Commit Graph

52 Commits

Author SHA1 Message Date
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Zoltán Vörös
8c02b94946 nrf: Add more math sources to Makefile, and enable log2 implementation.
This commit adds a few math functions to the source list in the Makefile,
and implements the log2f function, so that ulab can be compiled on the nrf
boards.  It also addresses part of #5162.
2021-06-08 16:39:47 +10:00
Glenn Ruben Bakke
634f6df324 nrf/Makefile: Add support for flashing with nrfutil.
An additional Makefile parameter NRFUTIL_PORT can be set in order
to define the serial port to used for the DFU (Default: /dev/ttyACM0).

The "nrfutil" that is used as flasher towards OpenBootloader is
available for installation through Python "pip".

In case of SD=s140, SoftDevice ID 0xB6 is passed to nrfutil's package
generation which corresponds to SoftDevice s140 v6.1.1.
2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke
718397a37d nrf/Makefile: Add bootloader specific section.
Add the option for "mpconfigboard.mk" to define whether the
board hosts a bootloader or not. The BOOTLOADER make variable
must be set to the name of the bootloader.

When the BOOTLOADER name is set it is also required to supply
the BOOTLOADER_VERSION_MAJOR and the BOOTLOADER_VERSION_MINOR
from the "mpconfigboards.mk". These will be used to resolve which
bootloader linker script that should be passed to the linker.

The BOOTLOADER section also supplies the C-compiler with
BOOTLOADER_<bootloader name>=<version major><version minor>
as a compiler define. This is for future use in case a bootloader
needs to do modification to the startup files or similar (like
setting the VTOR specific to a version of a bootloader).
2020-12-07 20:04:50 +01:00
Roberto Colistete Jr
91c5d168c0 nrf/Makefile: Improve user C modules support.
Add CFLAGS_EXTRA to CFLAGS. Include LDFLAGS_MOD to the compilation.
And, add SRC_MOD to SRC_QSTR.
2020-08-26 22:14:40 +02:00
Glenn Ruben Bakke
c2317a3a8d nrf/Makefile: Disable ROM text compression when compiling for debug.
When compiling for debug (-O0) the .text segment cannot fit the flash
region when MICROPY_ROM_TEXT_COMPRESSION=1, because the compiler does not
optimise away the large if-else chain used to select the correct compressed
string.

This commit enforces MICROPY_ROM_TEXT_COMPRESSION=0 when compiling for
debug (DEBUG=1).
2020-07-01 22:54:52 +10:00
Jim Mussared
cd9a8c1742 nrf: Add openocd as a supported flasher.
Tested with the Particle Debugger on a Xenon.
2020-05-15 15:06:02 +10:00
Jim Mussared
e7f8c7d9a3 nrf: Update to work with nrfx v2.0.0, to match TinyUSB.
Commit 6cea369b89 updated the TinyUSB
submodule to a version based on nrfx v2.0.0.  This commit updates the nrf
port to work with the latest TinyUSB and nrfx v2.0.0.
2020-05-15 15:06:02 +10:00
Damien George
eb5e9c00f8 nrf/Makefile: Don't use -fno-builtin for Cortex-M0 builds.
So that error string compression is optimised correctly (it needs strcmp to
be optimised away by the compiler).
2020-05-15 13:39:12 +10:00
Jim Mussared
073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Zoltán Vörös
c5cc64175b ports: Add lib/libm/roundf.c to bare-metal Makefile's.
This function is not used by the core but having it as part of the build
allows it to be used by user C modules, or board extensions.  The linker
won't include it in the final firmware if it remains unused.
2020-03-25 01:22:00 +11:00
Damien George
6ad3bb1e12 nrf: Remove custom "random" module and use extmod version instead.
Hardware RNG code is moved to drivers/rng.[ch].
2020-02-18 12:43:16 +11:00
David Lechner
e79424d672 ports: Allow overriding CROSS_COMPILE in a custom makefile.
Many ports already allow overriding CROSS_COMPILE.  This modifies the
remaining ports to allow it as well.
2019-12-27 23:53:16 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Glenn Ruben Bakke
82fe6b0526 nrf: Add nrf9160 base support.
This patch add basic building blocks for nrf9P60.

It also includes a secure bootloader which forwards all
possible peripherals that are user selectable to become
non-secure. After configuring Flash, RAM and peripherals
the secure bootloader will jump to the non-secure domain
where MicroPython is placed.

The minimum size of a secure boot has to be a flash
block of 32Kb, hence why the linker scripts are
offsetting the main application this much.

The RAM offset is set to 128K, to allow for later
integration of Nordic Semiconductor's BSD socket
library which reserves the range 0x20010000 - 0x2001FFFF.
2019-10-10 21:35:27 +02:00
Glenn Ruben Bakke
60b0b69f20 nrf: Add tinyusb support for nrf52840.
Add nrf-port finyusb driver files. USB CDC can be activated
by board configuration files using the MICROPY_HW_USB_CDC.

Updating BLE driver, Makefile, nrfx-glue and main.c to plug
in the tinyusb stack.
2019-10-10 20:21:07 +02:00
Damien George
2863dcdf4f nrf: Add support to activate MICROPY_PY_SYS_STDFILES.
Fixes issue #5162.
2019-10-08 16:38:04 +11:00
Glenn Ruben Bakke
cf383412ef nrf/flash: Update flash driver to use nrfx_nvmc driver.
The the nrfx driver is aware of chip specific registers, while
the raw HAL abstraction is not. This driver enables use of NVMC
in non-secure domain for nrf9160.
2019-10-02 21:28:34 +02:00
Jim Mussared
d36fc4682e nrf/Makefile: Add support for flashing with a Black Magic Probe.
Also rename "flash" target to "deploy" to match other ports (but provide
"flash" as an alias for backwards compatibility).
2019-09-05 22:56:05 +10:00
Nguyen Hoan Hoang
9a6f6fd68d nrf/boards: Add support for BLYST Nano module based boards.
- IBK-BLYST-NANO: Breakout board
- IDK-BLYST-NANO: DevKit board with builtin IDAP-M CMSIS-DAP Debug JTAG,
  RGB led
- BLUEIO-TAG-EVIM: Sensor tag board (environmental sensor
  (T, H, P, Air quality) + 9 axis motion sensor)

Also, the LED module has been updated to support individual base level
configuration of each LED. If set, this will be used instead of the
common configuration, MICROPY_HW_LED_PULLUP. The new configuration,
MICROPY_HW_LEDX_LEVEL, where X is the LED number can be used to set
the base level of the specific LED.
2019-05-02 22:33:44 +02:00
Glenn Ruben Bakke
1f5d945afa nrf/Makefile: Update to match latest oofatfs version.
See corresponding commit b5f33ac2cb
2019-04-01 19:22:25 +02:00
Damien George
55632af70a nrf/Makefile: Make sure dependencies for pins_gen.c are correct. 2018-07-20 14:11:28 +10:00
Ayke van Laethem
8df342d330 nrf: Include $(SRC_MOD) in the build.
Also, remove the unused $(SRC_LIB).
2018-07-19 00:35:24 +10:00
Glenn Ruben Bakke
ea00717a57 nrf: Compile nlr objects with -fno-lto flag
To prevent over-optimizations of nlr and nlrthumb when -flto is used
the flag -fno-lto is set on these modules during compilation.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
14d257c66b nrf: Add explicit make flag for oofatfs
Adding MICROPY_FATFS as makefile flag in order to explicitly
include oofatfs files to be compiled into the build.

The flag is set to 0 by default. Must be set in addition to
MICROPY_VFS and MICROPY_VFS_FAT in mpconfigport.h.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
db67a5000f nrf: Generalize feather52 target
This patch generalize the feather52 target to be a board without
an in-built Bluetooth stack or bootloader giving all flash memory to
micropython code.

This way the feather52 target can run any supported Bluetooth LE
stack the port supports for other nrf52832 targets. Hence, this
make Makefiles/linker scripts and BLE driver support easier
to maintain in the future.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
6011441342 nrf: Move pyb module to boards module
Cleaning up use of "pyb" module.
Moving the file to a new folder and updating the
makefile accordingly. New module created called
"board" to take over the functionality of the legacy
"pyb" module.

Updating outdated documentation referring to pyb.Pin,
to now point to machine.Pin.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
774638e2a9 nrf/boards/feather52: Move phony targets to main Makefile
dfu-gen .PHONY target is run unconditionally as first build
target when included, and might fail if the hex file is not
yet generated.

To prevent this, the dfu-gen and dfu-flash targets are moved
to the main Makefile and only exposed if feather52 is the
defined BOARD.
2018-07-18 17:12:26 +10:00
Ayke van Laethem
4111206bd5 nrf/Makefile: Refine dead-code elimination parameters.
Clang warns about useless -Wl,--gc-sections passed in CFLAGS.
2018-07-18 17:12:26 +10:00
Ayke van Laethem
ab72b5b69c nrf/Makefile: Use C11 instead of Gnu99.
Some constructs require C11 which GCC silently allows.
2018-07-18 17:12:26 +10:00
Ayke van Laethem
a6ae950b75 nrf/Makefile: Remove -fstack-usage.
-fstack-usage is not supported by Clang and old GCC versions.
2018-07-18 17:12:26 +10:00
Ayke van Laethem
5fdebe62d3 nrf/Makefile: use "standard" GCC -fshort-enums instead of --short-enums.
Clang understands only -fshort-enums, not --short-enums. As
--short-enums isn't even mentioned in the gcc man page, I think this
alias exists more for backwards compatibility.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
67fd67f549 nrf/modules/machine/spi: SPIM (EasyDMA) backend for nrf52x
This patch moves all nrf52 targets to use SPIM backend
for SPI which features EasyDMA. The main benefit of doing
this is to utilize the SPIM3 on nrf52840 which is
EasyDMA only peripheral.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
6e8a605500 nrf/modules/machine/pin: Add support for IRQ on Pin's
This patch ads irq method to the pin object. Handlers
registered in the irq method will be kept as part of the
ROOT_POINTERS.

In order to resolve which pin object is the root of the
IRQ, the pin_find has been extended to also be able to
search up Pin objects based on mp_int_t pin number.
This also implies that the Pin.new API is now also supporting
creation of Pin objects based on the integer value of the
pin instead of old style mandating string name of the Pin.

All boards have been updated to use real pin number from
0-48 instead of pin_Pxx for UART/SPI and music module pins.

UART/SPI/modmusic has also been updated to use pin number
provided directly or look up the Pin object based on the
integer value of the pin (modmusic).

Pin generation has been updated to create a list of pins, where
the board/cpu dicts are now refering to an index in this list
instead of having one const declaration for each pin. This new
const table makes it possible to iterate through all pins generated
in order to locate the correct Pin object.
2018-07-18 17:12:26 +10:00
Ayke van Laethem
2de65dda22 nrf: Make linker scripts more modular.
With all the variation in chips and boards it's tedious to copy and
redefine linker scripts for every option. Making linker scripts more
modular also opens up more possibilities, like enabling/disabling the
flash file system from the Makefile - or even defining it's size from a
Makefile argument (FS_SIZE=12 for a 12kB filesystem if tight on space).
2018-07-18 17:12:26 +10:00
Ayke van Laethem
375bc31f4b nrf: Enable -g flag by default.
This does not affect binary output, but makes debugging a whole lot
easier.
2018-07-18 17:12:26 +10:00
Ayke van Laethem
1949719e1d nrf/Makefile: Fix .PHONY target.
It must be in uppercase.
2018-07-18 17:12:26 +10:00
glennrub
002f7d1ad7 nrf: Replace custom-HAL with nrfx-HAL
Summarized this squashed PR replaces the hal/ folder in the port. This has been replaced the official
HAL layer from Nordic Semiconductor; https://github.com/NordicSemiconductor/nrfx.

A Git submodule has been added under lib/nrfx, for the nrfx dependency.

The drivers / modules has been updated to use this new HAL layer; nrfx at v1.0.0.

Also, header files and system files for nrf51/nrf52x chip variants has been deleted from the device/ folder, only keeping back the startup files written in C. All other files are now fetched from nrfx.

3 new header files in the ports/nrf/ folder has been added to configure nrfx (nrfx_config.h), logging (nrfx_log.h) and glue nrfx together with the drivers and modules from micropython (nrfx_glue.h).

The PR has been a joint effort from @aykevl (Ayke van Laethem) and @glennrub.

For reference, the commit log will be kept to get an overview of the changes done:

* ports/nrf: Initial commit for moving hal to Nordic Semiconductor BSD-3 licensed nrfx-hal.

* ports/nrf: Adding nrfx, Nordic Semiconductor BSD-3 hal layer, as git submodule checked out at lib/nrfx.

* ports/nrf/modules/machine/uart: Fixing bug which set hwfc to parity excluded, always resulting in no flow control, hence corrupted output. Also adding an extra loop on uart_tx_char to prevent any tx when any ongoing tx is in progress.

* ports/nrf/i2c: Moving I2C over to nrfx driver.

* ports/nrf/modules/machine/i2c: Alignment. Renaming print function param 'o' to 'self_in'

* ports/nrf/spi: Updating SPI machine module to use nrfx drivers.

* ports/nrf: Renaming modules/machine/rtc.c/.h to rtcounter.c/.h to not confuse the peripheral with Real-Time Clock:

* ports/nrf: Updating various files after renaming machine module RTC to RTCounter.

* ports/nrf: Renaming RTC to RTCounter in modmachine globals dict table. Also updating object type name to reflect new module name.

* ports/nrf: Fixing leftovers after renaming rtc to rtcounter.

* ports/nrf: Early untested adoption of nrfx_rtc in RTCounter. Untested.

* nrf/modules/machine/i2c: Improve keyword argument handling

* ports/nrf/modules/temp: Updating Temp machine module to use nrfx defined hal nrf_temp.h. Moving logic of BLE stack awareness to machine module.

* ports/nrf/boards/pca10040: Enable machine Temp module.

* nrf/modules/machine/rtcounter: Remove magic constants.

* ports/nrf: Adding base support for nrfx module logging. Adding option to disable logging of UART as it might log its own setup over UART while the peripheral is not yet set up. Logging of UART could make sense if other transport of log is used.

* ports/nrf: updating nrfx_log.h with more correct parenthisis on macro grouping.

* ports/nrf: Updating nrfx logging with configuration to disable logging of UART module. The pattern can be used to turn off other modules as well. However, for now UART is the only module locking itself by logging before the peripheral is configured. Logging is turned off by default, can be enabled in nrfx_config.h by setting NRFX_LOG_ENABLED=1.

* ports/nrf/modules/random: Updating modrandom to use nrfx hal for rng. Not using nrfx-driver for this peripheral as its blocking mode would do the trick on RNG. Moving softdevice aware code from legacy hal to modrandom.c.

* nrf: Enable Peripheral Resource Sharing.

This enables TWI and SPI to be enabled at the same time.

* nrf/Makefile: Define MCU sub variant (e.g. NRF51822/NRF51422)

* nrf: Port TIMER peripheral to nrfx HAL.

* nrf/modules/machine/uart: Optimize UART module

For a nRF51, this results in a size reduction of:
.text: -68 bytes
.data: -56 bytes

* nrf/modules/machine/uart: Don't use magic index numbers.

* nrf/modules/machine/uart: Fix off-by-one error.

For nrf51:
.text: -40 bytes

* nrf/modules/machine/rtcounter: Update for nrfx HAL.

* nrf/modules/machine/i2c: Reduce RAM consumption.

Reductions for the nrf51:
flash: -108 bytes
RAM:   -72 bytes

* nrf/mpconfigport: Avoid unnecessary root pointers.

This saves 92 bytes of RAM.

* nrf: Support SoftDevice with nrfx HAL.

* nrf: Add NVMC peripheral (microbitfs) support.

There is no support yet for a SoftDevice.

It also fixes a potentially serious bug in start_index generation.

* nrf/modules/machine/spi: Optimize SPI peripheral.

nrf51:
text: -340 bytes
data: -72  bytes

nrf52:
text: -352 bytes
data: -108 bytes

* nrf/modules/random: Forgot to commit header file.

* nrf: Make nrfx_config.h universal for all boards.

* nrf: Use SoftDevice API for flash access when built for SD

* nrf/drivers/bluetooth: Remove legacy HAL driver includes.

These were not used anymore so can be removed.

* ports/nrf/microbit: Port microbit targets to nrfx HAL

Initial port of microbit modules to use nrfx HAL layer.
Tested display/image and modmusic on micro:bit to verify that
softpwm and ticker for nrf51 is working as expected.

Changing IRQ priority on timer to priority 2, as 1 might collide if
used side by side of SD110 BLE stack.

The patch reserves Timer1 peripheral compile time. This is not ideal
and should be resolved in seperate task.

* nrf/boards/microbit: Remove custom nrfx_config.h from microbit target, adding disablement of timer1 if softpwm is enabled.

* nrf/adc: Update ADC module to use nrfx

* nrf/modules/machine/pwm: Updating machine PWM module to use nrfx HAL driver.

examples/nrf52_pwm.py and examples/nrf52_servo.py tested on pca10040.

* nrf: Removing hal folder and boards nrf5x_hal_conf.h headers.

* nrf/nrfx_glue: Adding direct NVIC access for S110 BLE stack

If SoftDevice s110 has not yet been initialized, the IRQ will not be forwarded to
the application using the sd_nvic* function calls. Hence, direct access to cmsi
nvic functions are used instead if SoftDevice is not enabled.

* nrf/drivers/ticker: Setting IRQ priority 3 on Timer1

SoftDevice fails to initilize if Timer1 has been configured to priority
level 2 before enabling the SD. The timer is set to priority 1, higher than BLE
stack in order to provide better quality of music rendering when used with the
music module. This might be too high, time will show.

* nrf/examples: Updating ubluepy_temp after moving RTCounter to nrfx.

* nrf: delete duplicate files from device folder which can be located in nrfx/mdk.

* nrf/Makefile: Fetch system files from nrfx.

Testing on each device sub-variant to figure out which system file to
use. Reason for this is that nrf52.c is actually defining nrf52832.

Removing NRF_DEFINES parameter setting the device in use into the
same sub-variant test, as NRF52 is unique to nrf52832 when using nrfx.
Without this exclusion of -DNRF52 in compilation for nrf52840, the
device will be interpreted as a nrf52, hence nrf52832.

Also, changing name on variable SRC_NRF_HAL to SRC_NRFX_HAL to
explicitly tell the origin of the file.

* nrf: Updating device #ifdefs to be more open to non-nrf51 targets.

* nrf/modules/machine/uart: Removing second instance of UART for nrf52840 as it only has one non-DMA variant.

* nrf/device: Removing system files as these are now used from nrfx/mdk

* nrf: Moving startup files in device one level up as there is no need for deep hierarchy.

* nrf: Use NRF52_SERIES defined in nrfx/mdk/nrf.h as define value when testing for both nrf52(832) and nrf52840 variants.

* nrf/modules/machine/uart: Enable UART RX by default

Enable rx by default after intiialization of the peripheral.
Else, the nrfx driver will re-enable rx for each byte read
on uart REPL, clearing the EVENT_RXDRDY before second byte,
which again will make second byte get lost and read will get stuck.

This happens if the bytes are transmitted nrf(51) while still
processing the previous byte. Not seen on nrf52, but should
also become an issue at higher speeds.

This patch sets rx to always be enabled. Hence, not clearing the event
between read bytes, and it will be able to detect next byte recieved
upon finishing the first.

* nrf/modules/machine/timer: Fixing defines excluding Timer1 if ticker/softpwm is used.

* nrf: Switching import form mpconfigboard.h to mpconfigport.h in nrfx_config.h as mpconfigboard.h might define default values for defines not set by board specific header.

* nrf/modules/machine/i2c: nrfx integration fixes

Increasing speed to 400K.

Returning Address NACK's as MP error code; MP_ENODEV.

Returning MP_ETIMEOUT on all other error codes from TWI nrfx driver
except the ANACK.

Enabling and disabling the TWI peripheral before and after each transaction.

* nrf/examples: Updating ssd1306_mod.py to split framebuffer transfer into multiple chunks

* nrf/modules/machine/i2c: Return MP_EIO error if Data NACK occurs.

* nrf: Addressing review comments.

* nrf: Updating git submodule and users to nrfx v1.0.0.

* nrf/modules/machine/adc: Update adc module to follow v1.0.0 nrfx API.

* nrf/modules/machine/spi: Implement init and deinit functions

Extending SPI objects with a config member such that
configuration can be kept between new() and init().

Moving initialization done in new() to common init
function shared between the module functions.

If SPI is already configured, the SPI peripheral will
be uninitialized before initalized again.

Adding logic to handle initialization of polarity and
phase. As well, updating default speed to 1M from 500K.

* nrf/modules/machine: Removing unused nrfx includes in machine module header files
2018-07-18 17:12:26 +10:00
Ayke van Laethem
3cdecf90e6 nrf: Make LTO configurable via Makefile flag.
LTO messes up debuggability and may cause some other issues.
Additionally, it does not always result in reduced code size.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
c486127378 nrf: Improve include of boardmodules.mk
Removing shell commands for checking if boardmodules.mk exists
under boards/<BOARD>/modules folder before including it.

This patch does the equivalent to previous test without using
shell commands. Hence, including the .mk if it exists.

Reference:
https://stackoverflow.com/questions/8346118/check-if-a-makefile-exists-before-including-it
2018-07-18 17:12:25 +10:00
kaasasolut
c1cd7e5155 nrf: Only search for frozen files if FROZEN_MPY_DIR is set 2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
9e090a8783 nrf/boards/microbit: Add framework updates to build micro:bit modules.
Makefile and mpconfigport.h update is generic, and could be used by other
boards to give extra modules which are only for a selected board.
2018-07-18 17:12:25 +10:00
Ayke van Laethem
a248db6916 nrf: Option to enable Ctrl-C in NUS console.
Costs 136 bytes on a nRF51822.
2018-07-18 17:12:25 +10:00
Ayke van Laethem
03b8429c0c nrf: Remove default FROZEN_MPY_DIR.
Saves 448 bytes of flash. Can still be enabled using:

    make FROZEN_MPY_DIR=freeze BOARD=foo
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
2b32333f90 nrf: Use micropython libm to save flash
Using libm from micropython free up about 5.5kb flash on nrf52
targets which have floating point enabled.
2018-07-18 17:12:25 +10:00
Ayke
f7facf73f1 nrf: Add micro:bit filesystem.
* ports/nrf: Add micro:bit filesystem.

This filesystem has been copied from BBC micro:bit sources [1] and
modified to work with the nRF5x port.

[1]: https://github.com/bbcmicrobit/micropython/blob/master/source/microbit/filesystem.c

* ports/nrf/modules/uos: Make listdir() and ilistdir() consistent.

This removes the optional direcotry paramter from ilistdir(). This is
not consistent with VFS, but makes more sense when using only the
microbit filesystem.

Saves about 100 bytes.

* ports/nrf/modules/uos: Add code size comment.
2018-07-18 17:12:25 +10:00
Ayke van Laethem
cc158f98fe nrf: Implement NVMC HAL.
This is only a library for flash access. Actual file system support will
be added later.
2018-07-18 17:12:25 +10:00
Ayke van Laethem
4838b398af nrf: Enable Link-time optimizations 2018-07-18 17:12:25 +10:00
Ayke van Laethem
38afc6553c nrf: Use --gc-sections to reduce code size
This saves about 6-7kB.
2018-07-18 17:12:25 +10:00