Commit Graph

10002 Commits

Author SHA1 Message Date
Damien George
d82f344f61 esp32/machine_hw_spi: Use separate DMA channels for HSPI and VSPI.
Otherwise only one of HSPI or VSPI can be used at a time.  Fixes
issue #4068.
2019-01-23 23:40:06 +11:00
Matt Trentini
cd52d2c691 esp32/modules/neopixel.py: Change NeoPixel to different default timings.
In order to suit the more common 800KHz by default (instead of 400KHz), and
also have the same behaviour as the esp8266 port.

Resolves #4396.

Note! This is a breaking change. Anyone that has previously used the
NeoPixel class on an ESP32 board may be affected.
2019-01-23 14:22:38 +11:00
Damien George
18d3a5df26 esp8266/esp_mphal: Provide mp_hal_pin_od_high_dht so DHT works reliably.
The original behaviour of open-drain-high was to use the open-drain mode of
the GPIO pin, and this seems to make driving a DHT more reliable.  See
issue #4233.
2019-01-22 00:26:04 +11:00
Damien George
f102ac54e9 drivers/dht: Allow open-drain-high call to be DHT specific if needed.
Some ports (eg esp8266) need to have specific behaviour for driving a DHT
reliably.
2019-01-22 00:23:05 +11:00
Damien George
eb446ec227 esp32/Makefile: Use system provided math library rather than uPy one.
The ESP IDF system already provides a math library, and that one is likely
to be better tuned to the Xtensa architecture.  The IDF components are also
tested against its own math library, so best not to override it.  Using the
system provided library also allows to easily switch to double-precision
floating point by changing MICROPY_FLOAT_IMPL to MICROPY_FLOAT_IMPL_DOUBLE.
2019-01-17 16:43:20 +11:00
Damien George
90f86a0197 esp32/machine_pin: Add Pin.off() and Pin.on() methods. 2019-01-16 17:33:56 +11:00
Damien George
36808d4e6a esp8266/main: Activate UART(0) on dupterm for REPL before boot.py runs.
So that the user can explicitly deactivate UART(0) if needed.  See
issue #4314.

This introduces some risk to "brick" the device, if the user disables the
REPL without providing an alternative REPL (eg WebREPL), or any way to
reenable it.  In such a case the device needs to be erased and
reprogrammed.  This seems unavoidable, given the desire to have the option
to use the UART for something other than the REPL.
2019-01-16 17:24:23 +11:00
stijn
5064df2074 docs/differences: Clarify the differences are against Python 3.4. 2019-01-11 12:11:02 +11:00
Damien George
3431ea7205 stm32/main: Make thread and FS state static and exclude when not needed.
Without the static qualifier these objects will be kept by the linker even
if they are unused.  So this patch saves some RAM when these features are
unused by a board.
2019-01-11 01:52:17 +11:00
Damien George
5b66c7b712 stm32/wdt: Make singleton WDT object const so it goes in ROM. 2019-01-11 01:51:57 +11:00
Damien George
529dcce2be py/modio: Make iobase_singleton object const so it goes in ROM. 2019-01-10 23:08:07 +11:00
Damien George
f350b640a0 esp32/modsocket: For socket read only release GIL if socket would block.
If there are many short reads to a socket in a row (eg by readline) then
releasing and acquiring the GIL each time will give very poor throughput.
So first poll the socket to see if it has data, and if it does then don't
release the GIL.
2019-01-10 15:46:44 +11:00
Damien George
efe0569c26 esp32/mphalport: When tx'ing to REPL only release GIL if many chars sent
Otherwise, if multiple threads are active, printing data to the REPL may be
very slow because in some cases only one character is output per call to
mp_hal_stdout_tx_strn.
2019-01-10 15:43:47 +11:00
Damien George
afecc124e6 py: Fix location of VM returned exception in invalid opcode and comments
The location for a returned exception was changed to state[0] in
d95947b48a
2019-01-04 17:22:40 +11:00
Damien George
6d19934463 py: Get optional VM stack overflow check compiling and working again.
Changes to the layout of the bytecode header meant that this debug code was
no longer compiling.  This is now fixed and a new compile-time option is
introduced, MICROPY_DEBUG_VM_STACK_OVERFLOW, to turn on this feature (which
is disabled by default).  This option is needed because more than one file
needs to cooperate to make this check work.
2019-01-04 17:09:41 +11:00
Damien George
b33f108cde stm32/sdcard: Properly reset SD periph when SDMMC2 is used on H7 MCUs. 2018-12-30 01:28:34 +11:00
Dave Hylands
c932639063 tools/pydfu.py: Fix regression so tool runs under Python 2 again.
Under python3 (tested with 3.6.7) bytes with a list of integers as an
argument returns a different result than under python 2.7 (tested with
2.7.15rc1) which causes pydfu.py to fail when run under 2.7.  Changing
bytes to bytearray makes pydfu work properly under both Python 2.7 and
Python 3.6.
2018-12-30 01:20:48 +11:00
roland
4d8504425a stm32/modmachine: Fix reset_cause to correctly give DEEPSLEEP on L4 MCU.
Before this fix it returned SOFT_RESET after waking from a deepsleep
(standby).
2018-12-30 01:11:25 +11:00
Damien George
f334816df0 stm32/uart: Make sure user IRQs are handled even with a keyboard intr. 2018-12-30 01:03:22 +11:00
Damien George
7bdbea9a0c stm32/uart: Clear overrun error flag after reading RX data register.
On MCUs other than F4 the ORE (overrun error) flag needs to be cleared
independently of clearing RXNE, even though both are wired to trigger the
same RXNE IRQ.  In the case that an overrun occurred it's necessary to
explicitly clear the ORE flag or else the RXNE interrupt will keep firing.
2018-12-30 00:59:16 +11:00
Damien George
0d860fdcd0 stm32/uart: Always enable global UART IRQ handler on init.
Otherwise IRQs may not be enabled for the user UART.irq() handler.  In
particular this fixes the user IRQ_RXIDLE interrupt so that it triggers
even when there is no RX buffer.
2018-12-29 22:44:41 +11:00
Damien George
a5f7a3022d stm32/uart: Fix uart_rx_any in case of no buffer to return 0 or 1. 2018-12-29 22:43:35 +11:00
Tobias Badertscher
372e7a4dc6 stm32: Implement UART.irq() method with initial support for RX idle IRQ. 2018-12-29 17:21:37 +11:00
Tobias Badertscher
06236bf28e lib/utils: Add generic MicroPython IRQ helper functions.
Initial implementation of this is taken from the cc3200 port.
2018-12-29 17:08:55 +11:00
Damien George
fa50047bbc py/runtime: Unlock the GIL in mp_deinit function.
This mirrors what is done in mp_init.  Some RTOSs require this symmetry to
get back to a clean state (when doing a soft reset, for example).
2018-12-27 14:20:31 +11:00
Damien George
7cd59c5bc3 py/mpconfig: Move MICROPY_VERSION macros to static ones in mpconfig.h.
It's more robust to have the version defined statically in a header file,
rather than dynamically generating it via git using a git tag.  In case
git doesn't exist, or a different source control tool is used, it's
important to still have the uPy version number available.
2018-12-22 01:40:38 +11:00
Andrew Leech
ce0c581179 stm32/main: Add board config option to enable/disable mounting SD card.
The new option MICROPY_HW_SDCARD_MOUNT_AT_BOOT can now be defined to 0 in
mpconfigboard.h to allow SD hardware to be enabled but not auto-mounted at
boot.  This feature is enabled by default to retain previous behaviour.

Previously, if an SD card is enabled in hardware it is also used to boot
from.  While this can be disabled with a SKIPSD file on internal flash,
this wont be available at first boot or if the internal flash gets
corrupted.
2018-12-22 01:30:47 +11:00
Paul Sokolovsky
5ed578e5b4 py/gc: Adjust gc_alloc() signature to be able to accept multiple flags.
The older "bool has_finaliser" gets recast as GC_ALLOC_FLAG_HAS_FINALISER=1
so this is a backwards compatible change to the signature.  Since bool gets
implicitly converted to 1 this patch doesn't include conversion of all
calls.
2018-12-20 17:52:16 +11:00
Paul Sokolovsky
a261d8b615 py/objarray: Introduce "memview_offset" alias for "free" field of object
Both mp_type_array and mp_type_memoryview use the same object structure,
mp_obj_array_t, but for the case of memoryview, some fields, e.g. "free",
have different meaning.  As the "free" field is also a bitfield, assume
that (anonymous) union can't be used here (for the concerns of possible
compatibility issues with wide array of toolchains), and just add a field
alias using a #define.  As it's a define, it should be a selective
identifier, so use verbose "memview_offset" to avoid any clashes.
2018-12-20 17:40:48 +11:00
Dave Hylands
39eef27083 tools/mpy-tool.py: Fix build error when no qstrs present in frozen mpy.
If you happen to only have a really simple frozen file that doesn't contain
any new qstrs then the generated frozen_mpy.c file contains an empty
enumeration which causes a C compile time error.
2018-12-15 14:36:08 +11:00
Damien George
0d165fec9c py/qstr: Put a lower bound on new qstr pool allocation. 2018-12-15 14:32:09 +11:00
Damien George
0c46419323 windows: Remove remaining traces of old GNU readline support.
GNU readline support for the unix port was removed in
acaa30b604 and in
5e83a75c78, so it's also no longer supported
in the windows port.
2018-12-15 13:54:55 +11:00
Damien George
5146e79490 stm32/boards/NUCLEO_L432KC: Specify L4 OpenOCD config file for this MCU. 2018-12-13 13:45:16 +11:00
Damien George
59f409a787 stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
To support deplop-openocd on target boards that use TEXT0_ADDR only and
have their firmware in a single binary image.
2018-12-13 13:43:10 +11:00
Paul Sokolovsky
d4d4bc5827 tests/basics/special_methods2: Typo fix in comment. 2018-12-13 01:29:01 +11:00
Damien George
814d580a15 tools/mpy-tool.py: Fix calc of opcode size for opcodes with map caching.
Following an equivalent fix to py/bc.c.  The reason the incorrect values
for the opcode constants were not previously causing a bug is because they
were never being used: these opcodes always have qstr arguments so the part
of the code that was comparing them would never be reached.

Thanks to @malinah for finding the problem and providing the initial patch.
2018-12-13 01:26:55 +11:00
Damien George
6bf8ecfe3a py/bc: Fix calculation of opcode size for opcodes with map caching.
All 4 opcodes that can have caching bytes also have qstrs, so the test for
them must go in the qstr part of the code.  The reason this incorrect
calculation of the opcode size did not lead to a bug is because the caching
byte is at the end of the opcode (byte, qstr, qstr, cache) and is always
0x00 when saving/loading, so was just treated as a single byte no-op
opcode.  Hence these opcodes were being saved/loaded/decoded correctly.

Thanks to @malinah for finding the problem and providing the initial patch.
2018-12-13 01:26:55 +11:00
Paul Sokolovsky
fbb8335084 py/objdict: Make .fromkeys() method configurable.
On by default, turned off for minimal/bare-arm. Saves 144 bytes on x86.
2018-12-13 01:20:55 +11:00
Paul Sokolovsky
169b152f29 docs/ure: Fully describe supported syntax subset, add example. 2018-12-13 01:16:30 +11:00
Damien George
1db55381b6 stm32/adc: Support 16-bit ADC configuration on H7 MCUs. 2018-12-12 12:51:46 +11:00
Damien George
6cab8daee0 stm32/adc: Increase ADC sampling time for internal sources on H7 MCUs. 2018-12-12 12:51:26 +11:00
Damien George
0555ada277 stm32/adc: Fix calibrated volt/temp readings on H7 by using 16bit scale. 2018-12-12 12:50:37 +11:00
Damien George
1b4031ed64 stm32/extint: Use correct EXTI channels on H7 MCUs for RTC events. 2018-12-12 12:49:23 +11:00
Glenn Ruben Bakke
9e5768a6db nrf/bluetooth: Update BLE stack download script.
Due to new webpages at nordicsemi.com, the download links
for Bluetooth LE stacks were broken.

This patch updates the links to new locations for the current
targets.
2018-12-10 20:42:06 +01:00
Damien George
beeeec292b docs/README: Remove references to MICROPY_PORT when building docs.
The docs are now built as one for all ports.
2018-12-11 02:55:22 +11:00
Damien George
025d419a77 teensy: Add own uart.h to not rely on stm32's version of the file. 2018-12-10 23:55:11 +11:00
Damien George
dc23978dde stm32/uart: Add ability to have a static built-in UART object.
A static UART is useful for internal peripherals that require a UART and
need to persist outside the soft-reset loop.
2018-12-10 16:21:50 +11:00
Damien George
61ef031687 stm32/uart: Move config of char_width/char_mask to uart.c. 2018-12-10 16:21:50 +11:00
Damien George
6ea45277bf stm32/uart: For UART init, pass in params directly, not via HAL struct.
To provide a cleaner and more abstract C-level interface to the UART.
2018-12-10 16:21:50 +11:00
Damien George
e0c2432503 stm32/uart: Simplify deinit of UART, no need to call HAL.
The HAL just clears UE and then clears all the UART control registers.
2018-12-10 16:21:50 +11:00