Commit Graph

6 Commits

Author SHA1 Message Date
Krzysztof Adamski
37d01d4be3 rp2/machine_rtc: Add initial support for RTC.
Initial support for machine.RTC on rp2 port. It only supports datetime()
method and nothing else. The method gets/returns a tuple of 8 items, just
like esp32 port, for example, but the usec parameter is ignored as the RP2
RTC only works up to seconds precision.

The Pico RTC isn't very useful as the time is lost during reset and there
seems to be no way to easily power up just the RTC clock with a low current
voltage, but still there seems to be use-cases for that, see issues #6831,
and a Thonny issue #1592. It was also requested for inclusion on v1.15
roadmap on #6832.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
2021-06-12 23:02:54 +10:00
Damien George
dcaf702578 rp2/modmachine: Enable machine.Signal class.
Fixes issue #6863.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 00:19:04 +11:00
robert-hh
c675452566 rp2/modmachine: Re-init UART for REPL on frequency change.
When UART is used for REPL and the MCU frequency is changed, the UART
has to be re-initialised.  Besides that the UART may have to be recreated
after a frequency change, but with USB REPL this is not a problem.

Thanks to @HermannSW for spotting and providing the change.
2021-03-12 00:49:30 +11:00
robert-hh
11cf742524 rp2/modmachine: Allow changing CPU clock frequency.
Using the standard machine.freq().

The safe ranges tested were 10 and 12-270MHz, at which USB REPL still
worked.  Requested settings can be checked with the script:
pico-sdk/src/rp2_common/hardware_clocks/scripts/vcocalc.py.  At frequencies
like 300MHz the script still signaled OK, but USB did not work any more.
2021-03-12 00:48:46 +11:00
Damien George
195e7dfa06 rp2/modmachine: Implement additional functions incl unique_id and idle.
Added functions in the machine module are:
- unique_id (returns 8 bytes)
- soft_reset
- idle
- lightsleep, deepsleep (not power saving at the moment)
- disable_irq, enable_irq
- time_pulse_us

Signed-off-by: Damien George <damien@micropython.org>
2021-02-02 22:14:22 +11:00
Damien George
469345e728 rp2: Add new port to Raspberry Pi RP2 microcontroller.
This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040
microcontroller.

The build system uses pure cmake (with a small Makefile wrapper for
convenience).  The USB driver is TinyUSB, and there is a machine module
with most of the standard classes implemented.  Some examples are provided
in the examples/rp2/ directory.

Work done in collaboration with Graham Sanderson.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-30 00:42:29 +11:00