arbitrary frequency using these two arguments.

An additional freq argument has been added to allow frequencies to be
specified directly in Hertz.  This supports floating point values when
available.
2018-07-17 13:17:23 +10:00

222 lines
7.6 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* Development of the code in this file was sponsored by Microbric Pty Ltd
*
* The MIT License (MIT)
*
* Copyright (c) 2013-2015 Damien P. George
* Copyright (c) 2016 Paul Sokolovsky
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include <stdio.h>
#include "driver/timer.h"
#include "py/obj.h"
#include "py/runtime.h"
#include "modmachine.h"
#include "mphalport.h"
#define TIMER_INTR_SEL TIMER_INTR_LEVEL
#define TIMER_DIVIDER 8
// TIMER_BASE_CLK is normally 80MHz. TIMER_DIVIDER ought to divide this exactly
#define TIMER_SCALE (TIMER_BASE_CLK / TIMER_DIVIDER)
#define TIMER_FLAGS 0
typedef struct _machine_timer_obj_t {
mp_obj_base_t base;
mp_uint_t group;
mp_uint_t index;
mp_uint_t repeat;
// ESP32 timers are 64-bit
uint64_t period;
mp_obj_t callback;
intr_handle_t handle;
} machine_timer_obj_t;
const mp_obj_type_t machine_timer_type;
STATIC esp_err_t check_esp_err(esp_err_t code) {
if (code) {
mp_raise_OSError(code);
}
return code;
}
STATIC void machine_timer_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
machine_timer_obj_t *self = self_in;
timer_config_t config;
mp_printf(print, "Timer(%p; ", self);
timer_get_config(self->group, self->index, &config);
mp_printf(print, "alarm_en=%d, ", config.alarm_en);
mp_printf(print, "auto_reload=%d, ", config.auto_reload);
mp_printf(print, "counter_en=%d)", config.counter_en);
}
STATIC mp_obj_t machine_timer_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) {
mp_arg_check_num(n_args, n_kw, 1, 1, false);
machine_timer_obj_t *self = m_new_obj(machine_timer_obj_t);
self->base.type = &machine_timer_type;
self->group = (mp_obj_get_int(args[0]) >> 1) & 1;
self->index = mp_obj_get_int(args[0]) & 1;
return self;
}
STATIC void machine_timer_disable(machine_timer_obj_t *self) {
if (self->handle) {
timer_pause(self->group, self->index);
esp_intr_free(self->handle);
self->handle = NULL;
}
}
STATIC void machine_timer_isr(void *self_in) {
machine_timer_obj_t *self = self_in;
timg_dev_t *device = self->group ? &(TIMERG1) : &(TIMERG0);
device->hw_timer[self->index].update = 1;
if (self->index) {
device->int_clr_timers.t1 = 1;
} else {
device->int_clr_timers.t0 = 1;
}
device->hw_timer[self->index].config.alarm_en = self->repeat;
mp_sched_schedule(self->callback, self);
mp_hal_wake_main_task_from_isr();
}
STATIC void machine_timer_enable(machine_timer_obj_t *self) {
timer_config_t config;
config.alarm_en = TIMER_ALARM_EN;
config.auto_reload = self->repeat;
config.counter_dir = TIMER_COUNT_UP;
config.divider = TIMER_DIVIDER;
config.intr_type = TIMER_INTR_LEVEL;
config.counter_en = TIMER_PAUSE;
check_esp_err(timer_init(self->group, self->index, &config));
check_esp_err(timer_set_counter_value(self->group, self->index, 0x00000000));
check_esp_err(timer_set_alarm_value(self->group, self->index, self->period));
check_esp_err(timer_enable_intr(self->group, self->index));
check_esp_err(timer_isr_register(self->group, self->index, machine_timer_isr, (void*)self, TIMER_FLAGS, &self->handle));
check_esp_err(timer_start(self->group, self->index));
}
STATIC mp_obj_t machine_timer_init_helper(machine_timer_obj_t *self, mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
enum {
ARG_mode,
ARG_callback,
ARG_period,
ARG_tick_hz,
ARG_freq,
};
static const mp_arg_t allowed_args[] = {
{ MP_QSTR_mode, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} },
{ MP_QSTR_callback, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
{ MP_QSTR_period, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0xffffffff} },
{ MP_QSTR_tick_hz, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1000} },
#if MICROPY_PY_BUILTINS_FLOAT
{ MP_QSTR_freq, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
#else
{ MP_QSTR_freq, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0xffffffff} },
#endif
};
machine_timer_disable(self);
mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
#if MICROPY_PY_BUILTINS_FLOAT
if (args[ARG_freq].u_obj != mp_const_none) {
self->period = (uint64_t)(TIMER_SCALE / mp_obj_get_float(args[ARG_freq].u_obj));
}
#else
if (args[ARG_freq].u_int != 0xffffffff) {
self->period = TIMER_SCALE / ((uint64_t)args[ARG_freq].u_int);
}
#endif
else {
self->period = (((uint64_t)args[ARG_period].u_int) * TIMER_SCALE) / args[ARG_tick_hz].u_int;
}
self->repeat = args[ARG_mode].u_int;
self->callback = args[ARG_callback].u_obj;
self->handle = NULL;
machine_timer_enable(self);
return mp_const_none;
}
STATIC mp_obj_t machine_timer_deinit(mp_obj_t self_in) {
machine_timer_disable(self_in);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_timer_deinit_obj, machine_timer_deinit);
STATIC mp_obj_t machine_timer_init(mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) {
return machine_timer_init_helper(args[0], n_args - 1, args + 1, kw_args);
}
STATIC MP_DEFINE_CONST_FUN_OBJ_KW(machine_timer_init_obj, 1, machine_timer_init);
STATIC mp_obj_t machine_timer_value(mp_obj_t self_in) {
machine_timer_obj_t *self = self_in;
double result;
timer_get_counter_time_sec(self->group, self->index, &result);
return MP_OBJ_NEW_SMALL_INT((mp_uint_t)(result * 1000)); // value in ms
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_timer_value_obj, machine_timer_value);
STATIC const mp_rom_map_elem_t machine_timer_locals_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR___del__), MP_ROM_PTR(&machine_timer_deinit_obj) },
{ MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&machine_timer_deinit_obj) },
{ MP_ROM_QSTR(MP_QSTR_init), MP_ROM_PTR(&machine_timer_init_obj) },
{ MP_ROM_QSTR(MP_QSTR_value), MP_ROM_PTR(&machine_timer_value_obj) },
{ MP_ROM_QSTR(MP_QSTR_ONE_SHOT), MP_ROM_INT(false) },
{ MP_ROM_QSTR(MP_QSTR_PERIODIC), MP_ROM_INT(true) },
};
STATIC MP_DEFINE_CONST_DICT(machine_timer_locals_dict, machine_timer_locals_dict_table);
const mp_obj_type_t machine_timer_type = {
{ &mp_type_type },
.name = MP_QSTR_Timer,
.print = machine_timer_print,
.make_new = machine_timer_make_new,
.locals_dict = (mp_obj_t)&machine_timer_locals_dict,
};