micropython/docs/library/machine.rst

172 lines
5.6 KiB
ReStructuredText

:mod:`machine` --- functions related to the hardware
====================================================
.. module:: machine
:synopsis: functions related to the hardware
The ``machine`` module contains specific functions related to the hardware
on a particular board. Most functions in this module allow to achieve direct
and unrestricted access to and control of hardware blocks on a system
(like CPU, timers, buses, etc.). Used incorrectly, this can lead to
malfunction, lockups, crashes of your board, and in extreme cases, hardware
damage.
.. _machine_callbacks:
A note of callbacks used by functions and class methods of :mod:`machine` module:
all these callbacks should be considered as executing in an interrupt context.
This is true for both physical devices with IDs >= 0 and "virtual" devices
with negative IDs like -1 (these "virtual" devices are still thin shims on
top of real hardware and real hardware interrupts). See :ref:`isr_rules`.
Reset related functions
-----------------------
.. function:: reset()
Resets the device in a manner similar to pushing the external RESET
button.
.. function:: reset_cause()
Get the reset cause. See :ref:`constants <machine_constants>` for the possible return values.
Interrupt related functions
---------------------------
.. function:: disable_irq()
Disable interrupt requests.
Returns the previous IRQ state which should be considered an opaque value.
This return value should be passed to the `enable_irq()` function to restore
interrupts to their original state, before `disable_irq()` was called.
.. function:: enable_irq(state)
Re-enable interrupt requests.
The *state* parameter should be the value that was returned from the most
recent call to the `disable_irq()` function.
Power related functions
-----------------------
.. function:: freq()
Returns CPU frequency in hertz.
.. function:: idle()
Gates the clock to the CPU, useful to reduce power consumption at any time during
short or long periods. Peripherals continue working and execution resumes as soon
as any interrupt is triggered (on many ports this includes system timer
interrupt occurring at regular intervals on the order of millisecond).
.. function:: sleep()
.. note:: This function is deprecated, use `lightsleep()` instead with no arguments.
.. function:: lightsleep([time_ms])
deepsleep([time_ms])
Stops execution in an attempt to enter a low power state.
If *time_ms* is specified then this will be the maximum time in milliseconds that
the sleep will last for. Otherwise the sleep can last indefinitely.
With or without a timout, execution may resume at any time if there are events
that require processing. Such events, or wake sources, should be configured before
sleeping, like `Pin` change or `RTC` timeout.
The precise behaviour and power-saving capabilities of lightsleep and deepsleep is
highly dependent on the underlying hardware, but the general properties are:
* A lightsleep has full RAM and state retention. Upon wake execution is resumed
from the point where the sleep was requested, with all subsystems operational.
* A deepsleep may not retain RAM or any other state of the system (for example
peripherals or network interfaces). Upon wake execution is resumed from the main
script, similar to a hard or power-on reset. The `reset_cause()` function will
return `machine.DEEPSLEEP` and this can be used to distinguish a deepsleep wake
from other resets.
.. function:: wake_reason()
Get the wake reason. See :ref:`constants <machine_constants>` for the possible return values.
Availability: ESP32, WiPy.
Miscellaneous functions
-----------------------
.. function:: unique_id()
Returns a byte string with a unique identifier of a board/SoC. It will vary
from a board/SoC instance to another, if underlying hardware allows. Length
varies by hardware (so use substring of a full value if you expect a short
ID). In some MicroPython ports, ID corresponds to the network MAC address.
.. function:: time_pulse_us(pin, pulse_level, timeout_us=1000000)
Time a pulse on the given *pin*, and return the duration of the pulse in
microseconds. The *pulse_level* argument should be 0 to time a low pulse
or 1 to time a high pulse.
If the current input value of the pin is different to *pulse_level*,
the function first (*) waits until the pin input becomes equal to *pulse_level*,
then (**) times the duration that the pin is equal to *pulse_level*.
If the pin is already equal to *pulse_level* then timing starts straight away.
The function will return -2 if there was timeout waiting for condition marked
(*) above, and -1 if there was timeout during the main measurement, marked (**)
above. The timeout is the same for both cases and given by *timeout_us* (which
is in microseconds).
.. function:: rng()
Return a 24-bit software generated random number.
Availability: WiPy.
.. _machine_constants:
Constants
---------
.. data:: machine.IDLE
machine.SLEEP
machine.DEEPSLEEP
IRQ wake values.
.. data:: machine.PWRON_RESET
machine.HARD_RESET
machine.WDT_RESET
machine.DEEPSLEEP_RESET
machine.SOFT_RESET
Reset causes.
.. data:: machine.WLAN_WAKE
machine.PIN_WAKE
machine.RTC_WAKE
Wake-up reasons.
Classes
-------
.. toctree::
:maxdepth: 1
machine.Pin.rst
machine.Signal.rst
machine.ADC.rst
machine.UART.rst
machine.SPI.rst
machine.I2C.rst
machine.RTC.rst
machine.Timer.rst
machine.WDT.rst
machine.SD.rst
machine.SDCard.rst