micropython/ports/stm32/boards/stm32f413xh.ld
Damien George 04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00

32 lines
1.4 KiB
Plaintext

/*
GNU linker script for STM32F413xh (1.5MB flash, 320kB RAM)
*/
/* Specify the memory areas */
/* FLASH_FS2 is placed before FLASH_TEXT to support 1MB and 1.5MB FLASH with common code in flashbdev.c */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1536K /* entire flash */
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */
FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 176K /* sectors 1,2,3 are 16K, 4 is 64K, 5 is 128K (64K used) for filesystem */
FLASH_FS2 (rx) : ORIGIN = 0x08040000, LENGTH = 128K /* sector 6 is 128K (64K used) for filesystem, Total filesystem 240K */
FLASH_TEXT (rx) : ORIGIN = 0x08060000, LENGTH = 1152K /* sectors 7,8,9,10,11,12,13,14,15 are 128K*/
SRAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 64K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K
}
/* produce a link error if there is not this amount of RAM for these sections */
_minimum_stack_size = 2K;
_minimum_heap_size = 16K;
/* Define the stack. The stack is full descending so begins just above last byte
of RAM. Note that EABI requires the stack to be 8-byte aligned for a call. */
_estack = ORIGIN(RAM) + LENGTH(RAM) - _estack_reserve;
_sstack = _estack - 16K; /* tunable */
/* RAM extents for the garbage collector */
_ram_start = ORIGIN(RAM);
_ram_end = ORIGIN(RAM) + LENGTH(RAM);
_heap_start = _ebss; /* heap starts just after statically allocated memory */
_heap_end = _sstack;