mirror of
https://github.com/licsber/micropython.git
synced 2024-09-21 17:40:24 +08:00
87f97e490c
- Configures `PLL2->PFD0` with **198MHz** as base clock of
`USDHCx` peripheral.
- Adds guards for SDCard related files via `MICROPY_PY_MACHINE_SDCARD`
- Adds creation of pin defines for SDCard to make-pins.py
- Adds new configuration option for SDCard peripheral pinout
to mpconfigport.h
- Adds interrupt handling support instead of polling
- Adds support for `ADMA2` powered data transfer
- Configures SDCard to run in HS (high-speed mode) with **50MHz** only!
SDCard support is optional and requires `USDHC` peripheral.
Thus this driver is not available on `MIMXRT1010_EVK`.
SDCard support is enabled by setting `MICROPY_PY_MACHINE_SDCARD = 1`
in mpconfigboard.mk.
Signed-off-by: Philipp Ebensberger
31 lines
865 B
Makefile
31 lines
865 B
Makefile
MCU_SERIES = MIMXRT1021
|
|
MCU_VARIANT = MIMXRT1021DAG5A
|
|
|
|
MICROPY_FLOAT_IMPL = double
|
|
MICROPY_PY_MACHINE_SDCARD = 1
|
|
|
|
JLINK_PATH ?= /media/RT1020-EVK/
|
|
JLINK_COMMANDER_SCRIPT = $(BUILD)/script.jlink
|
|
|
|
|
|
ifdef JLINK_IP
|
|
JLINK_CONNECTION_SETTINGS = -IP $(JLINK_IP)
|
|
else
|
|
JLINK_CONNECTION_SETTINGS =
|
|
endif
|
|
|
|
SRC_C += \
|
|
hal/flexspi_nor_flash.c
|
|
|
|
deploy_jlink: $(BUILD)/firmware.hex
|
|
$(ECHO) "ExitOnError 1" > $(JLINK_COMMANDER_SCRIPT)
|
|
$(ECHO) "speed auto" >> $(JLINK_COMMANDER_SCRIPT)
|
|
$(ECHO) "r" >> $(JLINK_COMMANDER_SCRIPT)
|
|
$(ECHO) "st" >> $(JLINK_COMMANDER_SCRIPT)
|
|
$(ECHO) "loadfile \"$(realpath $(BUILD)/firmware.hex)\"" >> $(JLINK_COMMANDER_SCRIPT)
|
|
$(ECHO) "qc" >> $(JLINK_COMMANDER_SCRIPT)
|
|
$(JLINK_PATH)JLinkExe -device $(MCU_VARIANT) -if SWD $(JLINK_CONNECTION_SETTINGS) -CommanderScript $(JLINK_COMMANDER_SCRIPT)
|
|
|
|
deploy: $(BUILD)/firmware.bin
|
|
cp $< $(JLINK_PATH)
|