Commit Graph

156 Commits

Author SHA1 Message Date
Jim Mussared
8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Frederic.Pierson
925f244ab3 stm32/boards: Add NADHAT_PYB405 board. 2019-10-18 11:41:22 +11:00
Damien George
287800d6e1 stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed, frozen files are now referenced via
boards/manifest.py.
2019-10-15 21:36:24 +11:00
ladyada
06ae818f93 stm32/boards: Add new board ADAFRUIT_F405_EXPRESS. 2019-10-11 11:50:36 +11:00
Damien George
4a6974bea5 stm32/boards/PYBD_SF2: Put nimble library in external QSPI XIP flash.
The BLE stack is not performance critical, so put it in external
memory-mapped flash to save internal flash for other things (like frozen
bytecode).
2019-10-05 23:51:33 +10:00
Damien George
26e90a0514 stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
The previous commit changed the default configuration on L4 MCUs to use
LSI, so configure these boards to use LSE again.
2019-10-04 16:10:13 +10:00
Jim Mussared
fafa9d35dd stm32/boards/PYBD: Enable BLE for Pyboard D. 2019-10-01 09:51:02 +10:00
Chris Mason
eb12fa3862 stm32/powerctrlboot: Add support for HSI at 8MHz on F0 MCUs.
For use with F0 MCUs that don't have HSI48.  Select the clock source
explicitly in mpconfigboard.h.

On the NUCLEO_F091RC board use HSE bypass when HSE is chosen because the
NUCLEO clock source is STLINK not a crystal.
2019-09-26 17:34:04 +10:00
iabdalkader
4f78ba3cf4 stm32/boards/NUCLEO_H743ZI: Enable FDCAN on this board. 2019-09-23 17:00:54 +10:00
cristian
cfec054073 stm32/board/NUCLEO_F746ZG: Enable Ethernet periph, lwip and ussl. 2019-09-11 11:20:58 +10:00
Jim Mussared
c8c37ca407 stm32/boards/STM32F769DISC: Fix number of SDRAM row bits.
According to the schematic, the SDRAM part on this board is a
MT48LC4M32B2B5-6A, with "Row addressing 4K A[11:0]" (per datasheet).  This
commit updates mpconfigboard.h from 13 to 12 to match.
2019-09-10 23:13:52 +10:00
Christopher Wilson
f9d142523c stm32/boards/MIKROE_CLICKER2_STM32: Add MikroElektronika Clicker2 board.
- STM32F407VGT6 (1MB of Flash, 192+4 Kbytes of SRAM)
- 5V (via USB) or Li-Polymer Battery (3.7V) power input
- 2 x LEDs
- 2 x user switches
- 2 x mikroBUS sockets
- 2 x 1x26 mikromedia-compatible headers (52 pins)

https://www.mikroe.com/clicker-2-stm32f4
2019-09-10 13:57:01 +10:00
Damien George
2b07f56c2b stm32/boards/NUCLEO_L073RZ: Fix typo in MCU name. 2019-09-10 11:53:00 +10:00
Damien George
bd2e46e0a5 stm32/boards/stm32wb55_af.csv: Fix ADC pin-channel function mapping. 2019-09-06 17:56:34 +10:00
Damien George
5789558d60 stm32/boards/PYBD_SF2: Exclude certain things when building mboot. 2019-08-28 12:37:13 +10:00
Damien George
b1e04848ef stm32/mphalport: Put PYBD specific MAC code in board specific file. 2019-08-28 12:37:13 +10:00
Damien George
8485b72d0d stm32/boards/NUCLEO_L432KC: Add config for USB VCP support. 2019-08-15 12:46:34 +10:00
Damien George
ad0b7cb017 stm32/boards/xxx_WB55: Enable USB HID now that it works on WB MCUs. 2019-07-25 17:49:53 +10:00
badlyby
3b258ef213 stm32/boards/NUCLEO_F722ZE: Add definition files for new board. 2019-07-25 16:31:36 +10:00
badlyby
09267bb147 stm32/boards/stm32f722.ld: Provide memory regions for internal FS. 2019-07-25 16:31:36 +10:00
Damien George
0c12adca46 stm32/boards/USBDONGLE_WB55: Add definition files for new board. 2019-07-17 17:00:34 +10:00
Damien George
d2a8fb747f stm32/boards/NUCLEO_WB55: Add definition files for new board. 2019-07-17 17:00:34 +10:00
Damien George
9849567a06 stm32/boards: Add MCU support files for STM32WB55. 2019-07-17 16:50:42 +10:00
Damien George
02b2ad4fbd stm32/boards/STM32F769DISC: Fix length of FLASH_APP section.
Fixes issue #4924.
2019-07-17 16:19:50 +10:00
Damien George
baea43bba7 stm32/boards/B_L072Z_LRWAN1: Enable USB VCP support. 2019-07-16 14:50:44 +10:00
Damien George
a17b901a9e stm32/boards/B_L072Z_LRWAN1: Add definition files for new board. 2019-07-09 12:54:09 +10:00
Damien George
d43dd886a5 stm32/boards/NUCLEO_F413ZH: Remove STARTUP_FILE, it's defined globally.
The Makefile now defines this variable to the correct value (but it can
still be overridden by a board if necessary).
2019-07-09 11:32:12 +10:00
Chris Mason
c24d81119c stm32/boards/NUCLEO_L452RE: Add definition files for new board. 2019-07-08 16:50:45 +10:00
Chris Mason
64181b5f76 stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
Damien George
eea61a09c4 stm32/boards/NUCLEO_F446RE: Enable DAC. 2019-07-08 16:08:40 +10:00
Damien George
7c2e83324b stm32/boards/NUCLEO_L073RZ: Add definition files for new board. 2019-07-05 17:28:54 +10:00
Damien George
9c096c190c stm32/boards: Add MCU support files for STM32L072. 2019-07-05 17:26:03 +10:00
Damien George
c1a8c7fc09 stm32/boards/PYBD_SFx: Automatically turn on EN_3V3 when powering SD/MMC 2019-07-04 11:11:11 +10:00
Damien George
1cd2bc066d stm32/boards/PYBD_SFx: Configure EN_3V3 pin as output on boot.
But leave it turned off, the application must turn it on if/when needed.
2019-07-04 11:03:10 +10:00
Damien George
7cf8285ac8 stm32/boards: Remove startup_stm32*.s files now they are in stm32lib. 2019-07-03 23:44:17 +10:00
Damien George
73e8b7e0e4 stm32: Update components to work with new H7xx HAL. 2019-07-03 23:40:49 +10:00
Damien George
3581deec81 stm32/boards/PYBD_SF2: Put mbedtls library code in external QSPI flash.
mbedtls is large and self contained so is a good candidate to be in
external XIP flash, to keep enough spare ROM in internal flash.
2019-07-03 16:50:02 +10:00
Damien George
d821a27b58 stm32/boards/PYBD_SFx: Put SPI flash to sleep during sleep modes. 2019-07-03 01:27:33 +10:00
Chris Mason
3786592097 stm32/boards: Optimise flash and RAM allocation for L4 boards.
Optimisations are:
- Remove FLASH_ISR section since devices with a small flash sector erase
  size don't need special FLASH_ISR handling.  This reduces flash image by
  approx 1.5k.
- Make SRAM2 contiguous with SRAM1 where possible.
- Simplify configuration of 2k RAM buffer used for flash filesystem.

RAM changes with this commit:
- L432: stack   6k -> 10k,  bss + heap   42k ->  52k
- L476: stack  16k -> 30k,  bss + heap   80k ->  96k
- L496: stack 206k -> 16k,  bss + heap  112k -> 302k
2019-07-01 16:57:20 +10:00
Damien George
009b1f6559 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
This eliminates a lot of duplicated code in these header files.
2019-06-25 14:18:24 +10:00
Damien George
f96f53cd97 stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
These are intended to be used by all boards, to reduce the size of a
board's configuration.
2019-06-25 14:18:24 +10:00
Damien George
89ebb3325b stm32/boards/pllvalues.py: Support HSx_VALUE defined without uint32_t. 2019-06-25 14:18:24 +10:00
Damien George
04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
Damien George
5da60ff9cb stm32/boards: Enable ussl module via mbedtls for boards with network. 2019-06-24 17:48:28 +10:00
Chris Mason
14cf91f704 stm32: In link script, define start of stack separately from heap end.
Previously the end of the heap was the start (lowest address) of the stack.
With the changes in this commit these addresses are now independent,
allowing a board to place the heap and stack in separate locations.
2019-06-14 15:29:24 +10:00
Damien George
fd839221fd stm32/boards/PYBD_SFx: Enable ussl module using mbedTLS. 2019-06-05 15:38:01 +10:00
Damien George
62fe47aa3a stm32/boards/PYBD_SFx: Enable CYW43 WLAN driver. 2019-06-03 17:14:34 +10:00
Damien George
8f55c74533 stm32/boards: Add board definition files for PYBD -SF2, -SF3, -SF6.
These are core configurations providing PYBv1.x-level features.
2019-05-31 22:44:25 +10:00
Damien George
34cae24e30 stm32/boards/pllvalues.py: Search nested headers for HSx_VALUE defines. 2019-05-31 21:44:53 +10:00
Damien George
f8274d5e7d stm32/boards/make-pins.py: Allow pins.csv to skip or hide board-pin name
If the board-pin name is left empty then only the cpu-pin name is used, eg
",PA0".  If the board-pin name starts with a hyphen then it's available as
a C definition but not in the firmware, eg "-X1,PA0".
2019-05-31 21:41:30 +10:00