Commit Graph

254 Commits

Author SHA1 Message Date
Damien George
7cdad05e54 rp2/rp2_flash: Add asserts for size of flash filesystem partition.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Damien George
c95f99105a rp2/lwip_inc: Enable lwIP status callback.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Damien George
11f920f8ad rp2/mbedtls: Enable some more mbedtls options.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Jim Mussared
797a83ac3e rp2/mpthreadport: Ensure core1 doesn't hold gc lock in deinit.
Prior to this commit the following code would lock up the device when
Ctrl-D is entered at the REPL:

    import gc, _thread

    def collect_thread():
        while True:
            gc.collect()

    _thread.start_new_thread(collect_thread, [])

Fixes part of #8494.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-06-30 11:53:25 +10:00
Damien George
b004e7e397 rp2/modmachine: Implement lightsleep() with optional sleep period.
This gets basic machine.lightsleep([n]) behaviour working on the rp2 port.
It supports:

- Calling lightsleep without a specified period, in which case it uses xosc
  dormant mode.  There's currently no way to wake it up from this state,
  unless you write to raw registers to enable a GPIO wake up source.

- Calling lightsleep with a period n in milliseconds.  This period must be
  less than about 72 minutes and uses timer alarm3 to wake it up.

The RTC continues to run during lightsleep, but other peripherals have
their clock turned off during the sleep.

It doesn't yet support longer periods than 72 minutes, or waking up from
GPIO IRQ.

Measured current consumption from the USB port on a PICO board is about
1.5mA when doing machine.lightsleep(5000), and about 0.9mA when doing
machine.lightsleep().

Addresses issue #8770.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 11:40:17 +10:00
iabdalkader
de823e7741 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable Arduino 1200bps touch. 2022-06-23 14:32:56 +10:00
Damien George
f5769698e5 extmod/modlwip: Clean up inclusion of modlwip in build process.
The following changes are made:

- Guard entire file with MICROPY_PY_LWIP, so it can be included in the
  build while still being disabled (for consistency with other extmod
  modules).

- Add modlwip.c to list of all extmod source in py/py.mk and
  extmod/extmod.cmake so all ports can easily use it.

- Move generic modlwip GIT_SUBMODULES build configuration code from
  ports/rp2/CMakeLists.txt to extmod/extmod.cmake, so it can be reused by
  other ports.

- Remove now unnecessary inclusion of modlwip.c in EXTMOD_SRC_C in esp8266
  port, and in SRC_QSTR in mimxrt port.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
iabdalkader
f522aabab2 rp2/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:38:21 +10:00
Andrew Scheller
cedb93c179 docs: Update Raspberry Pi URLs from .org to .com. 2022-06-14 11:41:13 +10:00
Damien George
bd375df02c extmod/extmod.cmake: Require components to be explicitly enabled.
Otherwise include directories are added unconditionally to the build
variables if the component (submodule) is checked out.  This can lead to,
eg, the esp32 build using lib/lwip header files, instead of lwip header
files from the IDF.

Fixes issue #8727.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-08 13:03:34 +10:00
Damien George
9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Damien George
66dfe17b18 rp2/CMakeLists: Simplify qstr sources when enabling extmod components.
Also remove redundant modusocket.c and modnetwork.c sources, they are
already added by extmod/extmod.cmake.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Damien George
a446a7bdef rp2/mpnetworkport: Fix lwip alarm callback timing to use microseconds.
The callback passed to add_alarm_in_ms must return microseconds, even
though the initial delay is in milliseconds.  Fix this use, and to avoid
further confusion use the add_alarm_in_us function instead.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
iabdalkader
2111ca0b8f rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Update USB PID.
This PID is allocated for the Arduino Nano RP2040 running MicroPython.
2022-06-03 16:12:44 +10:00
Andrew Leech
ffe5f2efe2 rp2/Makefile: Build in debug mode with "make DEBUG=1".
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Andrew Leech
1b80aa9ce3 rp2/boards/W5100S_EVB_PICO: Add Wiznet W5100S-EVB-Pico board.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Andrew Leech
bca816f5ac rp2: Add support for using Wiznet hardware as an Ethernet NIC.
Uses the extmod/network_wiznet5k driver to provide network connectivity.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Andrew Leech
15fea3a1ff rp2: Integrate lwIP network stack.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:18 +10:00
Andrew Leech
7d9cc69645 rp2/Makefile: Use cmake for "make submodules" task when needed.
Because the submodule list can be updated by cmake files.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
05f927b624 rp2/machine_pin: Add mp_hal_pin_interrupt C interface.
So C can can easily configure a pin interrupt and callback.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
9bd6169b72 rp2/mbedtls: Add support for ssl module with MICROPY_SSL_MBEDTLS.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:06 +10:00
Damien George
efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George
cca08922d9 py/emitinlinethumb: Make ARMv7-M instruction use dynamically selectable.
This follows on from a5324a1074 and allows
mpy-cross to dynamically select whether ARMv7-M instructions are supported
in @micropython.asm_thumb functions.

The config option MICROPY_EMIT_INLINE_THUMB_ARMV7M is no longer needed, it
is now controlled by MICROPY_EMIT_THUMB_ARMV7M.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 11:54:48 +10:00
iabdalkader
0bdfceacbe extmod/network_ninaw10: Add support for socket events callback. 2022-05-26 11:15:07 +10:00
iabdalkader
875caca504 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable webrepl. 2022-05-25 16:05:50 +02:00
iabdalkader
a22d0bda52 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Disable internal errno.
* Internal errno can't be used with Nina module due to an issue
with esp-idf config.
2022-05-25 16:05:50 +02:00
iabdalkader
4bcffbd1c6 rp2/mpconfigport.h: Allow boards to override internal errno config. 2022-05-25 16:05:50 +02:00
iabdalkader
d037e75991 rp2/mpconfigport.h: Enable static scheduler nodes. 2022-05-25 16:05:50 +02:00
Damien George
6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Jim Mussared
62f00a43d5 rp2: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared
bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared
4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared
0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Damien George
0e6873840b rp2/mpconfigport: Enable execfile, NotImplemented and REPL EMACS keys.
To bring this port in line with other ports that use
MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-26 22:15:07 +10:00
Damien George
5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Peter Hinch
d242a9b7f7 rp2/machine_uart: Use read/write mutex to prevent char duplication.
Duplication of characters is caused by re-entrant calls from separate cores
of uart_fill_tx_fifo().  This patch uses a mutex to ensure that a
re-entrant execution of the function returns without affecting the UART
FIFO.

Fixes issues #8344 and #8360.
2022-04-12 11:39:00 +10:00
Damien George
b59989f40e rp2/Makefile: Add mbedtls to GIT_SUBMODULES list and use it in CI func.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 13:05:25 +10:00
Martin Fischer
5873390226 rp2/mphalport: Fix USB CDC RX handling to not block when unprocessed.
Prior to this commit, the USB CDC OUT endpoint got NACK'd if a character
was received but not consumed by the application, e.g. via
sys.stdin.read().  This meant that USB CDC was blocked and no additional
characters could be sent from the host.  In particular a ctrl-C could not
interrupt the application if another character was pending.

To fix the issue, the approach in this commit uses a callback tud_cdc_rx_cb
which is called by the TinyUSB stack on reception of new CDC data.  By
consuming the data immediately, the endpoint does not stall anymore.  The
previous handler tud_cdc_rx_wanted_cb was made obsolete and removed.

In addition some cleanup was done along the way: by adding interrupt_char.c
and removing the existing code mp_hal_set_interrupt_char().  Also, there is
now only one (stdin) ringbuffer.

Fixes issue #7996.
2022-04-05 10:47:19 +10:00
Damien George
86e6744ff5 rp2: Enable ucryptolib, using mbedtls for backend functions.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-04 23:15:01 +10:00
iabdalkader
df86cef59a rp2: Allow Overriding cmake frozen manifest from the command line.
If MICROPY_FROZEN_MANIFEST is set from the cmake command line, then it will
override the default and any manifest set by the board.
2022-03-24 22:10:01 +11:00
iabdalkader
fe8b47e29f ports: Allow boards to define additional network interfaces. 2022-03-24 17:23:28 +11:00
Damien George
818be10bb5 zephyr/moduos: Convert module to use extmod version.
This also adds uos.unlink(), for all ports that use extmod/moduos.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George
926b554daf extmod/moduos: Create general uos module to be used by all ports.
Based on the rp2 port version, with the rp2 port converted to use this
module.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
iabdalkader
507ad03329 rp2: Add USB MSC support.
It is currently not enabled by default on any board.
2022-03-09 00:38:07 +11:00
YoungJoon Chun
2d47020e15 rp2/mpthreadport: Fix memory corruption when thread is created in core1.
The stack (and arg) of core1 is itself a root pointer, not just the entries
in it.  Without this fix the GC could reclaim the entire stack (and
argument object).

Fixes issues #7124 and #7981.
2022-03-01 17:03:57 +11:00
YoungJoon Chun
767058f328 rp2/Makefile: Add FROZEN_MANIFEST Makefile option, to override default. 2022-02-18 14:26:57 +11:00
YoungJoon Chun
d8a7bf83cc rp2/machine_uart: Fix UART RTS behaviour so RTS is deasserted.
The UART hardware flow control was not working correctly, the receive FIFO
was always fetched and RTS was never deasserted.  This is not a problem
when hardware flow control is not used: normally, if the receive FIFO is
full, the UART receiver won't receive data into the FIFO anymore, but the
current implementation fetches from the FIFO and discards it instead.
The problem is that data is discarded even when RTS is enabled.

This commit fixes the issue by only taking from the FIFO if there is room
in the ring buffer to put the character.

Signed-off-by: YoungJoon Chun <yjchun@mac.com>
2022-02-09 16:29:53 +11:00
Damien George
5679fe6aee rp2/modutime: Fix time.localtime day-of-week value.
The correct day-of-week is stored in the RTC (0=Monday, 6=Sunday) so there
is no need to adjust it for the return value of time.localtime().

Fixes issue #7889.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 10:48:59 +11:00
Damien George
fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Damien George
a707fe50b0 rp2/machine_i2c: Use soft I2C only for len=0, and increase timeout.
The RP2040 I2C hardware can do writes of length 1 and 2, just not of length
0.  So only use software I2C for writes of length 0, to improve
performance.

Also increase the software I2C timeout for zero-length writes to
accommodate the behaviour of a wider range of I2C devices.

Fixes issue #8167.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-21 15:10:29 +11:00
iabdalkader
bef26d4e3f rp2/machine_uart: Add machine.UART init/deinit methods.
Without these methods a lot of existing "portable" scripts are broken.
This change improves portability by making rp2 machine.UART more compliant
with the documented machine UART interface.
2022-01-21 15:08:47 +11:00
iabdalkader
5db278f1dd rp2/mphalport: Add optional dupterm support. 2022-01-20 16:57:03 +11:00
iabdalkader
f44fb76055 rp2/mpconfigport.h: Use internal error numbers. 2022-01-20 16:46:14 +11:00
Damien George
7b0a42374e rp2/machine_i2c: Provide more specific error codes from I2C transfer.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-20 16:43:55 +11:00
Damien George
000b001fc1 rp2/boards/GARATRONIC_PYBSTICK26_RP2040: Use correct pico-sdk board cfg.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 16:50:20 +11:00
Damien George
4693cf9081 rp2/CMakeLists.txt: Allow a board to override PICO_BOARD.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 16:49:57 +11:00
iabdalkader
908e4cf5c3 rp2: Add support for DHT11 and DHT22 sensors. 2022-01-06 14:00:03 +11:00
robert-hh
01d9b7adde rp2/machine_pwm: Keep duty value when changing the frequency.
The duty is saved and set whenever the frequency is changed, unless the
duty rate was not set yet.
2022-01-06 13:52:45 +11:00
robert-hh
9e56e630ca rp2/machine_pwm: Fix PWM frequency setting.
The top value was off by 1: in order to count n ticks it has to be set to
n-1.

Fixes issue #8122.
2022-01-06 13:51:19 +11:00
iabdalkader
f4487a0049 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Set default I2C pins. 2022-01-06 13:35:20 +11:00
Damien George
de43b500bd py/runtime: Allow initialising sys.path/argv with defaults.
If MICROPY_PY_SYS_PATH_ARGV_DEFAULTS is enabled (which it is by default)
then sys.path and sys.argv will be initialised and populated with default
values.  This keeps all bare-metal ports aligned.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-18 00:08:07 +11:00
Jim Mussared
86ce442607 ports: Add '.frozen' as the first entry in sys.path.
Frozen modules will be searched preferentially, but gives the user the
ability to override this behavior.

This matches the previous behavior where "" was implicitly the frozen
search path, but the frozen list was checked before the filesystem.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-18 00:08:07 +11:00
iabdalkader
f21c565583 rp2/machine_uart: Handle and clear UART RX timeout IRQ.
The pico-sdk 1.3.0 update in 97a7cc243b
introduced a change that broke RP2 Bluetooth UART, and possibly UART in
general, which stops working right after UART is initialized.  The commit
raspberrypi/pico-sdk@2622e9b enables the UART receive timeout (RTIM) IRQ,
which is asserted when the receive FIFO is not empty, and no more
characters are received for a period of time.

This commit makes sure the RTIM IRQ is handled and cleared in
uart_service_interrupt.
2021-12-14 14:59:39 +11:00
Frédéric Pierson
c422ca3da1 rp2/boards: Add PYBSTICK26 RP2040 board definition. 2021-11-25 21:05:21 +11:00
Mike Causer
172a031dff rp2/boards/PIMORONI_PICOLIPO_16MB: Fix 16MB flash size.
Was incorrectly added as 7MB for an 8MB SPI flash, but this board has a
16MB chip, not 8MB, so it should be 15MB leaving 1MB for MicroPython.

Thanks to @robert-hh
2021-11-19 15:34:07 +11:00
oli
0a9335ecaa rp2/rp2_pio: Support exec with sideset.
The rp2.StateMachine.exec errors when supplying a sideset action.  This
commit passes the sideset_opt from the StateMachine though to the parser.
It also adds some value validation to the sideset operator.

Additionally, the "word" method is added to the exec to allow any other
unsupported opcodes.

Fixes issue #7924.
2021-11-19 13:35:28 +11:00
robert-hh
5ed7a748f0 rp2/boards: Add neopixel.py to manifest.py.
Because machine.bitstream is now implemented on the rp2 port.
2021-11-17 10:02:32 +11:00
robert-hh
b73d8b045a rp2/machine_bitstream: Implement the machine.bitstream driver.
Timing error is ~20ns at 125MHz, and ~10ns at 250MHz.
2021-11-17 10:01:15 +11:00
iabdalkader
c3dceb1c32 rp2/boards: Add support for Arduino Nano RP2040. 2021-11-16 15:05:10 +11:00
iabdalkader
3745c393c8 rp2: Add support for Nina-W10 WiFi/BT module.
This commit integrates the Nina-W10 driver as an optional component in the
rp2 port.
2021-11-13 23:01:37 +11:00
Mike Teachman
b6dbbbe82f rp2/machine_i2s: Add I2S protocol support.
This commit adds I2S protocol support for the rp2 port:
- I2S API is consistent with STM32 and ESP32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- DMA IRQs are managed on an I2S object basis, allowing other
  RP2 entities to use DMA IRQs when I2S is not being used
- MicroPython documentation
- tested on Raspberry Pi Pico development board
- build metric changes for this commit: text(+4552), data(0), bss(+8)

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:27:42 +11:00
Jim Mussared
693b927687 rp2: Enable optimisations (comp goto, map cache, fast attr).
Computed goto costs 1800 bytes for 5-10% performance.

Map caching and attr fast path costs 130 bytes for up to 30%.

Net effect of those three optimisations:
bm_chaos.py         +16.059% (+/-0.09%)
bm_fannkuch.py      +11.145% (+/-0.01%)
bm_fft.py           +14.604% (+/-0.01%)
bm_float.py         +26.849% (+/-0.08%)
bm_hexiom.py        +34.039% (+/-0.03%)
bm_nqueens.py       +18.333% (+/-0.06%)
bm_pidigits.py       +4.472% (+/-0.03%)
misc_aes.py         +28.765% (+/-0.09%)
misc_mandel.py      +27.116% (+/-0.05%)
misc_pystone.py     +40.299% (+/-0.20%)
misc_raytrace.py    +22.812% (+/-0.07%)

Also enable other EXTRA-level optimisations (module const, return_if_expr,
triple_tuple_assign, factorial, mpz bitwise).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-11-01 15:25:45 +11:00
Damien George
c62351fbd6 py/mpconfig.h: Revert MICROPY_REPL_INFO to disabled at all levels.
This is an stm32-specific feature that's accessed via the pyb module, so
not something that will be widely enabled.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-01 15:18:22 +11:00
Jim Mussared
b1a0ce46d1 rp2/mpconfigport.h: Use the "extra" feature level.
This commit is a no-op change to simplify existing config.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-11-01 15:02:58 +11:00
Mike Causer
7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
iabdalkader
38f8e852e0 rp2: Add framework for networking.
MICROPY_PY_NETWORK and MICROPY_PY_USOCKET need to be enabled by a board to
get networking.  No NICs have yet been defined.
2021-09-19 23:20:13 +10:00
iabdalkader
c973cfd2f3 rp2: Add support for bluetooth module using NimBLE. 2021-09-19 23:09:59 +10:00
YoungJoon Chun
bbbdef4cc1 rp2/mpconfigport.h: Enable heapq module.
Fixes issue #7746.
2021-09-04 23:51:14 +10:00
Damien George
af64c2ddbd extmod/machine_pwm: Factor out machine.PWM bindings to common code.
This commit refactors machine.PWM and creates extmod/machine_pwm.c.  The
esp8266, esp32 and rp2 ports all use this and provide implementations of
the required PWM functionality.  This helps to reduce code duplication and
keep the same Python API across ports.

This commit does not make any functional changes.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-04 16:31:17 +10:00
Damien George
d41f6dde56 extmod/modonewire: Make _onewire module configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
afe0634c98 extmod/machine_spi: Make SoftSPI configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
122d901ef1 extmod/machine_i2c: Make SoftI2C configurable via macro option.
The zephyr port doesn't support SoftI2C so it's not enabled, and the legacy
I2C constructor check can be removed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
David Lechner
86371781e9 tools/uncrustify: Force 1 newline at end of file.
To keep things neat and tidy, we ensure that each file has 1 and only 1
newline at the end of each file.

Signed-off-by: David Lechner <david@pybricks.com>
2021-08-31 13:14:45 +10:00
iabdalkader
a3ce8f08ec rp2/mpconfigport.h: Allow boards to add root pointers. 2021-08-29 12:22:50 +10:00
iabdalkader
79baef843b rp2/CMakeLists.txt: Add option to enable double tap reset to bootrom.
* For boards a with reset switch, pressing twice resets into bootloader.
* Enabled by linking with the pico_bootsel_via_double_reset library.
2021-08-29 12:20:01 +10:00
iabdalkader
c82244a7c0 rp2/rp2_flash: Disable IRQs while calling flash_erase/program.
Flash erase/program functions disable the XIP bit.  If any code runs from
flash at the same time (eg an IRQ or code it calls) it will fail and cause
a lockup.
2021-08-29 12:15:01 +10:00
Jim Mussared
b352db7a63 rp2/Makefile: Add "submodules" target, to match other ports.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:54:57 +10:00
Jim Mussared
5733c49174 stm32,esp32,rp2: Enable MICROPY_PY_FSTRINGS by default.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
iabdalkader
23531bca74 rp2/CMakeLists.txt: Allow a board's cmake to set the manifest path.
This allows boards to add frozen modules, or bypass the port manifest
entirely.
2021-08-10 11:05:33 +10:00
Mike Causer
71722c84ca rp2/boards: Add Pimoroni Tiny 2040. 2021-08-01 23:07:57 +10:00
Mike Causer
042a4bebc3 rp2/boards: Add Pimoroni Pico LiPo 16MB. 2021-08-01 23:07:05 +10:00
Mike Causer
95eff8d96a rp2/boards: Add Pimoroni Pico LiPo 4MB. 2021-08-01 23:06:06 +10:00
Mike Causer
02cbe018a5 rp2/boards: Add Adafruit QT Py RP2040. 2021-08-01 23:04:59 +10:00
Mike Causer
043848158d rp2/boards: Add Adafruit ItsyBitsy RP2040. 2021-08-01 23:03:30 +10:00
Mike Causer
e7a3e6ee6a rp2/boards/SPARKFUN_THINGPLUS: Configure I2C/SPI default pins. 2021-08-01 23:02:30 +10:00
Mike Causer
6986a8d680 rp2/boards/SPARKFUN_PROMICRO: Configure UART/I2C/SPI default pins. 2021-08-01 23:01:36 +10:00
Mike Causer
49497084f1 rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure I2C/SPI default pins. 2021-08-01 17:15:18 +10:00
iabdalkader
23e2e00779 rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure custom VID/PID. 2021-08-01 10:51:50 +10:00
iabdalkader
7ae9e6ef69 rp2/tusb_port: Allow boards to configure USB VID and PID.
By defining MICROPY_HW_USB_VID and MICROPY_HW_USB_PID.
2021-08-01 10:51:24 +10:00
robert-hh
ee49ae8f82 rp2/machine_uart: Fix read when FIFO has chars but ringbuf doesn't.
Prior to this fix, if the UART hardware FIFO had a few chars but still
below the FIFO trigger threshold, and the ringbuf was empty, the read
function would timeout if timeout==0 (the default timeout).

This fix follows the suggestion of @iabdalkader.
2021-07-25 17:48:50 +10:00
iabdalkader
2e62e13455 rp2/machine_uart: Fix poll ioctl to also check hardware FIFO.
The RX IRQ does not trigger if the FIFO is less than the trigger level, in
which case characters may be available in the FIFO, yet not in the ringbuf,
and the ioctl returns false.
2021-07-25 17:11:03 +10:00
Mike Causer
cc77b30639 rp2/machine_spi: Allow boards to configure SPI pins using new macros. 2021-07-19 23:16:11 +10:00
Mike Causer
79da7757cc rp2/machine_i2c: Allow boards to configure I2C pins using new macros. 2021-07-19 23:16:11 +10:00
iabdalkader
4f2a10bfc9 rp2/machine_uart: Allow overriding default machine UART pins. 2021-07-19 23:14:02 +10:00
iabdalkader
8599f7a68d rp2/machine_uart: Add hardware flow control support. 2021-07-19 23:13:57 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George
0613d3e356 rp2/tusb_config.h: Set CFG_TUD_CDC_EP_BUFSIZE to 256.
This improves the speed of data going out of the MCU.

See related #7479.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-08 13:20:53 +10:00
Damien George
031fe0f144 rp2/CMakeLists.txt: Suppress compiler errors for pico-sdk and tinyusb.
These warnings appear with GCC 11.  Keep them as warnings but not as
compiler errors so they can be dealt with properly in the future.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-05 16:18:28 +10:00
Krzysztof Adamski
feb7e2e864 rp2/machine_rtc: In RTC.datetime, compute weekday automatically.
Calculating the weekday each time you want to set a date is error prone and
tiresome.  MicroPython can do it on its own - hardware on some ports do not
support storing weekday in hardware and always computes it on the fly,
ignoring the value given to the constructor.

During discussion for #7432 the conclusion was that there seems to be no
obvious reason to let user set the weekday to an incorrect value so it
makes sense to just ignore the provided weekday value and always compute
the correct value.  This patch introduces this change for the rp2 port.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
2021-06-25 10:29:45 +10:00
Krzysztof Adamski
35b1359a3a rp2: Use 0=Monday datetime convention in RTC.
The RTC in rp2 can store any, even wrong, number as a weekday in RTC.  It
was, however, discussed in #7394 that we would like to unify all ports and
use 0 as Monday, not Sunday in the machine.RTC implementation.

This patch makes sure that the default date set in RTC is adheres to this
convention.  It also fixes the example in quickref to use proper weekday to
avoid confusion.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
2021-06-25 10:29:12 +10:00
Krzysztof Adamski
e7f7094ef6 rp2/machine_rtc: Check return value from rtc_set_datetime.
The rtc_set_datetime() from pico-sdk will validate the values in the
datetime_t structure and refuse to set the time if they aren't valid. It
makes sense to raise an exception if this happens instead of failing
silently which might be confusing (as an example, see:
https://github.com/micropython/micropython/pull/6928#issuecomment-860166044
).
2021-06-15 00:06:26 +10:00
Krzysztof Adamski
37d01d4be3 rp2/machine_rtc: Add initial support for RTC.
Initial support for machine.RTC on rp2 port. It only supports datetime()
method and nothing else. The method gets/returns a tuple of 8 items, just
like esp32 port, for example, but the usec parameter is ignored as the RP2
RTC only works up to seconds precision.

The Pico RTC isn't very useful as the time is lost during reset and there
seems to be no way to easily power up just the RTC clock with a low current
voltage, but still there seems to be use-cases for that, see issues #6831,
and a Thonny issue #1592. It was also requested for inclusion on v1.15
roadmap on #6832.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
2021-06-12 23:02:54 +10:00
Damien George
4404dababb rp2/CMakeLists.txt: Include tinyusb_common in PICO_SDK_COMPONENTS.
So the TinyUSB headers can be found during qstr processing.

Fixes issue #7236.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-11 12:46:18 +10:00
Damien George
d0de16266f rp2/mpthreadport: Add mp_thread_deinit to reset core1 on soft reset.
Any code running on core1 should be stopped on soft-reset (the GC heap is
reset so if code continues to run on core1 it will see corrupt memory).

Signed-off-by: Damien George <damien@micropython.org>
2021-05-09 00:08:30 +10:00
Damien George
8172c2e9c5 rp2: Move manifest.py to boards directory.
To match other ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-04 23:39:24 +10:00
robert-hh
1e2f0d2809 rp2/tusb_port: Add the device unique-id to the USB id.
The number shown in the USB id is now the same as that returned by
machine.unique_id().  All 8 bytes are inserted as hex into the USB id.  A
usb id at /dev/serial/by-id then looks like:

    usb-MicroPython_Board_in_FS_mode_e469b03567342f37-if00
2021-05-02 23:38:01 +10:00
Jan Jurgen Griesfeller
d80a037e6b rp2/boards: Add board definition for SparkFun Pro Micro board. 2021-05-02 23:23:27 +10:00
Jan Jurgen Griesfeller
3c918d0f58 rp2/boards: Add board definition for SparkFun Thing Plus RP2040. 2021-05-02 23:22:46 +10:00
Damien George
e9e9c76ddf all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
To match mp_sched_exception() and mp_sched_schedule().

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Tim Radvan
f842a40df4 rp2/rp2_pio: Add fifo_join support for PIO.
The PIO state machines on the RP2040 have 4 word deep TX and RX FIFOs.  If
you only need one direction, you can "merge" them into either a single 8
word deep TX or RX FIFO.

We simply add constants to the PIO object, and set the appropriate bits in
`shiftctrl`.

Resolves #6854.

Signed-off-by: Tim Radvan <tim@tjvr.org>
2021-04-17 00:45:38 +10:00
jahr
7ca686684e rp2: Add support for building different board configurations.
This change allows to build firmware for different rp2-based boards,
following how it is done in other ports like stm32 and esp32.  So far only
the original Pico and Adafruit Feather RP2040 are added.  Board names
should match (sans case) those in pico-sdk/src/boards/include/boards/.

Usage: Pico firmware can be build either using make as previously (it is
the default board) or by `make BOARD=PICO`.  Feather is built by `make
BOARD=ADAFRUIT_FEATHER_RP2040`.  Only the board name and flash drive size
is set, pin definition is taken from the appropriate pico-sdk board
definition.  Firmware is saved in the directory build-BOARD_NAME.
2021-04-12 21:40:32 +10:00
robert-hh
1be74b94b6 rp2/machine_uart: Add buffered transfer of data with rxbuf/txbuf kwargs.
Instantiation and init now support the rxbuf and txbuf keywords for setting
the buffer size.  The default size is 256 bytes.  The minimum and maximum
sizes are 32 and 32766 respectively.

uart.write() still includes checks for timeout, even if it is very unlikely
to happen due to a) lack of flow control support and b) the minimal timeout
values being longer than the time it needs to send a byte.
2021-04-12 21:31:08 +10:00
robert-hh
22554cf8e2 rp2/rp2_pio: Add StateMachine restart,rx_fifo,tx_fifo helper functions.
StateMachine.restart: Restarts the state machine
StateMachine.rx_fifo: Return the number of RX FIFO items, 0 if empty
StateMachine.tx_fifo: Return the number of TX FIFO items, 0 if empty

restart() seems to be the most useful one, as it resets the state machine
to the initial state without the need to re-initialise/re-create.  It also
makes PIO code easier, because then stalling as an error state can be
unlocked.

rx_fifo() is also useful, for MP code to check for data and timeout if no
data arrived.  Complex logic is easier handled in Python code than in PIO
code.

tx_fifo() can be useful to check states where data is not processed, and is
mostly for symmetry.
2021-04-11 22:41:54 +10:00
robert-hh
6f06dcaee5 rp2/moduos: Implement uos.urandom().
The implementation samples rosc.randombits at a frequency lower than the
oscillator frequency.  This gives better random values.  In addition, for
an 8-bit value 8 samples are taken and fed through a 8-bit CRC,
distributing the sampling over the byte.  The resulting sampling rate is
about 120k/sec.

The RNG does not include testing of error conditions, like the ROSC being
in sync with the sampling or completely failing.  Making the interim value
static causes it to perform a little bit better in short sync or drop-out
situations.

The output of uos.urandom() performs well with the NIST800-22 test suite.
In my trial it passed all tests of the sts 2.1.2 test suite.  I also ran a
test of the random data with the Common Criteria test suite AIS 31, and it
passed all tests too.
2021-04-09 18:24:38 +10:00
Damien George
2c9af1c1d7 rp2/rp2_pio: Validate state machine frequency in constructor.
Fixes issue #7025.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 18:06:10 +10:00
Damien George
5dcc9b3b16 py/py.cmake: Introduce MICROPY_INC_CORE as a list with core includes.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:08:35 +10:00
Damien George
0fabda31de py/py.cmake: Move qstr helper code to micropy_gather_target_properties.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:08:35 +10:00
Tim Radvan
4f53f462ca rp2: Import uarray instead of array in rp2 module.
Some forum users noticed that `sm.exec()` took longer the more was present
on the flash filesystem connected to the RP2040.  They traced this back to
the `array` import inside `asm_pio()`, which is causing MicroPython to scan
the filesystem.

uarray is a built-in module, so importing it shouldn't require scanning the
filesystem.

We avoid moving the import to the top-level in order to keep the namespace
clean; we don't want to accidentally expose `rp2.array`.
2021-04-07 10:06:18 +10:00
Damien George
2d8aecd2ad rp2/CMakeLists.txt: Enable USB enumeration fix.
This is a workaround for errata RP2040-E5, and is needed to make USB more
reliable on certain USB ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 11:40:02 +10:00
Liam Fraser
ca3d51f122 rp2: Don't advertise remote wakeup for USB serial.
This USB feature is currently not supported.  With this flag enabled (and
the feature not implemented) the USB serial will stop working if there is a
delay of more than about 2 seconds between messages, which can occur with
USB autosuspend enabled.

Fixes issue #6866.
2021-03-31 13:50:21 +11:00
Phil Howard
0cf12dd59c rp2: Add support for USER_C_MODULES to CMake build system.
The parts that are generic are added to py/ so they can be used by other
ports that use CMake.

py/usermod.cmake:

* Creates a usermod target to hang user C/CXX modules from.
* Gathers sources from user C/CXX modules and libs for QSTR scan.

ports/rp2/CMakeLists.txt:

* Includes py/usermod.cmake.
* Links the resulting usermod library to the MicroPython target.

py/mkrules.cmake:

Add cxxflags to qstr.i.last custom command for CXX modules:

* MICROPY_CPP_FLAGS so CXX modules will find includes.
* -DNO_QSTR to fix fatal error missing "genhdr/qstrdefs.generated.h".

Usage:

The rp2 port can be linked against user C modules by running:

make USER_C_MODULES=/path/to/module/micropython.cmake

CMake will print a list of included modules.

Co-authored-by: Graham Sanderson <graham.sanderson@raspberrypi.org>
Co-authored-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca>
Signed-off-by: Phil Howard <phil@pimoroni.com>
2021-03-31 00:26:01 +11:00
Phil Howard
ccc388f157 rp2/mpthreadport.h: Cast core_state to _mp_state_thread_t.
Required for user C++ code to build successfully against ports/rp2.

Signed-off-by: Phil Howard <phil@pimoroni.com>
2021-03-31 00:25:51 +11:00
Damien George
a9140ab09b rp2: Use core-provided cmake fragments instead of custom ones.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 15:53:18 +11:00
Damien George
dcaf702578 rp2/modmachine: Enable machine.Signal class.
Fixes issue #6863.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 00:19:04 +11:00
Damien George
8010b15968 rp2: Enabled more core Python features.
This brings the port's configuration closer to the stm32 and esp32 ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 00:17:22 +11:00
Kevin Köck
af45d511f1 rp2: Enable uerrno module.
Fixes #6991.
2021-03-13 23:34:50 +11:00
Andrew Scheller
b6489425c6 rp2/rp2_flash: Prevent MICROPY_HW_FLASH_STORAGE_BASE being set negative. 2021-03-12 00:57:29 +11:00
robert-hh
c675452566 rp2/modmachine: Re-init UART for REPL on frequency change.
When UART is used for REPL and the MCU frequency is changed, the UART
has to be re-initialised.  Besides that the UART may have to be recreated
after a frequency change, but with USB REPL this is not a problem.

Thanks to @HermannSW for spotting and providing the change.
2021-03-12 00:49:30 +11:00
robert-hh
11cf742524 rp2/modmachine: Allow changing CPU clock frequency.
Using the standard machine.freq().

The safe ranges tested were 10 and 12-270MHz, at which USB REPL still
worked.  Requested settings can be checked with the script:
pico-sdk/src/rp2_common/hardware_clocks/scripts/vcocalc.py.  At frequencies
like 300MHz the script still signaled OK, but USB did not work any more.
2021-03-12 00:48:46 +11:00
robert-hh
0461640983 rp2/rp2_pio: Fix sm.get(buf) to not wait after getting last item.
sm.get(buf) was waiting for one item more than the length of the supplied
buffer.  Even if this item was not stored, sm_get would block trying to get
an item from the RX fifo.

As part of the fix, the edge case for a zero length buffer was moved up to
the section where the function arguments are handled.  In case of a zero
length buffer, sm.get() now returns immediately that buffer.
2021-03-12 00:39:26 +11:00
robert-hh
a075e0b7d8 rp2/rp2_pio: Allow more than 8 consecutive pins for PIO out/set/sideset.
The bitmasks supplied for initialization of out/set/sideset were only 8 bit
instead of 32.  This resulted in an error, that not more than 8 consecutive
pins would get initialized.

Fixes issue #6933.
2021-03-12 00:26:32 +11:00
robert-hh
da85cb014a rp2/machine_uart: Add support for inverted TX and RX lines.
Usage as in the other ports:

    keyword "invert"
    constants: INV_TX and INV_RX

Sample: uart = UART(1, invert=UART.INV_TX | UART.INV_RX)
2021-03-11 18:27:53 +11:00
robert-hh
8ade163fff rp2/machine_uart: Add timeout/timeout_char to read and write. 2021-03-11 18:19:15 +11:00
StereoRocker
8610bababe rp2: Enable VfsFat class for FAT filesystem support.
Allows interfacing with SD cards, for example.
2021-03-11 17:56:21 +11:00
Damien George
53f5bb05a9 rp2,stm32: Enable MICROPY_PY_UBINASCII_CRC32 to get ubinascii.crc32().
These ports already have uzlib enabled so this additional ubinascii.crc32
function only costs about 90 bytes of flash.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-23 10:13:25 +11:00
Damien George
c9260dda23 rp2: Use local tinyusb instead of the one in pico-sdk.
So that all MicroPython ports that use tinyusb use the same version.  Also
requires fewer submodule checkouts when building rp2 along with other ports
that use tinyusb.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-12 12:56:28 +11:00
Damien George
1f800cac3c rp2/micropy_rules.cmake: Fix makemoduledefs vpath to work with abs path.
In particular the firmware can now be built in a build directory that lives
outside the source tree, and the py/modarray.c file will still be found.

See issue #6837.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-05 01:10:30 +11:00
Damien George
7f7b4f2bc6 rp2/machine_adc: Only initialise the ADC periph if not already enabled.
Otherwise it resets the ADC peripheral each time a new ADC object is
constructed, which can reset other state that has already been set up.

See issue #6833.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 10:55:43 +11:00
Damien George
195e7dfa06 rp2/modmachine: Implement additional functions incl unique_id and idle.
Added functions in the machine module are:
- unique_id (returns 8 bytes)
- soft_reset
- idle
- lightsleep, deepsleep (not power saving at the moment)
- disable_irq, enable_irq
- time_pulse_us

Signed-off-by: Damien George <damien@micropython.org>
2021-02-02 22:14:22 +11:00