f3d1495fd3
Changes include: - Some mbedtls source files renamed or deprecated. - Our `mbedtls_config.h` files are renamed to `mbedtls_config_port.h`, so they don't clash with mbedtls's new default configuration file named `mbedtls_config.h`. - MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE is deprecated. - MBEDTLS_HAVE_TIME now requires an `mbedtls_ms_time` function to be defined but it's only used for TLSv1.3 (currently not enabled in MicroPython so there is a lazy implementation, i.e. seconds * 1000). - `tests/multi_net/ssl_data.py` is removed (due to deprecation of MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE), there are the existing `ssl_cert_rsa.py` and `sslcontext_server_client.py` tests which do very similar, simple SSL data transfer. - Tests now use an EC key by default (they are smaller and faster), and the RSA key has been regenerated due to the old PKCS encoding used by openssl rsa command, see https://stackoverflow.com/questions/40822328/openssl-rsa-key-pem-and-der-conversion-does-not-match (and `tests/README.md` has been updated accordingly). Signed-off-by: Carlos Gil <carlosgilglez@gmail.com> |
||
---|---|---|
.. | ||
boards | ||
hal | ||
lwip_inc | ||
mbedtls | ||
modules | ||
board_init.c | ||
cyw43_configport.h | ||
dma_manager.c | ||
dma_manager.h | ||
eth.c | ||
eth.h | ||
fatfs_port.c | ||
flash.c | ||
flash.h | ||
help.c | ||
irq.h | ||
led.c | ||
led.h | ||
machine_adc.c | ||
machine_bitstream.c | ||
machine_i2c.c | ||
machine_i2s.c | ||
machine_led.c | ||
machine_pin.c | ||
machine_pwm.c | ||
machine_rtc.c | ||
machine_sdcard.c | ||
machine_spi.c | ||
machine_uart.c | ||
machine_wdt.c | ||
main.c | ||
Makefile | ||
mimxrt_flash.c | ||
mimxrt_sdram.c | ||
modmachine.c | ||
modmachine.h | ||
modmimxrt.c | ||
modmimxrt.h | ||
modos.c | ||
modtime.c | ||
mpbthciport.c | ||
mpbthciport.h | ||
mpconfigport.h | ||
mphalport.c | ||
mphalport.h | ||
mpnetworkport.c | ||
mpnimbleport.c | ||
mpnimbleport.h | ||
network_lan.c | ||
pendsv.c | ||
pendsv.h | ||
pin.c | ||
pin.h | ||
qstrdefsport.h | ||
README.md | ||
sdcard.c | ||
sdcard.h | ||
sdio.c | ||
sdio.h | ||
systick.c | ||
systick.h | ||
ticks.c | ||
ticks.h | ||
tusb_config.h | ||
tusb_port.c |
Port of MicroPython to NXP iMX RT 10xx
Currently supports Teensy 4.0, Teensy 4.1, and the MIMXRT1010_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK, MIMXRT1060_EVK and MIMXRT1064_EVK boards.
Features:
- REPL over USB VCP
- machine.ADC
- machine.I2C
- machine.LED
- machine.Pin
- machine.PWM
- machine.RTC
- machine.SDCard
- machine.SPI
- machine.Signal
- machine.SoftI2C
- machine.SoftSPI
- machine.Timer
- machine.UART
- LFS2 file system at the internal Flash
- SDCard support (not on MIMXRT1010_EVK)
- Ethernet (not on Teensy 4.0 and MIMXRT1010_EVK)
Known issues:
TODO:
- More peripherals (Counter, I2S, CAN, etc)
- More Python options
Build Instructions
Before building the firmware for a given board the MicroPython cross-compiler must be built; it will be used to pre-compile some of the built-in scripts to bytecode. The cross-compiler is built and run on the host machine, using:
$ make -C mpy-cross
This command should be executed from the root directory of this repository. All other commands below should be executed from the ports/mimxrt/ directory.
An ARM compiler is required for the build, along with the associated binary
utilities. The default compiler is arm-none-eabi-gcc
, which is available for
Arch Linux via the package arm-none-eabi-gcc
, for Ubuntu via instructions
here, or
see here for the main GCC ARM
Embedded page. The compiler can be changed using the CROSS_COMPILE
variable
when invoking make
.
In addition newlib is required which is available for Arch Linux via the
package arm-none-eabi-newlib
, for Ubuntu/Debian install package libnewlib-arm-none-eabi
Next, the board to build must be selected. Any of the board names of the
subdirectories in the boards/
directory is a valid board. The board name
must be passed as the argument to BOARD=
when invoking make
.
All boards require certain submodules to be obtained before they can be built.
The correct set of submodules can be initialised using (with SEEED_ARCH_MIX
as an example of the selected board):
$ make BOARD=SEEED_ARCH_MIX submodules
Then to build the board's firmware run:
$ make BOARD=SEEED_ARCH_MIX
The above command should produce binary images in the build-SEEED_ARCH_MIX/
subdirectory (or the equivalent directory for the board specified).
Flashing
Deploy the firmware following the instructions here https://docs.micropython.org/en/latest/mimxrt/tutorial/intro.html#deploying-the-firmware