mirror of
https://github.com/licsber/micropython.git
synced 2024-09-21 09:30:24 +08:00
51dabac096
This commit also introduces board directories and moves board specific config into the appropriate board directory. boards/stm32f4xx-af.csv was extracted from the STM32F4xx datasheet and hand-tweaked. make-pins.py takes boards/stm32f4xx-af.csv, boards/stm32f4xx-prefix.c, and boards/BOARD-NAME/pins.csv as input and generates the file build/pins_BOARD_NAME.c The generated pin file for PYBOARD4 looks like this: https://gist.github.com/dhylands/9063231 The generated pins file includes all of the supported alternate functions, and includes upsupported alternate functions as comments. See the commnet block at the top of stm/pin_map.c for details on how to use the pin mapper. I also went ahead and modified stm/gpio.c to use the pin mapper.
49 lines
1.6 KiB
C
49 lines
1.6 KiB
C
#define NETDUINO_PLUS_2
|
|
|
|
#define MICROPY_HW_BOARD_NAME "NetduinoPlus2"
|
|
|
|
#define MICROPY_HW_HAS_SWITCH (1)
|
|
|
|
// On the netuino, the sdcard appears to be wired up as a 1-bit
|
|
// SPI, so the driver needs to be converted to support that before
|
|
// we can turn this on.
|
|
#define MICROPY_HW_HAS_SDCARD (0)
|
|
#define MICROPY_HW_HAS_MMA7660 (0)
|
|
#define MICROPY_HW_HAS_LIS3DSH (0)
|
|
#define MICROPY_HW_HAS_LCD (0)
|
|
#define MICROPY_HW_HAS_WLAN (0)
|
|
#define MICROPY_HW_ENABLE_RNG (1)
|
|
#define MICROPY_HW_ENABLE_RTC (0)
|
|
#define MICROPY_HW_ENABLE_TIMER (1)
|
|
#define MICROPY_HW_ENABLE_SERVO (1)
|
|
#define MICROPY_HW_ENABLE_AUDIO (0)
|
|
|
|
#define USRSW_PORT (GPIOB)
|
|
#define USRSW_PIN (GPIO_Pin_11)
|
|
#define USRSW_PUPD (GPIO_PuPd_NOPULL)
|
|
#define USRSW_EXTI_PIN (EXTI_PinSource11)
|
|
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOB)
|
|
#define USRSW_EXTI_LINE (EXTI_Line11)
|
|
#define USRSW_EXTI_IRQN (EXTI15_10_IRQn)
|
|
#define USRSW_EXTI_EDGE (EXTI_Trigger_Rising)
|
|
|
|
/* LED */
|
|
#define PYB_LED1_PORT (GPIOA) // Blue LED
|
|
#define PYB_LED1_PIN (GPIO_Pin_10)
|
|
|
|
#define PYB_LED2_PORT (GPIOC) // White LED (aka Power)
|
|
#define PYB_LED2_PIN (GPIO_Pin_13)
|
|
|
|
#define PYB_LED3_PORT (GPIOA) // Same as Led(1)
|
|
#define PYB_LED3_PIN (GPIO_Pin_10)
|
|
|
|
#define PYB_LED4_PORT (GPIOC) // Same as Led(2)
|
|
#define PYB_LED4_PIN (GPIO_Pin_13)
|
|
|
|
#define PYB_OTYPE (GPIO_OType_PP)
|
|
|
|
#define PYB_LED_ON(port, pin) (port->BSRRL = pin)
|
|
#define PYB_LED_OFF(port, pin) (port->BSRRH = pin)
|
|
|
|
#define HSE_VALUE (25000000)
|