Commit Graph

81 Commits

Author SHA1 Message Date
Damien George
93509ac8c7 stm32: Add configuration to build in nanbox mode.
Most stm32 boards can now be built in nan-boxing mode via:

    $ make NANBOX=1

Note that if float is enabled then it will be forced to double-precision.
Also, native emitters will be disabled.
2019-12-27 22:54:53 +11:00
Damien George
c2eaf56634 stm32/Makefile: Enable max buffer size on W5200 NIC when used with lwIP.
Because in network_wiznet5k the TX/RX buffers are set to 16k each when in
MACRAW mode, which is used with lwIP.
2019-12-13 12:36:12 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
6a64b280d0 stm32: Add support for RF coprocessor on WB55 MCUs.
This requires a BLE wireless stack firmware to be already programmed in the
secure flash area of the device.
2019-11-01 14:52:17 +11:00
Damien George
48b25a841b stm32: Add machine.Timer with soft timer implementation.
This commit adds an implementation of machine.Timer backed by the soft
timer mechanism.  It allows an arbitrary number of timers with 1ms
resolution, with an associated Python callback.  The Python-level API
matches existing ports that have a soft timer, and is used as:

    from machine import Timer
    t = Timer(freq=10, callback=lambda t:print(t))
    ...
    t = Timer(mode=Timer.ONE_SHOT, period=2000, callback=lambda t:print(t))
    ...
    t.deinit()
2019-10-31 22:12:55 +11:00
Damien George
a5d97f1db9 stm32: Add soft timer implementation, using SysTick at 1ms resolution.
This commit adds an implementation of a "software timer" with a 1ms
resolution, using SysTick.  It allows unlimited number of concurrent
timers (limited only by memory needed for each timer entry).  They can be
one-shot or periodic, and associated with a Python callback.

There is a very small overhead added to the SysTick IRQ, which could be
further optimised in the future, eg by patching SysTick_Handler code
dynamically.
2019-10-31 22:12:55 +11:00
Jim Mussared
ece4e21a55 stm32/Makefile: Only enable hardware sqrt on parts that support it.
Not enough to detect f7/h7, need to use the specific parts.

Follow-up to 580a2656d1.
2019-10-28 15:08:28 +11:00
Damien George
287800d6e1 stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed, frozen files are now referenced via
boards/manifest.py.
2019-10-15 21:36:24 +11:00
Damien George
d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Jim Mussared
580a2656d1 stm32: Use hardware double sqrt on F7/H7 MCUs.
Identical to cd527bb324 but for doubles.
This gives a -2.754% improvement on bm_float.py, and -35% improvement on
calling sqrt in a loop.
2019-10-10 17:39:32 +11:00
Jim Mussared
902bb4ceae stm32: Extract port-specific Nimble implementation.
On other ports (e.g. ESP32) they provide a complete Nimble implementation
(i.e. we don't need to use the code in extmod/nimble). This change
extracts out the bits that we don't need to use in other ports:
 - malloc/free/realloc for Nimble memory.
 - pendsv poll handler
 - depowering the cywbt

Also cleans up the root pointer management.
2019-10-08 14:40:35 +11:00
Jim Mussared
6f35f214d3 stm32/mpconfigport.h: Add modbluetooth module to stm32. 2019-10-01 09:51:02 +10:00
Jim Mussared
d72dbb822c stm32: Provide port-specific implementation for Nimble on STM32. 2019-10-01 09:51:02 +10:00
iabdalkader
f7a07b3605 stm32: Add support for FDCAN peripheral, exposed as pyb.CAN.
The new fdcan.c file provides the low-level C interface to the FDCAN
peripheral, and pyb_can.c is updated to support both traditional CAN and
FDCAN, depending on the MCU being compiled for.
2019-09-23 17:00:54 +10:00
Damien George
d06fd384c2 stm32/can: Factor CAN driver into low-level and Python bindings.
can.c now contains the low-level C interface to the CAN peripheral, and
pyb_can.c the Python-level class/methods/constants.
2019-09-23 16:58:08 +10:00
Damien George
ebacdfabb6 stm32/machine_adc: Add machine.ADC class. 2019-09-04 15:40:24 +10:00
Damien George
59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George
64aebca155 stm32/Makefile: Allow a board to disable float support.
By using "MICROPY_FLOAT_IMPL = none" in its mpconfigboard.mk file.
2019-07-16 14:47:32 +10:00
Damien George
4c1ad1f691 stm32: Add support for USB on L0 MCUs. 2019-07-16 14:45:53 +10:00
Damien George
5fd62c8992 stm32: Remove SystemInit funcs, use stm32lib versions instead.
stm32lib now provides system_stm32XXxx.c source files for all MCU variants,
which includes SystemInit and prescaler tables.  Since these are quite
standard and don't need to be changed, switch to use them instead of custom
variants, making the start-up code cleaner.

The SystemInit code in stm32lib was checked and is equivalent to what is
removed from the stm32 port in this commit.
2019-07-08 15:23:53 +10:00
Damien George
21ecf8be5f stm32/powerctrl: Move L0's SystemClock_Config to powerctrlboot.c file. 2019-07-08 15:23:53 +10:00
Damien George
23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George
6b6403ce76 stm32/Makefile: Use startup_stm32*.s file from stm32lib.
This means that each MCU now gets a unique IRQ table, eg a specific one for
STM32F405, STM32F411, etc rather than just STM32F4xx.
2019-07-03 23:42:36 +10:00
Damien George
241e577753 stm32/Makefile: Remove Wno-attributes for ll_usb HAL file.
This HAL file is now patched so it doesn't have these warnings.
2019-07-03 23:41:33 +10:00
Damien George
04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
Damien George
205c6d0dc9 stm32/Makefile: Print info messages about use of mboot/QSPI flash. 2019-06-24 21:59:58 +10:00
Damien George
38bcc99a58 stm32/usbd_msc: Provide Mode Sense response data in MSC interface.
Eventually these responses could be filled in by a function to make their
contents dynamic, depending on the attached logical units.  But for now
they are fixed, and this patch fixes the MODE SENSE(6) responses so it is
the correct length with the correct header.
2019-06-11 15:43:59 +10:00
Damien George
518aa571ab stm32/usbd_msc: Rework USBD MSC code to support multiple logical units.
SCSI can support multiple logical units over the one interface (in this
case over USBD MSC) and here the MSC code is reworked to support this
feature.  At this point only one LU is used and the behaviour is mostly
unchanged from before, except the INQUIRY result is different (it will
report "Flash" for both flash and SD card).
2019-06-11 15:43:15 +10:00
Damien George
fed4c23590 stm32: Integrate optional mbedTLS component for ussl module.
To use it a board should define MICROPY_PY_USSL=1 and MICROPY_SSL_MBEDTLS=1
at the Makefile level.  With the provided configuration it adds about 64k
to the build.
2019-06-05 15:37:31 +10:00
Damien George
8b7409c295 stm32: Integrate in the cyw43 driver and network.WLAN class.
Enable it by setting MICROPY_PY_NETWORK_CYW43=1 at the Makefile level.
2019-06-03 17:14:34 +10:00
Damien George
97753a1bbc stm32: Move factory reset files and code to separate source file.
The new function factory_reset_make_files() populates the given filesystem
with the default factory files.  It is defined with weak linkage so it can
be overridden by a board.

This commit also brings some minor user-facing changes:

- boot.py is now no longer created unconditionally if it doesn't exist, it
  is now only created when the filesystem is formatted and the other files
  are populated (so, before, if the user deleted boot.py it would be
  recreated at next boot; now it won't be).

- pybcdc.inf and README.txt are only created if the board has USB, because
  they only really make sense if the filesystem is exposed via USB.
2019-05-07 13:59:51 +10:00
Damien George
aa7b32c811 stm32/dac: Rework DAC driver to use direct register access.
This patch makes the DAC driver simpler and removes the need for the ST
HAL.  As part of it, new helper functions are added to the DMA driver,
which also use direct register access instead of the ST HAL.

Main changes to the DAC interface are:

- The DAC uPy object is no longer allocated dynamically on the heap,
  rather it's statically allocated and the same object is retrieved for
  subsequent uses of pyb.DAC(<id>).  This allows to access the DAC objects
  without resetting the DAC peripheral.  It also means that the DAC is only
  reset if explicitly passed initialisation parameters, like "bits" or
  "buffering".

- The DAC.noise() and DAC.triangle() methods now output a signal which is
  full scale (previously it was a fraction of the full output voltage).

- The DAC.write_timed() method is fixed so that it continues in the
  background when another peripheral (eg SPI) uses the DMA (previously the
  DAC would stop if another peripheral finished with the DMA and shut the
  DMA peripheral off completely).

Based on the above, the following backwards incompatibilities are
introduced:

- pyb.DAC(id) will now only reset the DAC the first time it is called,
  whereas previously each call to create a DAC object would reset the DAC.
  To get the old behaviour pass the bits parameter like: pyb.DAC(id, bits).

- DAC.noise() and DAC.triangle() are now full scale.  To get previous
  behaviour (to change the amplitude and offset) write to the DAC_CR (MAMP
  bits) and DAC_DHR12Rx registers manually.
2019-04-24 15:51:19 +10:00
Damien George
7ce2a08231 stm32: Add support for MMC driver, exposed via pyb.MMCard class.
Enable it via MICROPY_HW_ENABLE_MMCARD.
2019-04-01 17:04:43 +11:00
Boris Vinogradov
6947dff7da stm32/Makefile: Allow to override CROSS_COMPILE with included Makefile. 2019-03-29 11:34:05 +11:00
Damien George
c7d19dc0ad ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code. 2019-03-14 12:22:49 +11:00
Andrew Leech
89ff506513 py: Update and rework build system for including external C modules.
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
Damien George
b5f33ac2cb ports: Update to work with new oofatfs version. 2019-03-05 15:56:39 +11:00
Damien George
78fe979d7d stm32: Use global lwip build config and support building without lwip. 2019-03-04 23:33:02 +11:00
Damien George
c8bbf2c170 stm32/Makefile: Allow a board to specify its linker sections for FW.
A board can now use the make variables TEXT0_SECTIONS and TEXT1_SECTIONS to
specify the linker sections that should go in its firmware.  Defaults are
provided which give the existing behaviour.
2019-03-04 22:26:55 +11:00
Damien George
c55709bf29 stm32/network_lan: Add high-level network.LAN interface to ETH driver. 2019-02-26 23:32:19 +11:00
Damien George
c950a1a35d stm32/eth: Add low-level Ethernet MAC driver. 2019-02-26 23:32:19 +11:00
Damien George
7b2dc96251 stm32/boards/make-pins.py: Add cmdline options to support use by mboot. 2019-02-14 13:35:39 +11:00
Damien George
e6d97e8a0b stm32: Move gchelper assembler code to lib/utils for use by other ports. 2019-02-12 14:11:21 +11:00
Tobias Badertscher
372e7a4dc6 stm32: Implement UART.irq() method with initial support for RX idle IRQ. 2018-12-29 17:21:37 +11:00
Damien George
a2271532be stm32: Split out UART Python bindings from uart.c to machine_uart.c. 2018-12-10 16:21:50 +11:00
Damien George
dff14c740b stm32/powerctrl: Move function to set SYSCLK into new powerctrl file.
Power and clock control is low-level functionality and it makes sense to
have it in a dedicated file, at least so it can be reused by other parts of
the code.
2018-09-24 14:18:18 +10:00
Andrew Leech
84f4d58479 stm32/dcmi: Add F4/F7/H7 hal files and dma definitions for DCMI periph. 2018-09-21 12:12:49 +10:00
Damien George
56f275c0a2 stm32/Makefile: Include copysign.c in double precision float builds.
This is required for DEBUG=1 builds when MICROPY_FLOAT_IMPL=double.

Thanks to Andrew Leech.
2018-09-20 16:51:20 +10:00
Andrew Leech
17f7c683d2 stm32: Add support for STM32F765xx MCUs.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable.  When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
2018-09-20 15:16:03 +10:00
Damien George
47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.
MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.
2018-09-11 16:42:57 +10:00