Commit Graph

19 Commits

Author SHA1 Message Date
Damien George
aa0cf873bf stm32/uart: Support low baudrates on LPUART1.
By selecting a larger prescaler when needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-26 13:53:50 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Chris Mason
9d674cf7ab stm32/uart: Add support for LPUART1 on L0, L4, H7 and WB MCUs.
Add LPUART1 as a standard UART.  No low power features are supported, yet.
LPUART1 is enabled as the next available UART after the standard U(S)ARTs:

    STM32WB:      LPUART1 = UART(2)
    STM32L0:      LPUART1 = UART(6)
    STM32L4:      LPUART1 = UART(6)
    STM32H7:      LPUART1 = UART(9)

On all ports: LPUART1 = machine.UART('LP1')

LPUART1 is enabled by defining MICROPY_HW_LPUART1_TX and
MICROPY_HW_LPUART1_RX in mpconfigboard.h.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2021-02-21 15:49:32 +11:00
Damien George
d2a34c62e7 stm32/uart: Add uart_set_baudrate function.
This allows changing the baudrate of the UART without reinitialising it
(reinitialising can lead to spurious characters sent on the TX line).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-14 18:30:49 +11:00
Jim Mussared
23109988c2 stm32/uart: Allow static IRQ handler registration.
This will allow the HCI UART to use a non-heap mp_irq_obj_t, which avoids
needing to make a root pointer for it.
2020-09-08 10:46:30 +10:00
Damien George
73e8b7e0e4 stm32: Update components to work with new H7xx HAL. 2019-07-03 23:40:49 +10:00
Chris Mason
1b956ec817 stm32: Add support for F413 MCUs.
Includes:
- Support for CAN3.
- Support for UART9 and UART10.
- stm32f413xg.ld and stm32f413xh.ld linker scripts.
- stm32f413_af.csv alternate function mapping.
- startup_stm32f413xx.s because F413 has different interrupt vector table.
- Memory configuration with: 240K filesystem, 240K heap, 16K stack.
2019-05-02 16:26:53 +10:00
Damien George
0d860fdcd0 stm32/uart: Always enable global UART IRQ handler on init.
Otherwise IRQs may not be enabled for the user UART.irq() handler.  In
particular this fixes the user IRQ_RXIDLE interrupt so that it triggers
even when there is no RX buffer.
2018-12-29 22:44:41 +11:00
Tobias Badertscher
372e7a4dc6 stm32: Implement UART.irq() method with initial support for RX idle IRQ. 2018-12-29 17:21:37 +11:00
Damien George
dc23978dde stm32/uart: Add ability to have a static built-in UART object.
A static UART is useful for internal peripherals that require a UART and
need to persist outside the soft-reset loop.
2018-12-10 16:21:50 +11:00
Damien George
6ea45277bf stm32/uart: For UART init, pass in params directly, not via HAL struct.
To provide a cleaner and more abstract C-level interface to the UART.
2018-12-10 16:21:50 +11:00
Damien George
bc3f0dddac stm32/uart: Remove HAL's UART_HandleTypeDef from UART object struct.
This UART_HandleTypeDef is quite large (around 70 bytes in RAM needed for
each UART object) and is not needed: instead the state of the peripheral
held in its registers provides all the required information.
2018-12-10 16:21:50 +11:00
Damien George
7d7f59d78b stm32/uart: Factor out code to set RX buffer to function uart_set_rxbuf. 2018-12-10 16:21:50 +11:00
Damien George
524e13b006 stm32/uart: Factor out code from machine_uart.c that computes baudrate. 2018-12-10 16:21:50 +11:00
Damien George
a2271532be stm32: Split out UART Python bindings from uart.c to machine_uart.c. 2018-12-10 16:21:50 +11:00
Damien George
a60efa8202 stm32/uart: Allow ctrl-C to work with UARTs put on REPL via os.dupterm. 2018-04-23 20:44:30 +10:00
Damien George
d966a33486 stm32: Change header include guards from STMHAL to STM32 to match dir. 2018-02-15 15:47:04 +11:00
Damien George
0eb333e3cf stm32/mphalport: Improve efficiency of mp_hal_stdout_tx_strn_cooked.
Also simplifies the code by removing the specialised (and inefficient)
cooked functions from UART and USB_VCP.
2017-10-19 14:15:32 +11:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00