mirrors/micropython
1
0
Fork 0
mirror of https://github.com/licsber/micropython.git synced 2024-09-20 17:10:24 +08:00
Code Issues Packages Projects Releases Wiki Activity
8,878 Commits 1 Branch 0 Tags 65 MiB
d1c4bd69df
Commit Graph

140 Commits

Author SHA1 Message Date
Damien George
d1c4bd69df stm32/storage: Remove all SPI-flash bdev cfg, to be provided per board. 
If a board wants to use SPI flash for storage then it must now provide the
configuration itself, using the MICROPY_HW_BDEV_xxx macros.
 2018-03-10 00:59:43 +11:00
Damien George
1803e8ef22 stm32/storage: Make spi_bdev interface take a data pointer as first arg. 
This allows a board to have multiple instances of the SPI block device.
 2018-03-10 00:59:43 +11:00
Damien George
1e4caf0b1e stm32/storage: Merge all misc block-dev funcs into a single ioctl func. 
It makes it cleaner, and simpler to support multiple different block
devices.  It also allows to easily extend a given block device with new
ioctl operations.
 2018-03-10 00:59:43 +11:00
Damien George
a739b35a96 drivers/memory/spiflash: Change to use low-level SPI object not uPy one. 
This patch alters the SPI-flash memory driver so that it uses the new
low-level C SPI protocol (from drivers/bus/spi.h) instead of the uPy SPI
protocol (from extmod/machine_spi.h).  This allows the SPI-flash driver to
be used independently from the uPy runtime.
 2018-03-10 00:59:43 +11:00
Damien George
58ebeca6a9 drivers/bus: Pull out software SPI implementation to dedicated driver. 
This patch takes the software SPI implementation from extmod/machine_spi.c
and moves it to a dedicated file in drivers/bus/softspi.c.  This allows the
SPI driver to be used independently of the uPy runtime, making it a more
general component.
 2018-03-10 00:59:43 +11:00
iabdalkader
ad2a6e538c stm32/system_stm32: Fix CONFIG_RCC_CR_2ND value to use bitwise or. 2018-03-09 23:37:09 +11:00
Tom Collins
993f4345c0 stm32/usbd_conf.h: Add include of stdint.h to fix compilation issues. 2018-03-09 16:08:08 +11:00
Damien George
eb56efb434 stm32: Remove startup_stm32.S, now provided in boards/ for each MCU. 2018-03-09 15:14:24 +11:00
iabdalkader
66748aaf60 stm32/Makefile: Use separate startup file for each MCU series. 2018-03-09 15:14:17 +11:00
iabdalkader
88157715db stm32/boards: Add startup_stm32l4.s for L4 series specific startup. 2018-03-09 15:14:10 +11:00
iabdalkader
e3b81f5712 stm32/boards: Add startup_stm32f4.s for F4 series specific startup. 2018-03-09 15:14:03 +11:00
iabdalkader
d84f1a90cc stm32/boards: Add startup_stm32f7.s for F7 series specific startup. 2018-03-09 15:13:56 +11:00
iabdalkader
0f5cce7753 stm32/boards: Add startup_stm32h7.s for H7 series specific startup. 2018-03-09 15:13:13 +11:00
iabdalkader
bbf19bb64e stm32/main: Enable D2 SRAM1/2/3 clocks on H7 MCUs. 2018-03-09 15:12:58 +11:00
iabdalkader
61d463ad07 stm32/mpconfigboard_common: Add STM32H7 common configuration. 2018-03-09 15:12:44 +11:00
iabdalkader
6d3f42f713 stm32/extint: Add EXTI support for H7 MCUs. 2018-03-09 15:12:34 +11:00
iabdalkader
711f817c2a stm32/rtc: Add RTC support for H7 MCUs. 2018-03-09 15:12:29 +11:00
iabdalkader
0e51e4d139 stm32/dma: Add DMA support for H7 MCUs. 2018-03-09 15:12:19 +11:00
iabdalkader
fe29419c10 stm32/stm32_it: Add support for H7 MCUs. 2018-03-09 15:12:01 +11:00
iabdalkader
2858e0aef8 stm32/usbd_conf: Add USB support for H7 MCUs. 2018-03-09 15:11:22 +11:00
iabdalkader
d151adb791 stm32/modmachine: Support basic H7 MCU features. 2018-03-09 15:10:53 +11:00
iabdalkader
0989e0cdff stm32/timer: Add Timer support for H7 MCUs. 2018-03-09 15:10:46 +11:00
iabdalkader
b982b95c18 stm32/uart: Add UART support for H7 MCUs. 2018-03-09 15:10:39 +11:00
iabdalkader
a863c60439 stm32/wdt: Add WDT support for H7 MCUs. 2018-03-09 15:10:31 +11:00
iabdalkader
3f86fbcb07 stm32/mphalport: Use GPIO BSRRL/BSRRH registers for H7 MCUs. 2018-03-09 15:10:10 +11:00
iabdalkader
2e93d4167d stm32/system_stm32: Add H7 MCU system initialisation. 2018-03-09 15:09:56 +11:00
iabdalkader
81f8f5f163 stm32/flash: Add flash support for H7 MCUs. 2018-03-09 15:09:49 +11:00
iabdalkader
b8d09b9bef stm32/Makefile: Add settings to support H7 MCUs. 2018-03-09 15:09:29 +11:00
iabdalkader
fabfacf3d7 stm32/boards: Add new NUCLEO_H743ZI board configuration files. 
USB serial and mass storage works, and the REPL is also available via the
UART through the on-board ST-LINK.
 2018-03-09 15:08:11 +11:00
Damien George
8522874167 stm32/boards: Add stm32h743.ld linker script. 2018-03-09 15:08:11 +11:00
Damien George
a3c721772e stm32/boards: Add stm32h743_af.csv file describing H7 GPIO alt funcs. 2018-03-09 14:06:34 +11:00
sec2
250b24fe36 stm32/boards/NUCLEO_F767ZI: Update pins list to include 3 extra pins. 2018-03-07 18:53:02 +11:00
sec2
bda3620616 stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list. 2018-03-07 18:40:06 +11:00
Damien George
024edafea0 stm32/i2c: On F4 MCUs report the actual I2C SCL frequency. 2018-03-07 14:59:03 +11:00
Damien George
adda38cf76 stm32/qspi: Add hardware QSPI driver, with memory-map capability. 
It supports the abstract QSPI protocol defined in drivers/bus/qspi.h.
 2018-03-03 00:17:08 +11:00
Damien George
8bd0a51ca9 stm32/spibdev: Convert to use multiple block read/write interface. 
The spiflash driver now supports read/write of multiple blocks at a time.
 2018-03-03 00:13:15 +11:00
Damien George
861080aa3d stm32/storage: Add option for bdev to supply readblock/writeblocks. 
If the underlying block device supports it, it's more efficient to
read/write multiple blocks at once.
 2018-03-02 23:57:53 +11:00
Damien George
0210383da5 stm32/spibdev: Add option to configure SPI block dev to use QSPI flash. 
To use QSPI (in software QSPI mode) the configuration needed is:

    #define MICROPY_HW_SPIFLASH_SIZE_BITS (n * 1024 * 1024)
    #define MICROPY_HW_SPIFLASH_CS      (pin_x1)
    #define MICROPY_HW_SPIFLASH_SCK     (pin_x2)
    #define MICROPY_HW_SPIFLASH_IO0     (pin_x3)
    #define MICROPY_HW_SPIFLASH_IO1     (pin_x4)
    #define MICROPY_HW_SPIFLASH_IO2     (pin_x5)
    #define MICROPY_HW_SPIFLASH_IO3     (pin_x6)
 2018-03-02 23:55:45 +11:00
Damien George
a0dfc38641 stm32/spibdev: Update to work with new spiflash driver. 2018-03-02 23:55:40 +11:00
Damien George
989fc16162 stm32: Move MCU-specific cfg from mphalport.h to mpconfigboard_common.h. 
It's cleaner to have all the MCU-specific configuration in one location,
not least to help with adding support for a new MCU series.
 2018-02-23 16:54:07 +11:00
Damien George
ea05b400df stm32/flash: Use FLASH_TYPEPROGRAM_WORD to support newer HALs. 2018-02-23 16:30:47 +11:00
Damien George
e6220618ce stm32: Use "GEN" for describing files generated in the build. 
Instead of "Create", to match the build output from the py/ core.
 2018-02-23 16:27:30 +11:00
Damien George
60b0982bb2 stm32: Add board config option to enable/disable the ADC. 
The new option is MICROPY_HW_ENABLE_ADC and is enabled by default.
 2018-02-22 14:22:45 +11:00
Damien George
82828340a0 ports: Enable ucollections.deque on relevant ports. 
These ports are all capable of running uasyncio.
 2018-02-21 22:55:13 +11:00
Damien George
d966a33486 stm32: Change header include guards from STMHAL to STM32 to match dir. 2018-02-15 15:47:04 +11:00
Damien George
fa13e0d35b stm32: Factor out flash and SPI block-device code to separate files. 
Prior to this patch, storage.c was a combination of code that handled
either internal flash or external SPI flash and exposed one of them as a
block device for the local storage.  It was also exposed to the USB MSC.

This patch splits out the flash and SPI code to separate files, which each
provide a general block-device interface (at the C level).  Then storage.c
just picks one of them to use as the local storage medium.  The aim of this
factoring is to allow to add new block devices in the future and allow for
easier configurability.
 2018-02-13 22:21:46 +11:00
Damien George
34911f1a57 stm32/boards: Update all boards to work with new USB configuration. 2018-02-13 18:57:01 +11:00
Damien George
5c320bd0b0 stm32: Introduce MICROPY_HW_ENABLE_USB and clean up USB config. 
This patch allows to completely compile-out support for USB, and no-USB is
now the default.  If a board wants to enable USB it should define:

    #define MICROPY_HW_ENABLE_USB (1)

And then one or more of the following to select the USB PHY:

    #define MICROPY_HW_USB_FS (1)
    #define MICROPY_HW_USB_HS (1)
    #define MICROPY_HW_USB_HS_IN_FS (1)
 2018-02-13 18:51:08 +11:00
Damien George
8aad22fdca stm32/timer: Support MCUs that don't have TIM4 and/or TIM5. 2018-02-13 15:53:39 +11:00
Damien George
6e91ab5806 stm32/spi: Further updates to use newer versions of HAL names. 2018-02-13 15:53:08 +11:00