mirror of
https://github.com/licsber/micropython.git
synced 2024-09-21 01:20:23 +08:00
7afbc49863
Add CONFIG_NET_DHCPV4, which, after https://github.com/zephyrproject-rtos/zephyr/pull/5750 works as follows: static addresses are configured after boot, and DHCP requests are sent at the same time. If valid DHCP reply is received, it overrides static addresses. This setup works out of the box for both direct connection to a workstation (DHCP server usually is not available) and for connection to a router (DHCP is available and required).
67 lines
1.5 KiB
Plaintext
67 lines
1.5 KiB
Plaintext
CONFIG_BUILD_OUTPUT_BIN=y
|
|
CONFIG_REBOOT=y
|
|
|
|
CONFIG_STDOUT_CONSOLE=y
|
|
CONFIG_CONSOLE_HANDLER=y
|
|
CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS=y
|
|
|
|
CONFIG_CONSOLE_PULL=y
|
|
CONFIG_CONSOLE_GETCHAR=y
|
|
CONFIG_CONSOLE_GETCHAR_BUFSIZE=128
|
|
CONFIG_CONSOLE_PUTCHAR_BUFSIZE=128
|
|
|
|
CONFIG_NEWLIB_LIBC=y
|
|
CONFIG_FLOAT=y
|
|
CONFIG_MAIN_STACK_SIZE=4736
|
|
|
|
# Enable sensor subsystem (doesn't add code if not used).
|
|
# Specific sensors should be enabled per-board.
|
|
CONFIG_SENSOR=y
|
|
|
|
# Networking config
|
|
CONFIG_NETWORKING=y
|
|
CONFIG_NET_IPV4=y
|
|
CONFIG_NET_IPV6=y
|
|
CONFIG_NET_UDP=y
|
|
CONFIG_NET_TCP=y
|
|
CONFIG_NET_SOCKETS=y
|
|
CONFIG_TEST_RANDOM_GENERATOR=y
|
|
CONFIG_NET_NBUF_RX_COUNT=5
|
|
|
|
CONFIG_NET_APP_SETTINGS=y
|
|
CONFIG_NET_APP_INIT_TIMEOUT=3
|
|
CONFIG_NET_APP_NEED_IPV6=y
|
|
CONFIG_NET_APP_NEED_IPV4=y
|
|
|
|
# DNS
|
|
CONFIG_DNS_RESOLVER=y
|
|
CONFIG_DNS_RESOLVER_ADDITIONAL_QUERIES=2
|
|
CONFIG_DNS_SERVER_IP_ADDRESSES=y
|
|
|
|
# Static IP addresses
|
|
CONFIG_NET_APP_MY_IPV6_ADDR="2001:db8::1"
|
|
CONFIG_NET_APP_MY_IPV4_ADDR="192.0.2.1"
|
|
CONFIG_NET_APP_MY_IPV4_GW="192.0.2.2"
|
|
CONFIG_DNS_SERVER1="192.0.2.2"
|
|
|
|
# DHCP configuration. Until DHCP address is assigned,
|
|
# static configuration above is used instead.
|
|
CONFIG_NET_DHCPV4=y
|
|
|
|
# Diagnostics and debugging
|
|
|
|
# Required for zephyr.stack_analyze()
|
|
CONFIG_INIT_STACKS=y
|
|
|
|
# Required for usocket.pkt_get_info()
|
|
CONFIG_NET_BUF_POOL_USAGE=y
|
|
|
|
# Required for usocket.shell_*()
|
|
#CONFIG_NET_SHELL=y
|
|
|
|
# Uncomment to enable "INFO" level net_buf logging
|
|
#CONFIG_NET_LOG=y
|
|
#CONFIG_NET_DEBUG_NET_BUF=y
|
|
# Change to 4 for "DEBUG" level
|
|
#CONFIG_SYS_LOG_NET_LEVEL=3
|