Commit Graph

11 Commits

Author SHA1 Message Date
Damien George
9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
iabdalkader
8af9dbbde1 stm32/network_wiznet5k: Fix build error with wiznet5k and lwip enabled.
Commit 4dba04a50f refactored the network code
but the combination of MICROPY_PY_WIZNET5K=5500 and MICROPY_PY_LWIP=1
broke.
2021-12-30 11:54:19 +11:00
iabdalkader
7aab0dc5d8 extmod: Move modnetwork and modusocket from stm32 to extmod.
So they can be used by other ports.
2021-09-15 01:25:12 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
ce8262a164 stm32/modnetwork: Replace generic netif NIC polling with specific code.
It doesn't work to tie the polling of an underlying NIC driver (eg to check
the NIC for pending Ethernet frames) with its associated lwIP netif.  This
is because most NICs are implemented with IRQs and don't need polling,
because there can be multiple lwIP netif's per NIC driver, and because it
restricts the use of the netif->state variable.  Instead the NIC should
have its own specific way of processing incoming Ethernet frame.

This patch removes this generic NIC polling feature, and for the only
driver that uses it (Wiznet5k) replaces it with an explicit call to the
poll function (which could eventually be improved by using a proper
external interrupt).
2019-06-03 17:14:34 +10:00
Damien George
fd523c53c3 stm32/network_wiznet5k: Automatically set MAC if device doesn't have one 2019-04-05 22:37:06 +11:00
Damien George
4f936afc44 stm32/network_wiznet5k: Add ability to set the MAC address. 2019-04-05 22:35:04 +11:00
Damien George
4410efc1e3 stm32/network_wiznet5k: Add ability to trace Ethernet TX and RX frames.
Via: nic.config(trace=2|4)
2019-04-05 22:33:49 +11:00
Damien George
7d86ac6c01 stm32: Add network driver for Wiznet5k using MACRAW mode and lwIP.
The Wiznet5k series of chips support a MACRAW mode which allows the host to
send and receive Ethernet frames directly.  This can be hooked into the
lwIP stack to provide a full "socket" implementation using this Wiznet
Ethernet device.  This patch adds support for this feature.

To enable the feature one must add the following to mpconfigboard.mk, or
mpconfigport.mk:

    MICROPY_PY_WIZNET5K = 5500

and the following to mpconfigboard.h, or mpconfigport.h:

    #define MICROPY_PY_LWIP (1)

After wiring up the module (X5=CS, X4=RST), usage on a pyboard is:

    import time, network
    nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
    nic.active(1)
    while not nic.isconnected():
        time.sleep_ms(50) # needed to poll the NIC
    print(nic.ifconfig())

Then use the socket module as usual.

Compared to using the built-in TCP/IP stack on the Wiznet module, some
performance is lost in MACRAW mode: with a lot of memory allocated to lwIP
buffers, lwIP gives Around 750,000 bytes/sec max TCP download, compared
with 1M/sec when using the TCP/IP stack on the Wiznet module.
2018-06-01 14:21:38 +10:00