micropython/drivers/wiznet5k/ethernet/socket.h

473 lines
27 KiB
C

//*****************************************************************************
//
//! \file socket.h
//! \brief SOCKET APIs Header file.
//! \details SOCKET APIs like as berkeley socket api.
//! \version 1.0.2
//! \date 2013/10/21
//! \par Revision history
//! <2014/05/01> V1.0.2. Refer to M20140501
//! 1. Modify the comment : SO_REMAINED -> PACK_REMAINED
//! 2. Add the comment as zero byte udp data reception in getsockopt().
//! <2013/10/21> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2013, WIZnet Co., LTD.
//! All rights reserved.
//!
//! Redistribution and use in source and binary forms, with or without
//! modification, are permitted provided that the following conditions
//! are met:
//!
//! * Redistributions of source code must retain the above copyright
//! notice, this list of conditions and the following disclaimer.
//! * Redistributions in binary form must reproduce the above copyright
//! notice, this list of conditions and the following disclaimer in the
//! documentation and/or other materials provided with the distribution.
//! * Neither the name of the <ORGANIZATION> nor the names of its
//! contributors may be used to endorse or promote products derived
//! from this software without specific prior written permission.
//!
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
//! THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
/**
* @defgroup WIZnet_socket_APIs 1. WIZnet socket APIs
* @brief WIZnet socket APIs are based on Berkeley socket APIs, thus it has much similar name and interface.
* But there is a little bit of difference.
* @details
* <b> Comparison between WIZnet and Berkeley SOCKET APIs </b>
* <table>
* <tr> <td><b>API</b></td> <td><b>WIZnet</b></td> <td><b>Berkeley</b></td> </tr>
* <tr> <td>socket()</td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>bind()</b></td> <td>X</td> <td>O</td> </tr>
* <tr> <td><b>listen()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>connect()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>accept()</b></td> <td>X</td> <td>O</td> </tr>
* <tr> <td><b>recv()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>send()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>recvfrom()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>sendto()</b></td> <td>O</td> <td>O</td> </tr>
* <tr> <td><b>closesocket()</b></td> <td>O<br>close() & disconnect()</td> <td>O</td> </tr>
* </table>
* There are @b bind() and @b accept() functions in @b Berkeley SOCKET API but,
* not in @b WIZnet SOCKET API. Because socket() of WIZnet is not only creating a SOCKET but also binding a local port number,
* and listen() of WIZnet is not only listening to connection request from client but also accepting the connection request. \n
* When you program "TCP SERVER" with Berkeley SOCKET API, you can use only one listen port.
* When the listen SOCKET accepts a connection request from a client, it keeps listening.
* After accepting the connection request, a new SOCKET is created and the new SOCKET is used in communication with the client. \n
* Following figure shows network flow diagram by Berkeley SOCKET API.
* @image html Berkeley_SOCKET.jpg "<Berkeley SOCKET API>"
* But, When you program "TCP SERVER" with WIZnet SOCKET API, you can use as many as 8 listen SOCKET with same port number. \n
* Because there's no accept() in WIZnet SOCKET APIs, when the listen SOCKET accepts a connection request from a client,
* it is changed in order to communicate with the client.
* And the changed SOCKET is not listening any more and is dedicated for communicating with the client. \n
* If there're many listen SOCKET with same listen port number and a client requests a connection,
* the SOCKET which has the smallest SOCKET number accepts the request and is changed as communication SOCKET. \n
* Following figure shows network flow diagram by WIZnet SOCKET API.
* @image html WIZnet_SOCKET.jpg "<WIZnet SOCKET API>"
*/
#ifndef _WIZCHIP_SOCKET_H_
#define _WIZCHIP_SOCKET_H_
// use this macro for exported names to avoid name clashes
#define WIZCHIP_EXPORT(name) wizchip_ ## name
#include "wizchip_conf.h"
#define SOCKET uint8_t ///< SOCKET type define for legacy driver
#define SOCK_OK 1 ///< Result is OK about socket process.
#define SOCK_BUSY 0 ///< Socket is busy on processing the operation. Valid only Non-block IO Mode.
#define SOCK_FATAL -1000 ///< Result is fatal error about socket process.
#define SOCK_ERROR 0
#define SOCKERR_SOCKNUM (SOCK_ERROR - 1) ///< Invalid socket number
#define SOCKERR_SOCKOPT (SOCK_ERROR - 2) ///< Invalid socket option
#define SOCKERR_SOCKINIT (SOCK_ERROR - 3) ///< Socket is not initialized
#define SOCKERR_SOCKCLOSED (SOCK_ERROR - 4) ///< Socket unexpectedly closed.
#define SOCKERR_SOCKMODE (SOCK_ERROR - 5) ///< Invalid socket mode for socket operation.
#define SOCKERR_SOCKFLAG (SOCK_ERROR - 6) ///< Invalid socket flag
#define SOCKERR_SOCKSTATUS (SOCK_ERROR - 7) ///< Invalid socket status for socket operation.
#define SOCKERR_ARG (SOCK_ERROR - 10) ///< Invalid argument.
#define SOCKERR_PORTZERO (SOCK_ERROR - 11) ///< Port number is zero
#define SOCKERR_IPINVALID (SOCK_ERROR - 12) ///< Invalid IP address
#define SOCKERR_TIMEOUT (SOCK_ERROR - 13) ///< Timeout occurred
#define SOCKERR_DATALEN (SOCK_ERROR - 14) ///< Data length is zero or greater than buffer max size.
#define SOCKERR_BUFFER (SOCK_ERROR - 15) ///< Socket buffer is not enough for data communication.
#define SOCKFATAL_PACKLEN (SOCK_FATAL - 1) ///< Invalid packet length. Fatal Error.
/*
* SOCKET FLAG
*/
#define SF_ETHER_OWN (Sn_MR_MFEN) ///< In \ref Sn_MR_MACRAW, Receive only the packet as broadcast, multicast and own packet
#define SF_IGMP_VER2 (Sn_MR_MC) ///< In \ref Sn_MR_UDP with \ref SF_MULTI_ENABLE, Select IGMP version 2.
#define SF_TCP_NODELAY (Sn_MR_ND) ///< In \ref Sn_MR_TCP, Use to nodelayed ack.
#define SF_MULTI_ENABLE (Sn_MR_MULTI) ///< In \ref Sn_MR_UDP, Enable multicast mode.
#if _WIZCHIP_ == 5500
#define SF_BROAD_BLOCK (Sn_MR_BCASTB) ///< In \ref Sn_MR_UDP or \ref Sn_MR_MACRAW, Block broadcast packet. Valid only in W5500
#define SF_MULTI_BLOCK (Sn_MR_MMB) ///< In \ref Sn_MR_MACRAW, Block multicast packet. Valid only in W5500
#define SF_IPv6_BLOCK (Sn_MR_MIP6B) ///< In \ref Sn_MR_MACRAW, Block IPv6 packet. Valid only in W5500
#define SF_UNI_BLOCK (Sn_MR_UCASTB) ///< In \ref Sn_MR_UDP with \ref SF_MULTI_ENABLE. Valid only in W5500
#endif
#define SF_IO_NONBLOCK 0x01 ///< Socket nonblock io mode. It used parameter in \ref socket().
/*
* UDP & MACRAW Packet Infomation
*/
#define PACK_FIRST 0x80 ///< In Non-TCP packet, It indicates to start receiving a packet.
#define PACK_REMAINED 0x01 ///< In Non-TCP packet, It indicates to remain a packet to be received.
#define PACK_COMPLETED 0x00 ///< In Non-TCP packet, It indicates to complete to receive a packet.
// resets all global state associated with the socket interface
void WIZCHIP_EXPORT(socket_reset)(void);
/**
* @ingroup WIZnet_socket_APIs
* @brief Open a socket.
* @details Initializes the socket with 'sn' passed as parameter and open.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param protocol Protocol type to operate such as TCP, UDP and MACRAW.
* @param port Port number to be bined.
* @param flag Socket flags as \ref SF_ETHER_OWN, \ref SF_IGMP_VER2, \ref SF_TCP_NODELAY, \ref SF_MULTI_ENABLE, \ref SF_IO_NONBLOCK and so on.\n
* Valid flags only in W5500 : @ref SF_BROAD_BLOCK, @ref SF_MULTI_BLOCK, @ref SF_IPv6_BLOCK, and @ref SF_UNI_BLOCK.
* @sa Sn_MR
*
* @return @b Success : The socket number @b 'sn' passed as parameter\n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number\n
* @ref SOCKERR_SOCKMODE - Not support socket mode as TCP, UDP, and so on. \n
* @ref SOCKERR_SOCKFLAG - Invaild socket flag.
*/
int8_t WIZCHIP_EXPORT(socket)(uint8_t sn, uint8_t protocol, uint16_t port, uint8_t flag);
/**
* @ingroup WIZnet_socket_APIs
* @brief Close a socket.
* @details It closes the socket with @b'sn' passed as parameter.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
*
* @return @b Success : @ref SOCK_OK \n
* @b Fail : @ref SOCKERR_SOCKNUM - Invalid socket number
*/
int8_t WIZCHIP_EXPORT(close)(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Listen to a connection request from a client.
* @details It is listening to a connection request from a client.
* If connection request is accepted successfully, the connection is established. Socket sn is used in passive(server) mode.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKINIT - Socket is not initialized \n
* @ref SOCKERR_SOCKCLOSED - Socket closed unexpectedly.
*/
int8_t WIZCHIP_EXPORT(listen)(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Try to connect a server.
* @details It requests connection to the server with destination IP address and port number passed as parameter.\n
* @note It is valid only in TCP client mode.
* In block io mode, it does not return until connection is completed.
* In Non-block io mode, it return @ref SOCK_BUSY immediately.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* @param port Destination port number.
*
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number\n
* @ref SOCKERR_SOCKMODE - Invalid socket mode\n
* @ref SOCKERR_SOCKINIT - Socket is not initialized\n
* @ref SOCKERR_IPINVALID - Wrong server IP address\n
* @ref SOCKERR_PORTZERO - Server port zero\n
* @ref SOCKERR_TIMEOUT - Timeout occurred during request connection\n
* @ref SOCK_BUSY - In non-block io mode, it returned immediately\n
*/
int8_t WIZCHIP_EXPORT(connect)(uint8_t sn, uint8_t * addr, uint16_t port);
/**
* @ingroup WIZnet_socket_APIs
* @brief Try to disconnect a connection socket.
* @details It sends request message to disconnect the TCP socket 'sn' passed as parameter to the server or client.
* @note It is valid only in TCP server or client mode. \n
* In block io mode, it does not return until disconnection is completed. \n
* In Non-block io mode, it return @ref SOCK_BUSY immediately. \n
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @return @b Success : @ref SOCK_OK \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCK_BUSY - Socket is busy.
*/
int8_t WIZCHIP_EXPORT(disconnect)(uint8_t sn);
/**
* @ingroup WIZnet_socket_APIs
* @brief Send data to the connected peer in TCP socket.
* @details It is used to send outgoing data to the connected socket.
* @note It is valid only in TCP server or client mode. It can't send data greater than socket buffer size. \n
* In block io mode, It doesn't return until data send is completed - socket buffer size is greater than data. \n
* In non-block io mode, It return @ref SOCK_BUSY immediately when socket buffer is not enough. \n
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer containing data to be sent.
* @param len The byte length of data in buf.
* @return @b Success : The sent data size \n
* @b Fail : \n @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(send)(uint8_t sn, uint8_t * buf, uint16_t len);
/**
* @ingroup WIZnet_socket_APIs
* @brief Receive data from the connected peer.
* @details It is used to read incoming data from the connected socket.\n
* It waits for data as much as the application wants to receive.
* @note It is valid only in TCP server or client mode. It can't receive data greater than socket buffer size. \n
* In block io mode, it doesn't return until data reception is completed - data is filled as <I>len</I> in socket buffer. \n
* In non-block io mode, it return @ref SOCK_BUSY immediately when <I>len</I> is greater than data size in socket buffer. \n
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to read incoming data.
* @param len The max data length of data in buf.
* @return @b Success : The real received data size \n
* @b Fail :\n
* @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(recv)(uint8_t sn, uint8_t * buf, uint16_t len);
/**
* @ingroup WIZnet_socket_APIs
* @brief Sends datagram to the peer with destination IP address and port number passed as parameter.
* @details It sends datagram of UDP or MACRAW to the peer with destination IP address and port number passed as parameter.\n
* Even if the connectionless socket has been previously connected to a specific address,
* the address and port number parameters override the destination address for that particular datagram only.
* @note In block io mode, It doesn't return until data send is completed - socket buffer size is greater than <I>len</I>.
* In non-block io mode, It return @ref SOCK_BUSY immediately when socket buffer is not enough.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to send outgoing data.
* @param len The byte length of data in buf.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* @param port Destination port number.
*
* @return @b Success : The sent data size \n
* @b Fail :\n @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKSTATUS - Invalid socket status for socket operation \n
* @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCKERR_IPINVALID - Wrong server IP address\n
* @ref SOCKERR_PORTZERO - Server port zero\n
* @ref SOCKERR_SOCKCLOSED - Socket unexpectedly closed \n
* @ref SOCKERR_TIMEOUT - Timeout occurred \n
* @ref SOCK_BUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(sendto)(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t port);
/**
* @ingroup WIZnet_socket_APIs
* @brief Receive datagram of UDP or MACRAW
* @details This function is an application I/F function which is used to receive the data in other then TCP mode. \n
* This function is used to receive UDP and MAC_RAW mode, and handle the header as well.
* This function can divide to received the packet data.
* On the MACRAW SOCKET, the addr and port parameters are ignored.
* @note In block io mode, it doesn't return until data reception is completed - data is filled as <I>len</I> in socket buffer
* In non-block io mode, it return @ref SOCK_BUSY immediately when <I>len</I> is greater than data size in socket buffer.
*
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
* @param buf Pointer buffer to read incoming data.
* @param len The max data length of data in buf.
* When the received packet size <= len, receives data as packet sized.
* When others, receives data as len.
* @param addr Pointer variable of destination IP address. It should be allocated 4 bytes.
* It is valid only when the first call recvfrom for receiving the packet.
* When it is valid, @ref packinfo[7] should be set as '1' after call @ref getsockopt(sn, SO_PACKINFO, &packinfo).
* @param port Pointer variable of destination port number.
* It is valid only when the first call recvform for receiving the packet.
* When it is valid, @ref packinfo[7] should be set as '1' after call @ref getsockopt(sn, SO_PACKINFO, &packinfo).
*
* @return @b Success : This function return real received data size for success.\n
* @b Fail : @ref SOCKERR_DATALEN - zero data length \n
* @ref SOCKERR_SOCKMODE - Invalid operation in the socket \n
* @ref SOCKERR_SOCKNUM - Invalid socket number \n
* @ref SOCKBUSY - Socket is busy.
*/
int32_t WIZCHIP_EXPORT(recvfrom)(uint8_t sn, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t *port);
/////////////////////////////
// SOCKET CONTROL & OPTION //
/////////////////////////////
#define SOCK_IO_BLOCK 0 ///< Socket Block IO Mode in @ref setsockopt().
#define SOCK_IO_NONBLOCK 1 ///< Socket Non-block IO Mode in @ref setsockopt().
/**
* @defgroup DATA_TYPE DATA TYPE
*/
/**
* @ingroup DATA_TYPE
* @brief The kind of Socket Interrupt.
* @sa Sn_IR, Sn_IMR, setSn_IR(), getSn_IR(), setSn_IMR(), getSn_IMR()
*/
typedef enum
{
SIK_CONNECTED = (1 << 0), ///< connected
SIK_DISCONNECTED = (1 << 1), ///< disconnected
SIK_RECEIVED = (1 << 2), ///< data received
SIK_TIMEOUT = (1 << 3), ///< timeout occurred
SIK_SENT = (1 << 4), ///< send ok
SIK_ALL = 0x1F, ///< all interrupt
}sockint_kind;
/**
* @ingroup DATA_TYPE
* @brief The type of @ref ctlsocket().
*/
typedef enum
{
CS_SET_IOMODE, ///< set socket IO mode with @ref SOCK_IO_BLOCK or @ref SOCK_IO_NONBLOCK
CS_GET_IOMODE, ///< get socket IO mode
CS_GET_MAXTXBUF, ///< get the size of socket buffer allocated in TX memory
CS_GET_MAXRXBUF, ///< get the size of socket buffer allocated in RX memory
CS_CLR_INTERRUPT, ///< clear the interrupt of socket with @ref sockint_kind
CS_GET_INTERRUPT, ///< get the socket interrupt. refer to @ref sockint_kind
CS_SET_INTMASK, ///< set the interrupt mask of socket with @ref sockint_kind
CS_GET_INTMASK ///< get the masked interrupt of socket. refer to @ref sockint_kind
}ctlsock_type;
/**
* @ingroup DATA_TYPE
* @brief The type of socket option in @ref setsockopt() or @ref getsockopt()
*/
typedef enum
{
SO_FLAG, ///< Valid only in getsockopt(), For set flag of socket refer to <I>flag</I> in @ref socket().
SO_TTL, ///< Set/Get TTL. @ref Sn_TTL ( @ref setSn_TTL(), @ref getSn_TTL() )
SO_TOS, ///< Set/Get TOS. @ref Sn_TOS ( @ref setSn_TOS(), @ref getSn_TOS() )
SO_MSS, ///< Set/Get MSS. @ref Sn_MSSR ( @ref setSn_MSSR(), @ref getSn_MSSR() )
SO_DESTIP, ///< Set/Get the destination IP address. @ref Sn_DIPR ( @ref setSn_DIPR(), @ref getSn_DIPR() )
SO_DESTPORT, ///< Set/Get the destination Port number. @ref Sn_DPORT ( @ref setSn_DPORT(), @ref getSn_DPORT() )
#if _WIZCHIP_ != 5100
SO_KEEPALIVESEND, ///< Valid only in setsockopt. Manually send keep-alive packet in TCP mode
#if _WIZCHIP_ > 5200
SO_KEEPALIVEAUTO, ///< Set/Get keep-alive auto transmission timer in TCP mode
#endif
#endif
SO_SENDBUF, ///< Valid only in getsockopt. Get the free data size of Socekt TX buffer. @ref Sn_TX_FSR, @ref getSn_TX_FSR()
SO_RECVBUF, ///< Valid only in getsockopt. Get the received data size in socket RX buffer. @ref Sn_RX_RSR, @ref getSn_RX_RSR()
SO_STATUS, ///< Valid only in getsockopt. Get the socket status. @ref Sn_SR, @ref getSn_SR()
SO_REMAINSIZE, ///< Valid only in getsockopt. Get the remained packet size in other then TCP mode.
SO_PACKINFO ///< Valid only in getsockopt. Get the packet information as @ref PACK_FIRST, @ref PACK_REMAINED, and @ref PACK_COMPLETED in other then TCP mode.
}sockopt_type;
/**
* @ingroup WIZnet_socket_APIs
* @brief Control socket.
* @details Control IO mode, Interrupt & Mask of socket and get the socket buffer information.
* Refer to @ref ctlsock_type.
* @param sn socket number
* @param cstype type of control socket. refer to @ref ctlsock_type.
* @param arg Data type and value is determined according to @ref ctlsock_type. \n
* <table>
* <tr> <td> @b cstype </td> <td> @b data type</td><td>@b value</td></tr>
* <tr> <td> @ref CS_SET_IOMODE \n @ref CS_GET_IOMODE </td> <td> uint8_t </td><td>@ref SOCK_IO_BLOCK @ref SOCK_IO_NONBLOCK</td></tr>
* <tr> <td> @ref CS_GET_MAXTXBUF \n @ref CS_GET_MAXRXBUF </td> <td> uint16_t </td><td> 0 ~ 16K </td></tr>
* <tr> <td> @ref CS_CLR_INTERRUPT \n @ref CS_GET_INTERRUPT \n @ref CS_SET_INTMASK \n @ref CS_GET_INTMASK </td> <td> @ref sockint_kind </td><td> @ref SIK_CONNECTED, etc. </td></tr>
* </table>
* @return @b Success @ref SOCK_OK \n
* @b fail @ref SOCKERR_ARG - Invalid argument\n
*/
int8_t WIZCHIP_EXPORT(ctlsocket)(uint8_t sn, ctlsock_type cstype, void* arg);
/**
* @ingroup WIZnet_socket_APIs
* @brief set socket options
* @details Set socket option like as TTL, MSS, TOS, and so on. Refer to @ref sockopt_type.
*
* @param sn socket number
* @param sotype socket option type. refer to @ref sockopt_type
* @param arg Data type and value is determined according to <I>sotype</I>. \n
* <table>
* <tr> <td> @b sotype </td> <td> @b data type</td><td>@b value</td></tr>
* <tr> <td> @ref SO_TTL </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_TOS </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_MSS </td> <td> uint16_t </td><td> 0 ~ 65535 </td> </tr>
* <tr> <td> @ref SO_DESTIP </td> <td> uint8_t[4] </td><td> </td></tr>
* <tr> <td> @ref SO_DESTPORT </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_KEEPALIVESEND </td> <td> null </td><td> null </td></tr>
* <tr> <td> @ref SO_KEEPALIVEAUTO </td> <td> uint8_t </td><td> 0 ~ 255 </td></tr>
* </table>
* @return
* - @b Success : @ref SOCK_OK \n
* - @b Fail
* - @ref SOCKERR_SOCKNUM - Invalid Socket number \n
* - @ref SOCKERR_SOCKMODE - Invalid socket mode \n
* - @ref SOCKERR_SOCKOPT - Invalid socket option or its value \n
* - @ref SOCKERR_TIMEOUT - Timeout occurred when sending keep-alive packet \n
*/
int8_t WIZCHIP_EXPORT(setsockopt)(uint8_t sn, sockopt_type sotype, void* arg);
/**
* @ingroup WIZnet_socket_APIs
* @brief get socket options
* @details Get socket option like as FLAG, TTL, MSS, and so on. Refer to @ref sockopt_type
* @param sn socket number
* @param sotype socket option type. refer to @ref sockopt_type
* @param arg Data type and value is determined according to <I>sotype</I>. \n
* <table>
* <tr> <td> @b sotype </td> <td>@b data type</td><td>@b value</td></tr>
* <tr> <td> @ref SO_FLAG </td> <td> uint8_t </td><td> @ref SF_ETHER_OWN, etc... </td> </tr>
* <tr> <td> @ref SO_TOS </td> <td> uint8_t </td><td> 0 ~ 255 </td> </tr>
* <tr> <td> @ref SO_MSS </td> <td> uint16_t </td><td> 0 ~ 65535 </td> </tr>
* <tr> <td> @ref SO_DESTIP </td> <td> uint8_t[4] </td><td> </td></tr>
* <tr> <td> @ref SO_DESTPORT </td> <td> uint16_t </td><td> </td></tr>
* <tr> <td> @ref SO_KEEPALIVEAUTO </td> <td> uint8_t </td><td> 0 ~ 255 </td></tr>
* <tr> <td> @ref SO_SENDBUF </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_RECVBUF </td> <td> uint16_t </td><td> 0 ~ 65535 </td></tr>
* <tr> <td> @ref SO_STATUS </td> <td> uint8_t </td><td> @ref SOCK_ESTABLISHED, etc.. </td></tr>
* <tr> <td> @ref SO_REMAINSIZE </td> <td> uint16_t </td><td> 0~ 65535 </td></tr>
* <tr> <td> @ref SO_PACKINFO </td> <td> uint8_t </td><td> @ref PACK_FIRST, etc... </td></tr>
* </table>
* @return
* - @b Success : @ref SOCK_OK \n
* - @b Fail
* - @ref SOCKERR_SOCKNUM - Invalid Socket number \n
* - @ref SOCKERR_SOCKOPT - Invalid socket option or its value \n
* - @ref SOCKERR_SOCKMODE - Invalid socket mode \n
* @note
* The option as PACK_REMAINED and SO_PACKINFO is valid only in NON-TCP mode and after call @ref recvfrom(). \n
* When SO_PACKINFO value is PACK_FIRST and the return value of recvfrom() is zero,
* This means the zero byte UDP data(UDP Header only) received.
*/
int8_t WIZCHIP_EXPORT(getsockopt)(uint8_t sn, sockopt_type sotype, void* arg);
#endif // _WIZCHIP_SOCKET_H_