micropython/ports/samd/boards/ADAFRUIT_ITSYBITSY_M0_EXPRESS
robert-hh 20e7313453 samd/clock_config: Add HW_DFLL_USB_SYNC and HW_MCU_OSC32KULP extensions.
Two new compile flags are:

MICROPY_HW_DFLL_USB_SYNC: Effective only if DFLL48 does not run from the
crystal.  It will synchronize the DFLL48M clock with the USB's SOF pulse.
If no USB is connected, it will fall back to open loop mode.  The DFLL48M
clock is then pretty precise, but with a higher clock jitter at SAMD51
devices.

MICROPY_HW_MCU_OSC32KULP: Effective only if the devics uses a crystal as
clock source.  Run the MCU clock from the ULP 32kHz oszillator instead of
the crystal.  This flag was added to cater for a interference problem of
the crystal and Neopixel/Debug pins at Adafruit FEATHER Mx boards, which
causes the board to crash.  Drawback: ticks_ms() and time.time() vs. than
ticks_us() and the peripherals like PWM run at not synchronous clocks.
2022-10-06 23:03:08 +11:00
..
board.json samd/boards: Add ADAFRUIT_FEATHER_M4_EXPRESS and _ITSYBITSY_M0_EXPRESS. 2022-10-06 22:32:01 +11:00
mpconfigboard.h samd/clock_config: Add HW_DFLL_USB_SYNC and HW_MCU_OSC32KULP extensions. 2022-10-06 23:03:08 +11:00
mpconfigboard.mk samd/boards: Add ADAFRUIT_FEATHER_M4_EXPRESS and _ITSYBITSY_M0_EXPRESS. 2022-10-06 22:32:01 +11:00
pins.csv samd/boards: Add missing/lost board config and pin definitions. 2022-10-06 22:58:09 +11:00