micropython/drivers/cc3000/inc/nvmem.h

249 lines
9.4 KiB
C

/*****************************************************************************
*
* nvmem.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_NVRAM_H__
#define __CC3000_NVRAM_H__
#include "cc3000_common.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
//*****************************************************************************
//
//! \addtogroup nvmem_api
//! @{
//
//*****************************************************************************
/****************************************************************************
**
** Definitions for File IDs
**
****************************************************************************/
/* NVMEM file ID - system files*/
#define NVMEM_NVS_FILEID (0)
#define NVMEM_NVS_SHADOW_FILEID (1)
#define NVMEM_WLAN_CONFIG_FILEID (2)
#define NVMEM_WLAN_CONFIG_SHADOW_FILEID (3)
#define NVMEM_WLAN_DRIVER_SP_FILEID (4)
#define NVMEM_WLAN_FW_SP_FILEID (5)
#define NVMEM_MAC_FILEID (6)
#define NVMEM_FRONTEND_VARS_FILEID (7)
#define NVMEM_IP_CONFIG_FILEID (8)
#define NVMEM_IP_CONFIG_SHADOW_FILEID (9)
#define NVMEM_BOOTLOADER_SP_FILEID (10)
#define NVMEM_RM_FILEID (11)
/* NVMEM file ID - user files*/
#define NVMEM_AES128_KEY_FILEID (12)
#define NVMEM_SHARED_MEM_FILEID (13)
/* max entry in order to invalid nvmem */
#define NVMEM_MAX_ENTRY (16)
//*****************************************************************************
//
//! nvmem_read
//!
//! @param ulFileId nvmem file id:\n
//! NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID,
//! NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID,
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//! NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID,
//! NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID,
//! NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID,
//! and user files 12-15.
//! @param ulLength number of bytes to read
//! @param ulOffset ulOffset in file from where to read
//! @param buff output buffer pointer
//!
//! @return on success 0, error otherwise.
//!
//! @brief Reads data from the file referred by the ulFileId parameter.
//! Reads data from file ulOffset till length. Err if the file can't
//! be used, is invalid, or if the read is out of bounds.
//!
//*****************************************************************************
extern INT32 nvmem_read(UINT32 file_id, UINT32 length, UINT32 offset, UINT8 *buff);
//*****************************************************************************
//
//! nvmem_write
//!
//! @param ulFileId nvmem file id:\n
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//! NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID,
//! and user files 12-15.
//! @param ulLength number of bytes to write
//! @param ulEntryOffset offset in file to start write operation from
//! @param buff data to write
//!
//! @return on success 0, error otherwise.
//!
//! @brief Write data to nvmem.
//! writes data to file referred by the ulFileId parameter.
//! Writes data to file ulOffset till ulLength.The file id will be
//! marked invalid till the write is done. The file entry doesn't
//! need to be valid - only allocated.
//!
//*****************************************************************************
extern INT32 nvmem_write(UINT32 ulFileId, UINT32 ulLength, UINT32 ulEntryOffset, UINT8 *buff);
//*****************************************************************************
//
//! nvmem_set_mac_address
//!
//! @param mac mac address to be set
//!
//! @return on success 0, error otherwise.
//!
//! @brief Write MAC address to EEPROM.
//! mac address as appears over the air (OUI first)
//!
//*****************************************************************************
extern UINT8 nvmem_set_mac_address(UINT8 *mac);
//*****************************************************************************
//
//! nvmem_get_mac_address
//!
//! @param[out] mac mac address
//!
//! @return on success 0, error otherwise.
//!
//! @brief Read MAC address from EEPROM.
//! mac address as appears over the air (OUI first)
//!
//*****************************************************************************
extern UINT8 nvmem_get_mac_address(UINT8 *mac);
//*****************************************************************************
//
//! nvmem_write_patch
//!
//! @param ulFileId nvmem file id:\n
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//! @param spLength number of bytes to write
//! @param spData SP data to write
//!
//! @return on success 0, error otherwise.
//!
//! @brief program a patch to a specific file ID.
//! The SP data is assumed to be organized in 2-dimensional.
//! Each line is SP_PORTION_SIZE bytes long. Actual programming is
//! applied in SP_PORTION_SIZE bytes portions.
//!
//*****************************************************************************
extern UINT8 nvmem_write_patch(UINT32 ulFileId, UINT32 spLength, const UINT8 *spData);
//*****************************************************************************
//
//! nvmem_read_sp_version
//!
//! @param[out] patchVer first number indicates package ID and the second
//! number indicates package build number
//!
//! @return on success 0, error otherwise.
//!
//! @brief Read patch version. read package version (WiFi FW patch,
//! driver-supplicant-NS patch, bootloader patch)
//!
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern UINT8 nvmem_read_sp_version(UINT8* patchVer);
#endif
//*****************************************************************************
//
//! nvmem_create_entry
//!
//! @param ulFileId nvmem file Id:\n
//! * NVMEM_AES128_KEY_FILEID: 12
//! * NVMEM_SHARED_MEM_FILEID: 13
//! * and fileIDs 14 and 15
//! @param ulNewLen entry ulLength
//!
//! @return on success 0, error otherwise.
//!
//! @brief Create new file entry and allocate space on the NVMEM.
//! Applies only to user files.
//! Modify the size of file.
//! If the entry is unallocated - allocate it to size
//! ulNewLen (marked invalid).
//! If it is allocated then deallocate it first.
//! To just mark the file as invalid without resizing -
//! set ulNewLen=0.
//!
//*****************************************************************************
extern INT32 nvmem_create_entry(UINT32 file_id, UINT32 newlen);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __CC3000_NVRAM_H__