Commit Graph

37 Commits

Author SHA1 Message Date
robert-hh
ac1e31267b samd/boards: Rework the pins.csv files.
Changes are:
- Remove the LED_Pxxx definitions from pins.csv, now that the LED class is
  gone.
- Remove the '-' lines.
- Add default lines for USB and SWCLK, SWDIO.
2022-10-25 23:40:28 +11:00
robert-hh
a6760bd4ef samd/modmachine: Replace the LED class by the Signal class.
It simplifies and improves the code.  The LED_Pxxx lines of the board.csv
lines can still be used, but will be taken as Pin definitions.
2022-10-25 23:39:41 +11:00
robert-hh
e5cf3fab95 samd/machine_pin: Change the pin handling and naming/numbering.
Pin numbers are now the MCU port numbers in the range:

    PA0..PA31:  0..31
    PB0..PB31: 32..63
    PC0..PC31: 64..95
    PD0..PD31: 96..127

Pins can be denoted by the GPIO port number, the name as defined in
pins.csv or a string in the form Pxnn, like "PA16" or "PD03".

The pins.c and pins.h files are now obsolete.  The pin objects are part of
the AF table.

As result of a simplification, the code now supports using pin names or
numbers instead of pin objects for modules like UART, SPI, PWM, I2C, ADC,
pininfo.
2022-10-25 23:34:07 +11:00
robert-hh
e7aa9700ca samd/boards/SEEED_WIO_TERMINAL: Declare more pins for SEEED WIO board.
Defining all pins from the external 40 Pin connector, and some internal
pins like the one for SD and LCD.
2022-10-25 23:28:34 +11:00
robert-hh
f0399d35e4 samd/modmachine: Get the bootloader magic address from the lib.
Instead of being hard-coded, and then it works for all MCUs.

That fits except for a Sparkfun SAMD51 Thing Plus (known) bug, which uses
192k - 4 as magic address.  Therefore, that address is set as well to avoid
a problem when this bug is fixed by Sparkfun.
2022-10-25 23:09:04 +11:00
robert-hh
0d3f0d7470 samd/boards/SPARKFUN_SAMD51_THING_PLUS: Add board files for Thing Plus.
That device uses an SAMD51J20 MCU with 256k RAM and 1024k flash.
2022-10-25 22:42:17 +11:00
robert-hh
366c801b35 samd/machine_pin: Change the printing of Pin and LED objects.
It now prints lines like:

    Pin("D9", mode=IN, pull=PULL_UP, GPIO=PA07)

or

    LED("LED")

showing for consistency the names as given in pins.csv.  For pins, the GPIO
numer is printed as well for a reference.
2022-10-06 23:14:21 +11:00
robert-hh
65f99e371d samd/boards: Use the same linker file for all SAMD51x19 variants. 2022-10-06 23:14:21 +11:00
robert-hh
9f4df86016 samd/boards: Move the flash filesystem definitions to the linker files.
They used to be in mpconfigmcu.h, but have to be different for different
chip variants, like the SAMD51x20.
2022-10-06 23:14:08 +11:00
robert-hh
85fb8b8b02 samd/pin_af: Simplify the pin-af-table handling.
Changes are:
- The pin-af-table-SAMDxx.csv file are moved to the mcu directories with
  the name as pin-af-table.csv.
- The handling in Makefile and pin_af.c is simplified.
2022-10-06 23:05:46 +11:00
robert-hh
20e7313453 samd/clock_config: Add HW_DFLL_USB_SYNC and HW_MCU_OSC32KULP extensions.
Two new compile flags are:

MICROPY_HW_DFLL_USB_SYNC: Effective only if DFLL48 does not run from the
crystal.  It will synchronize the DFLL48M clock with the USB's SOF pulse.
If no USB is connected, it will fall back to open loop mode.  The DFLL48M
clock is then pretty precise, but with a higher clock jitter at SAMD51
devices.

MICROPY_HW_MCU_OSC32KULP: Effective only if the devics uses a crystal as
clock source.  Run the MCU clock from the ULP 32kHz oszillator instead of
the crystal.  This flag was added to cater for a interference problem of
the crystal and Neopixel/Debug pins at Adafruit FEATHER Mx boards, which
causes the board to crash.  Drawback: ticks_ms() and time.time() vs. than
ticks_us() and the peripherals like PWM run at not synchronous clocks.
2022-10-06 23:03:08 +11:00
robert-hh
a9304af8fa samd/boards: Add missing/lost board config and pin definitions.
Fixes are:
- Pin definitions for ADAFRUIT_FEATHER_Mx_EXPRESS and
  ADAFRUIT_ITSYBITSY_M4_EXPRESS.
- For ADAFRUIT_ITSYBITSY_M0_EXPRESS, change the MISO/MOSI name.
- For MINISAM_M4, add the default SPI pins.
- For boards with 32k crystal, add the XOSC32K setting.
2022-10-06 22:58:09 +11:00
robert-hh
aa6dbbcffd samd/mcu: Factor out MCU policy for SAMD21 and SAMD51.
Which contains a mpconfigmcu.h, mpconfigmcu.mk and manifest.py file for
each MCU group.  That looks better than the previous choice.
2022-10-06 22:56:13 +11:00
robert-hh
32c973d554 samd/machine_timer: Add machine.Timer based on the shared soft-timer. 2022-10-06 22:52:39 +11:00
robert-hh
45bf25a002 samd/moduos: Add uos.urandom() for SAMD51.
Based on the hardware RNG.
2022-10-06 22:50:29 +11:00
robert-hh
6c037af086 samd/boards: Create pin_af_table.c from pin_af_table_SAMDxx.csv files.
This step just creates the table.  The firmware cannot be built at this
commit.  The next commit will complete the pin-af mechanism.
2022-10-06 22:38:45 +11:00
robert-hh
e8615f5813 samd/machine_pin: Allow specifying a pin or LED by its name as a string.
The names are defined in pins.csv.
2022-10-06 22:37:46 +11:00
robert-hh
949a808076 samd/boards: Add ADAFRUIT_FEATHER_M4_EXPRESS and _ITSYBITSY_M0_EXPRESS.
These two boards are used for testing, so it is favorable to have them
added early.

The full test set is:
- ADAFRUIT_FEATHER_M4_EXPRESS: SAMD51 with 32kHz crystal.
- ADAFRUIT_ITSYBITSY_M0_EXPRESS: SAMD21 without crystal.
- ADAFRUIT_ITSYBITSY_M4_EXPRESS: SAMD51 without crystal.
- SEEED_XIAO: SAM21 with 32kHz crystal.
2022-10-06 22:32:01 +11:00
robert-hh
a5d5ecbf84 samd/boards: Move mcu-specific settings into a mpconfig_samdXX.h file.
Located at the boards directory. That way, the mpconfigboard.h files are
almost empty, just setting the board name and the MCU name.
2022-10-06 22:30:37 +11:00
robert-hh
0420799a84 samd/boards: Replace pins.c and pins.h by pins.csv.
The files pins.c and pins.h are generated during the build process from
pins.csv, using a make-pins.py script.
2022-10-06 22:29:49 +11:00
robert-hh
85afed569d samd: Remove the existing provisional support for REPL on UART.
It was only partially working and will be rpelaced later by a full
machine.UART class implementation.
2022-10-06 22:29:06 +11:00
Damien George
5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Peter van der Burg
b991902983 samd/boards/SEEED_XIAO: Add new board definition. 2021-11-19 11:48:25 +11:00
Peter van der Burg
ef4e63aabc samd/boards/SEEED_WIO_TERMINAL: Add new board definition. 2021-11-19 11:48:12 +11:00
Peter van der Burg
771d673e5c samd/boards/SAMD21_XPLAINED_PRO: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:47:43 +11:00
Peter van der Burg
fb79e58636 samd/boards/ADAFRUIT_TRINKET_M0: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:47:19 +11:00
Peter van der Burg
3d33dbedc9 samd/boards/MINISAM_M4: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:46:53 +11:00
Peter van der Burg
199b6a8a8b samd/boards/ADAFRUIT_ITSYBITSY_M4_EXPRESS: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:46:30 +11:00
Peter van der Burg
72cb4ff596 samd/boards/ADAFRUIT_FEATHER_M0_EXPRESS: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:44:07 +11:00
Peter van der Burg
cd2223b8fe samd: Integrate latest asf4, add help, more time funcs and uPy features.
- Makefile: update to use new ASF4 files, support frozen manifest, and
  include source files in upcoming commits
- boards/manifest.py: add files to freeze
- boards/samd51p19a.ld: add linker script for this MCU
- help.c: add custom help text
- main.c: execute _boot.py, boot.py and main.py on start-up
- modules/_boot.py: startup file to freeze
- modutime.c: add gmtime, localtime, mktime, time functions
- mpconfigport.h: enabled more features for sys and io and modules
- mphalport.h: add mp_hal_pin_xxx macros
- mphalport.c: add mp_hal_stdio_poll
2021-11-19 11:05:05 +11:00
Mike Causer
7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
roland van straten
fe3c064d42 samd: Add minimum config for Atmel SAMD21-XPLAINED-PRO board. 2019-08-20 21:30:36 +10:00
Jim Mussared
eb7eed5d92 samd/boards: Add Mini SAM M4 board configuration. 2019-08-16 00:28:30 +10:00
Jim Mussared
90188cc92b samd/boards: Add Adafruit Feather M0 Express board configuration. 2019-08-16 00:28:12 +10:00
Jim Mussared
a5d85d306c samd: Make common linker scripts, rename board.mk to mpconfigboard.mk.
The rename matches other ports, e.g. stm32, and gives consistency with
mpconfigboard.h.
2019-08-16 00:26:54 +10:00
Damien George
5f9bd11527 samd: Add new port to Microchip SAMDxx microcontrollers.
Initially supporting SAMD21 and SAMD51.
2019-07-01 17:19:18 +10:00