Commit Graph

48 Commits

Author SHA1 Message Date
Paul Sokolovsky
eac22e29a5 all: Consistently update signatures of .make_new and .call methods.
Otherwise, they serve reoccurring source of copy-paste mistakes and
breaking nanbox build.
2017-01-04 16:10:42 +03:00
Damien George
304cfda8c4 py/stream: Move ad-hoc ioctl constants to stream.h and rename them.
The constants MP_IOCTL_POLL_xxx, which were stmhal-specific, are moved
from stmhal/pybioctl.h (now deleted) to py/stream.h.  And they are renamed
to MP_STREAM_POLL_xxx to be consistent with other such constants.

All uses of these constants have been updated.
2016-12-02 16:37:29 +11:00
Paul Sokolovsky
59a1201da9 all: Remove readall() method, which is equivalent to read() w/o args.
Its addition was due to an early exploration on how to add CPython-like
stream interface. It's clear that it's not needed and just takes up
bytes in all ports.
2016-11-14 00:24:22 +03:00
Damien George
50ddaafa6a cc3200: Use mp_raise_XXX helper functions to reduce code size.
Reduces code size by 632 bytes.
2016-10-18 09:53:43 +11:00
Paul Sokolovsky
07209f8592 all: Rename mp_obj_type_t::stream_p to protocol.
It's now used for more than just stream protocol (e.g. pin protocol), so
don't use false names.
2016-06-18 18:44:57 +03:00
Damien George
5b3f0b7f39 py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*.
The first argument to the type.make_new method is naturally a uPy type,
and all uses of this argument cast it directly to a pointer to a type
structure.  So it makes sense to just have it a pointer to a type from
the very beginning (and a const pointer at that).  This patch makes
such a change, and removes all unnecessary casting to/from mp_obj_t.
2016-01-11 00:49:27 +00:00
Damien George
731f359292 all: Add py/mphal.h and use it in all ports.
py/mphal.h contains declarations for generic mp_hal_XXX functions, such
as stdio and delay/ticks, which ports should provide definitions for.  A
port will also provide mphalport.h with further HAL declarations.
2015-10-31 19:14:30 +03:00
danicampora
075ca64521 cc3200: Fix UART tests after correcting uart.read() behaviour. 2015-10-21 15:30:57 +02:00
danicampora
7ff585333e cc3200: uart.read() returns EGAIN if no chars available. 2015-10-21 15:30:56 +02:00
danicampora
4542643025 docs: Update all WiPy docs to reflect the new API. 2015-10-17 23:29:04 +02:00
Daniel Campora
c92e6a45eb cc3200: Rename pyb module to machine. 2015-09-27 16:50:27 +02:00
Daniel Campora
ef369249cb cc3200: Implement support for os.dupterm(). 2015-09-27 11:27:24 +02:00
Daniel Campora
57fa14b5be cc3200: New WLAN API including test. 2015-09-27 01:50:52 +02:00
Daniel Campora
dbdcb58d64 cc3200: New irq API, affects all classes that provide the irq method. 2015-09-27 01:48:20 +02:00
Daniel Campora
dffa9f6da6 cc3200: New SD and RTC API plus os and time modules' extensions. 2015-09-21 22:30:32 +02:00
Daniel Campora
aba75e1233 cc3200: New SPI API. 2015-09-16 10:10:33 +02:00
Daniel Campora
8332044f75 cc3200: Add UART.ODD and UART.EVEN to select parity. 2015-09-16 10:10:26 +02:00
Daniel Campora
7d6b6f6681 cc3200: Make UART choose default id when not given. 2015-09-16 10:10:13 +02:00
Daniel Campora
f352fe82a5 tests/wipy: Add I2C tests. 2015-09-10 08:00:59 +02:00
Daniel Campora
359b4e9ed9 cc3200: Refactor pin af assigment functions. 2015-09-10 08:00:24 +02:00
Daniel Campora
4d7fa05b43 cc3200: Improve Pin and UART implementation.
Deassign pins af before assigning. Make uart.any() return the
correct value everytime, this requires interrupts to be always
enabled.
2015-09-10 08:00:12 +02:00
Daniel Campora
f91f212d9f cc3200: New UART API plus related test. 2015-09-10 07:59:47 +02:00
Daniel Campora
ea5061e409 cc3200: Improve callback API.
Rename "wakes" param to "wake_from" and make "value" an object
instead of an integer.
2015-08-16 20:17:52 +02:00
Daniel Campora
fa655ce196 cc3200: Improve interrupt handling and fix bug in HAL_Delay(). 2015-07-07 16:11:05 +02:00
Daniel Campora
3319780e96 cc3200: Add sendbreak method to the UART. 2015-06-10 23:35:35 +02:00
Daniel Campora
8a6d93aeed cc3200: Make UART API more similar to stmhal. 2015-06-10 23:35:33 +02:00
Daniel Campora
fabe79f7af cc3200: Clean up exception handling. 2015-05-26 12:29:20 +02:00
Daniel Campora
124aa000af cc3200: Use polarity and phase instead of submode in the SPI construct. 2015-05-26 11:30:48 +02:00
Daniel Campora
2dd47239de cc3200: Make API more similar to stmhal.
In general the changes are:

1. Peripheral (UART, SPI, ADC, I2C, Timer) IDs start from 1, not zero.
2. Make I2C and SPI require the ID even when there's only one bus.
3. Make I2C and SPI accept 'mode' parameter even though only MASTER
   is supported.
2015-05-25 21:47:19 +02:00
Daniel Campora
8e611e8414 cc3200: Add Timer module. Supports free running, PWM and capture modes. 2015-05-17 12:34:49 +02:00
Daniel Campora
9466e154b4 cc3200: Fix power mode param check in the UART callback constructor. 2015-05-17 12:26:40 +02:00
Damien George
7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Daniel Campora
4be44014ab cc3200: Reenable active interrupts when waking from suspended mode. 2015-03-26 13:58:58 +01:00
Daniel Campora
2d717ad97a cc3200: Add callback support to the UART for RX interrupts. 2015-03-26 10:28:43 +01:00
danicampora
6de1b39368 cc3200: Make peripheral objects static.
This prevents duplication of objects in the sleep list. Also helps
with reducing the code size by ~100 bytes.
2015-03-17 13:26:07 +01:00
danicampora
ea43fa104e cc3200: Remove unneeded functions and add pybsleep_remove() calls. 2015-03-17 13:26:03 +01:00
danicampora
9e44383e3f cc3200: Add power management framework. Add mpcallback class.
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
danicampora
d226dd2f59 cc3200: Add preliminary low power deep sleep support. 2015-03-11 16:54:09 +01:00
danicampora
379a3fa305 cc3200: Change UART.print() to make it consistent with the rest. 2015-02-23 15:02:55 +01:00
danicampora
7102e51506 cc3200: Add UART __del__ method. 2015-02-21 22:27:44 +01:00
Damien George
4a23a01945 cc3200: Add explicit py/ path-prefix for py includes.
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
danicampora
6b21c3fdd6 cc3200: Refactor UART and I2C object creation.
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
danicampora
7807da20ab cc3200: Increase UART default read buffer size to 128 bytes. 2015-02-20 16:41:49 +01:00
danicampora
e1dfc44178 cc3200: Disable FreeRTOS asserts. Optimize more files if BTYPE=debug. 2015-02-20 16:40:06 +01:00
danicampora
99f3f6b5de cc3200: Add I2C module. Only master mode is currently supported. 2015-02-13 17:54:04 +01:00
Damien George
0b32e50365 stmhal: Make pybstdio usable by other ports, and use it.
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
danicampora
53716fcc3e cc3200: Rename GPIO module to Pin.
This change helps making the cc3200 port API a bit closer to stmhal.
The ramaining differences are due to the specific hardware details
of each chip. One feature that has been deliberately disabled is the
possibility to add custom names and custom pin mappings. Those
features are nice and convenient, but in this port, code size is a
major concern.
2015-02-09 20:01:54 +01:00
danicampora
8785645a95 cc3200: Add cc3200 port of MicroPython.
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00