Commit Graph

32 Commits

Author SHA1 Message Date
Jim Mussared
924a3e03ec top: Replace upip with mip everywhere.
Updates all README.md and docs, and manifests to `require("mip")`.

Also extend and improve the documentation on freezing and packaging.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-30 17:34:03 +10:00
Jim Mussared
d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
Jim Mussared
203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
Jim Mussared
da7f2537a1 top: Use micropython-lib unconditionally in manifests.
micropython-lib is now a submodule, and the manifest compilation process
will ensure it is available, so manifests no longer need to check that it
is available.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:00:43 +10:00
Ian Davies
fbe9417b90 extmod/ntptime: Factor out ntptime module from esp8266 port.
The ntptime module was previously only included in the ESP8266 port.  This
commit factors that module out into the extmod directory, makes it support
different epochs, and includes it in the rp2 port.
2022-08-06 00:08:32 +10:00
Damien George
9f8087b448 esp8266/boards: Enable reverse-special-methods on GENERIC board.
It increases the firmware size by 292 bytes.

Addresses issue #5897.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-08 23:06:16 +10:00
Damien George
ad7b98c829 esp8266/mpconfigport: Switch to ROM feature level configuration.
This is a no-op in terms of board configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-23 13:07:39 +10:00
Damien George
eef7eae6b2 esp8266/modesp: Remove esp.info() function.
The main functionality of this info function is available via the existing
micropython.mem_info() and micropython.qstr_info() functions.  The printing
of the address space layout doesn't add much and removing esp.info() saves
about 600 bytes.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 11:03:29 +11:00
Damien George
a29c70c9b4 esp8266: Allow building a board to any dest directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-30 15:47:49 +11:00
Damien George
ff4f1f3ab3 esp8266/boards/GENERIC: Enable f-strings.
Costs 612 bytes of code space.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-05 14:05:54 +11:00
Mike Causer
7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Jim Mussared
62fd450e62 drivers/neopixel: Add common machine.bitstream-based neopixel module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George
eb7ae538f9 esp8266/boards/GENERIC_512K: Add custom minimal _boot.py.
Commit 0abf6f830c removed _boot.py from the
manifest for the GENERIC_512K board because the build does not include a
filesystem.  But the main code expects _boot.py to be there and prints an
error if it's not.  So add a custom _boot.py, which just sets the
gc.threshold().

Signed-off-by: Damien George <damien@micropython.org>
2021-06-18 14:13:18 +10:00
Damien George
db8704ecbd esp8266,esp32: Update manifest to point to new dirs in micropython-lib.
Following a refactoring of micropython-lib.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-28 18:32:56 +10:00
Damien George
0abf6f830c esp8266/boards/GENERIC_512K: Add custom manifest without FS modules.
The 512k build does not have a filesystem so there is no reason to include
the filesystem-related modules.  This commit provides a custom manifest.py
for this board which no longer includes: _boot.py, flashbdev.py,
inisetup.py, upip.py, upip_utarfile.py.  This cuts the build down by about
9k of flash.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-26 21:41:40 +10:00
Damien George
b28758054b esp8266: Remove release-specific manifest, disable osdebug by default.
This commit removes release-specific builds for the esp8266 and makes the
normal build of the GENERIC board more like the release build.  This makes
esp8266 like all the other ports, for which there is no difference between
a daily build and a release build, making things less confusing.

Release builds were previously defined by UART_OS=-1 (disable OS messages)
and using manifest_release.py to include more frozen modules.

The changes in this commit are:
- Remove manifest_release.py.
- Add existing modules from manifest_release.py (except example code)
  to the GENERIC board's manifest.py file.
- Change UART_OS default to -1 to disable OS messages by default.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:01:42 +10:00
Rafael Römhild
8f3167a962 esp8266/boards: Allow configuring btree/FAT/LFS2 support when building.
Prior to e0905e85a7 it was possible to
disable btree support on build.  This patch allows to configure btree
support on make again and also the two new introduced options for FAT and
LFS2 filesystems.
2020-05-14 22:16:01 +10:00
Damien George
f2218c2fbd esp8266/esp_mphal: Move most functions in esp_mphal.c from iRAM to iROM.
The ones that are moved out of iRAM should not need to be there, because
either they call functions in iROM (eg mp_hal_stdout_tx_str), or they are
only ever called from a function in iROM and not from an interrupt (eg
ets_esf_free_bufs).

This frees up about 800 bytes of iRAM.
2020-05-08 23:44:57 +10:00
Damien George
caa7725642 esp8266/boards: Move py/pairheap.c code from iRAM to iROM.
It doesn't need to be in iRAM.
2020-05-08 23:40:22 +10:00
Damien George
e0905e85a7 esp8266: Change from FAT to littlefs v2 as default filesystem.
This commit changes the esp8266 boards to use littlefs v2 as the
filesystem, rather than FAT.  Since the esp8266 doesn't expose the
filesystem to the PC over USB there's no strong reason to keep it as FAT.
Littlefs is smaller in code size, is more efficient in use of flash to
store data, is resilient over power failure, and using it saves about 4k of
heap RAM, which can now be used for other things.

This is a backwards incompatible change because all existing esp8266 boards
will need to update their filesystem after installing new firmware (eg
backup old files, install firmware, restore files to new filesystem).

As part of this commit the memory layout of the default board (GENERIC) has
changed.  It now allocates all 1M of memory-mapped flash to the firmware,
so the filesystem area starts at the 2M point.  This is done to allow more
frozen bytecode to be stored in the 1M of memory-mapped flash.  This
requires an esp8266 module with 2M or more of flash to work, so a new board
called GENERIC_1M is added which has the old memory-mapping (but still
changed to use littlefs for the filesystem).

In summary there are now 3 esp8266 board definitions:
- GENERIC_512K: for 512k modules, doesn't have a filesystem.
- GENERIC_1M: for 1M modules, 572k for firmware+frozen code, 396k for
  filesystem (littlefs).
- GENERIC: for 2M (or greater) modules, 968k for firmware+frozen code,
  1M+ for filesystem (littlefs), FAT driver also included in firmware for
  use on, eg, external SD cards.
2020-04-04 16:30:36 +11:00
Damien George
1d4d688b3b esp8266: Enable and freeze uasyncio.
Only included in GENERIC build.
2020-03-26 01:25:46 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
8d0421c3cf esp8266: Put mp_keyboard_interrupt in IRAM.
It was originally in IRAM due to the linker script specification, but
since the function moved from lib/utils/interrupt_char.c to py/scheduler.c
it needs to be put back in IRAM.
2020-02-07 16:08:31 +11:00
Jim Mussared
7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
cea9209e0f esp8266/moduos: Add optional support for VfsLfs1 and VfsLfs2.
With this commit an esp8266-based board can now be built with littlefs
support via, eg "make MICROPY_VFS_LFS2=1".
2019-11-07 18:44:16 +11:00
Damien George
f1d91908fa esp8266/boards: Add manifest_release.py with files for a release.
A release also sets: UART_OS = -1
2019-10-22 00:23:22 +11:00
Jim Mussared
8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Damien George
2fd3f2520d esp8266: Convert to use FROZEN_MANIFEST to specify frozen code.
Removes symlinks in modules directory, all frozen code is now specified by
manifest.py.
2019-10-15 21:36:02 +11:00
Mike Causer
53a9b45da1 esp8266: Add per-board configs, following other ports.
The specific board can be selected with the BOARD makefile variable.  This
defaults (if not specified) to BOARD=GENERIC, which is the original default
firmware build.  For the 512k target use BOARD=GENERIC_512K.
2019-10-10 16:32:25 +11:00