Commit Graph

103 Commits

Author SHA1 Message Date
Jim Mussared
9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
robert-hh
cc0249c936 nrf/modules/machine/uart: Implement uart.flush() and uart.txdone().
Since uart.write() of the nrf port waits until all bytes but the last
one have been sent, uart.flush() and uart.txdone() are implemented
as empty functions to provide API consistency.

uart.flush()

flush() will always return immediately, even if the last byte
may still be sent.

ret = uart.txdone()

uart.txdone() will always return True, even if the last byte
may still be sent.
2022-08-31 00:18:40 +10:00
Jim Mussared
8a0ee5a5c0 py/objstr: Split mp_obj_str_from_vstr into bytes/str versions.
Previously the desired output type was specified.  Now make the type part
of the function name.  Because this function is used in a few places this
saves code size due to smaller call-site.

This makes `mp_obj_new_str_type_from_vstr` a private function of objstr.c
(which is almost the only place where the output type isn't a compile-time
constant).

This saves ~140 bytes on PYBV11.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:43:55 +10:00
Damien George
787bd99919 nrf/modules/ubluepy: Use mp_obj_str_get_data to extract str data.
Instead of GET_STR_DATA_LEN, which is intended to be a private macro.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-11 23:18:02 +10:00
David Lechner
8a69c54211 nrf: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers for the nrf port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
robert-hh
60539ea162 nrf/drivers/usb: Probe for interrupt char in USB CDC task.
And ensure that the input queue is empty when scheduling the interrupt.
2022-07-17 00:11:14 +10:00
iabdalkader
6753c53318 nrf/modmachine: Add machine.idle() function.
This improves the compatibility of the nrf port machine module with common
drivers, by adding a machine.idle() alias for lightsleep.
2022-07-08 12:37:59 +10:00
iabdalkader
d8f5669532 nrf/modmachine: Add machine.bootloader() and make it customisable. 2022-06-17 13:37:44 +10:00
iabdalkader
99d3a73d59 nrf/modules/uos/microbitfs: Fix MICROPY_MBFS build to use mp_obj_malloc.
Changes introduced in 0e7bfc88c6 missed
changing this call to mp_obj_malloc.
2022-06-11 21:09:58 +10:00
Damien George
efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George
5956466c0e py/builtin: Clean up and simplify import_stat and builtin_open config.
The following changes are made:

- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
  automatically used for mp_import_stat and mp_builtin_open respectively.

- If MICROPY_PY_IO is enabled then "open" is automatically included in the
  set of builtins, and points to mp_builtin_open_obj.

This helps to clean up and simplify the most common port configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Jim Mussared
f67ac90fa9 nrf: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared
4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared
0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Andrew Leech
303e222f70 nrf/modules: Include uasyncio in default board manifest. 2022-03-30 15:37:49 +11:00
Damien George
fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Glenn Ruben Bakke
77b4cfcbc9 nrf/modules/nrf: Add function to enable/disable DCDC.
This function can be used to enable and disable the DC/DC converter with or
without the Bluetooth stack enabled.  It can also be used to query the
current state of the DC/DC.

This commit also adds a definition of ARRAY_SIZE needed by nrfx HAL-layer.
2021-08-09 14:55:59 +10:00
Damien George
e5e0553224 nrf/modules/uos: Add ilistdir to uos module.
This was missed in the initial implementation of the uos module.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
aa857eb65e nrf/Makefile: Set default manifest file for all targets.
Set the default manifest to "modules/manifest.py".  This includes files
from the folder "modules/scripts".  The manifest default value is overriden
by all nrf51 boards that have SoftDevice present (SD=s110) to save flash.

Also add "modules/manifest.py" which is set to freeze
"modules/scripts/_mkfs.py".
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
7b6ad0ce2e nrf/modules/scripts: Add file system formatting script.
Add a helper script _mkfs.py which automatically formats the file system if
nrf.Flash() is located and a VFS file system has been included in the
compilation.

The precedence is: first LFS1, LFS2 then FAT.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
7a833edf37 nrf/modules/uos: Allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2. 2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
127cec8cae nrf/modules/nrf: Add new nrf module with flash block device.
This commit adds the "nrf" module for port specific modules and objects.
Included in it is the "Flash" object which exposes a block device
implementation to access internal SoC flash.

Thanks to @aykevl aka Ayke van Laethem for the initial implementation.
2021-08-08 23:09:26 +10:00
David P
d3f6ce7dc3 nrf/modules: Replace master/slave with controller/peripheral in SPI.
Also remove mistaken usage of MASTER/SLAVE constants in comments.
2021-07-18 11:23:41 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
David Lechner
ca920f7218 py/mpstate: Make exceptions thread-local.
This moves mp_pending_exception from mp_state_vm_t to mp_state_thread_t.
This allows exceptions to be scheduled on a specific thread.

Signed-off-by: David Lechner <david@pybricks.com>
2021-06-19 09:43:44 +10:00
Bruno Martins
94fb5e7f5a nrf: Add machine.memXX, and allow boards to customise some features. 2021-05-18 12:01:51 +10:00
Damien George
e9e9c76ddf all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
To match mp_sched_exception() and mp_sched_schedule().

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George
64180f0742 extmod/machine_i2c: Add init protocol method for generic I2C bindings.
Hardware I2C implementations must provide a .init() protocol method if they
want to support reconfiguration.  Otherwise the default is that i2c.init()
raises an OSError (currently the case for all ports).

mp_machine_soft_i2c_locals_dict is renamed to mp_machine_i2c_locals_dict to
match the generic SPI bindings.

Fixes issue #6623 (where calling .init() on a HW I2C would crash).

Signed-off-by: Damien George <damien@micropython.org>
2020-11-23 19:45:04 +11:00
Damien George
71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
27e117307d nrf: Remove unnecessary includes of mpconfigport.h and its header guard.
The mpconfigport.h file is an internal header and should only ever be
included once by mpconfig.h.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-09 00:13:34 +10:00
Martin Fischer
15574cd665 nrf: Add support for time.ticks_xxx functions using RTC1.
This commit adds time.ticks_ms/us support using RTC1 as the timebase.  It
also adds the time.ticks_add/diff helper functions.  This feature can be
enabled using MICROPY_PY_TIME_TICKS.  If disabled the system uses the
legacy sleep methods and does not have any ticks functions.

In addition support for MICROPY_EVENT_POLL_HOOK was added to the
time.sleep_ms(x) function, making this function more power efficient and
allows support for select.poll/asyncio.  To support this, the RTC's CCR0
was used to schedule a ~1msec event to wakeup the CPU.

Some important notes about the RTC timebase:

- Since the granularity of RTC1's ticks are approx 30usec, time.ticks_us is
not perfect, does not have 1us resolution, but is otherwise quite usable.
For tighter measurments the ticker's 1MHz counter should be used.

- time.ticks_ms(x) should *not* be called in an IRQ with higher prio than
the RTC overflow irq (3).  If so it introduces a race condition and
possibly leads to wrong tick calculations.

See #6171 and #6202.
2020-07-08 23:47:02 +10:00
Jim Mussared
e7f8c7d9a3 nrf: Update to work with nrfx v2.0.0, to match TinyUSB.
Commit 6cea369b89 updated the TinyUSB
submodule to a version based on nrfx v2.0.0.  This commit updates the nrf
port to work with the latest TinyUSB and nrfx v2.0.0.
2020-05-15 15:06:02 +10:00
stijn
d6243568a0 all: Remove commented-out include statements. 2020-04-23 11:24:15 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
ac8383a95d nrf: Use MICROPY_HW_ENABLE_RNG instead of MICROPY_PY_RANDOM_HW_RNG.
The "random" module no longer uses the hardware RNG (the extmod version of
this module has a pseudo-random number generator), so the config option
MICROPY_PY_RANDOM_HW_RNG is no longer meaningful.  This commit replaces it
with MICROPY_HW_ENABLE_RNG, which controls whether the hardware RNG is
included in the build.
2020-02-18 12:43:16 +11:00
Damien George
6ad3bb1e12 nrf: Remove custom "random" module and use extmod version instead.
Hardware RNG code is moved to drivers/rng.[ch].
2020-02-18 12:43:16 +11:00
Damien George
ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Damien George
97eca38c4f py: Add mp_raise_type helper macro and use it where appropriate.
This provides a more consistent C-level API to raise exceptions, ie moving
away from nlr_raise towards mp_raise_XXX.  It also reduces code size by a
small amount on some ports.
2020-02-13 11:03:37 +11:00
Yonatan Goldschmidt
61d2b40ad5 lib/utils/pyexec: Introduce MICROPY_REPL_INFO, wrap debug prints in it.
For the 3 ports that already make use of this feature (stm32, nrf and
teensy) this doesn't make any difference, it just allows to disable it from
now on.

For other ports that use pyexec, this decreases code size because the debug
printing code is dead (it can't be enabled) but the compiler can't deduce
that, so code is still emitted.
2019-12-28 00:05:39 +11:00
Glenn Ruben Bakke
82fe6b0526 nrf: Add nrf9160 base support.
This patch add basic building blocks for nrf9P60.

It also includes a secure bootloader which forwards all
possible peripherals that are user selectable to become
non-secure. After configuring Flash, RAM and peripherals
the secure bootloader will jump to the non-secure domain
where MicroPython is placed.

The minimum size of a secure boot has to be a flash
block of 32Kb, hence why the linker scripts are
offsetting the main application this much.

The RAM offset is set to 128K, to allow for later
integration of Nordic Semiconductor's BSD socket
library which reserves the range 0x20010000 - 0x2001FFFF.
2019-10-10 21:35:27 +02:00
roland van straten
226399bcef nrf/led: Expose public API for LED manipulation.
Aligned implementation with the STM32 port.
Added empty functions to be used when no LED is available.
2019-10-02 22:09:43 +02:00
Glenn Ruben Bakke
c561ae61a1 nrf/uart: Add support for UARTE (EasyDMA). 2019-10-02 21:20:56 +02:00
Glenn Ruben Bakke
02a8c31eef nrf/temp: Move module configuration guard.
This patch moves the check for MICROPY_PY_MACHINE_TEMP to come
before the inclusion of nrf_temp.h. The nrf_temp.h depends on
the NRF_TEMP_Type which might not be defined for all nRF devices.
2019-10-02 21:15:48 +02:00
Glenn Ruben Bakke
d2e730b727 nrf/i2c: Add support for TWIM (EasyDMA). 2019-10-02 20:42:06 +02:00
Jim Mussared
353ed7705f nrf/boards/make-pins.py: Fix gen of board pins to use correct index.
It was previously not taking into account that the list of pins was sparse,
so using the wrong index.  The boards/X/pins.csv was generating the wrong
data for machine.Pin.board.

As part of this fix rename the variables to make it more clear what the
list contains (only board pins).
2019-09-05 22:52:24 +10:00
Damien George
9e90e2528b nrf/machine/adc: Fix mapping of ADC channel to pin. 2019-09-05 22:13:04 +10:00