Commit Graph

104 Commits

Author SHA1 Message Date
Damien George
e3ff52863b esp8266/modules/ntptime.py: Add comment about configuring NTP host.
The ability to change the host is a frequently requested feature, so
explicitly document how it can be achieved using the existing code.

See issues #2121, #4385, #4622, #5122, #5536.
2020-01-31 23:54:11 +11:00
JensDiemer
c14ff6194c esp8266/modules: Fix AttributeError in _boot.py if flash not formatted.
Prior to this commit, if the flash filesystem was not formatted then it
would error: "AttributeError: 'FlashBdev' object has no attribute 'mount'".
That is due to it not being able to detect the filesystem on the block
device and just trying to mount the block device directly.

This commit fixes the issue by just catching all exceptions.  Also it's not
needed to try the mount if `flashbdev.bdev` is None.
2020-01-14 23:53:49 +11:00
David Lechner
e79424d672 ports: Allow overriding CROSS_COMPILE in a custom makefile.
Many ports already allow overriding CROSS_COMPILE.  This modifies the
remaining ports to allow it as well.
2019-12-27 23:53:16 +11:00
Jim Mussared
7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Damien George
b47e155bd0 py/persistentcode: Add ability to relocate loaded native code.
Implements text, rodata and bss generalised relocations, as well as generic
qstr-object linking.  This allows importing dynamic native modules on all
supported architectures in a unified way.
2019-12-12 20:15:28 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
cea9209e0f esp8266/moduos: Add optional support for VfsLfs1 and VfsLfs2.
With this commit an esp8266-based board can now be built with littlefs
support via, eg "make MICROPY_VFS_LFS2=1".
2019-11-07 18:44:16 +11:00
Damien George
6eee5413ff esp8266/modules/flashbdev.py: Support extended block protocol. 2019-11-07 18:43:37 +11:00
Damien George
c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Damien George
cfe1c5abf8 extmod/vfs: Rename BP_IOCTL_xxx constants to MP_BLOCKDEV_IOCTL_xxx.
Also rename SEC_COUNT to BLOCK_COUNT and SEC_SIZE to BLOCK_SIZE.
2019-10-29 14:17:29 +11:00
Damien George
d2384efa80 py: Automatically provide weak links from "foo" to "ufoo" module name.
This commit implements automatic module weak links for all built-in
modules, by searching for "ufoo" in the built-in module list if "foo"
cannot be found.  This means that all modules named "ufoo" are always
available as "foo".  Also, a port can no longer add any other weak links,
which makes strict the definition of a weak link.

It saves some code size (about 100-200 bytes) on ports that previously had
lots of weak links.

Some changes from the previous behaviour:
- It doesn't intern the non-u module names (eg "foo" is not interned),
  which saves code size, but will mean that "import foo" creates a new qstr
  (namely "foo") in RAM (unless the importing module is frozen).
- help('modules') no longer lists non-u module names, only the u-variants;
  this reduces duplication in the help listing.

Weak links are effectively the same as having a set of symbolic links on
the filesystem that is searched last.  So an "import foo" will search
built-in modules first, then all paths in sys.path, then weak links last,
importing "ufoo" if it exists.  Thus a file called "foo.py" somewhere in
sys.path will still have precedence over the weak link of "foo" to "ufoo".

See issues: #1740, #4449, #5229, #5241.
2019-10-22 15:30:52 +11:00
Damien George
f1d91908fa esp8266/boards: Add manifest_release.py with files for a release.
A release also sets: UART_OS = -1
2019-10-22 00:23:22 +11:00
Jim Mussared
df7f632fd7 esp8266: Allow building without a manifest. 2019-10-21 23:21:14 +11:00
Jim Mussared
8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Damien George
2fd3f2520d esp8266: Convert to use FROZEN_MANIFEST to specify frozen code.
Removes symlinks in modules directory, all frozen code is now specified by
manifest.py.
2019-10-15 21:36:02 +11:00
Damien George
d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Damien George
79ab82ea77 esp8266/modules/ntptime.py: Always close socket, and set day-of-week.
Fixes issue #5189.
2019-10-10 18:05:56 +11:00
Mike Causer
53a9b45da1 esp8266: Add per-board configs, following other ports.
The specific board can be selected with the BOARD makefile variable.  This
defaults (if not specified) to BOARD=GENERIC, which is the original default
firmware build.  For the 512k target use BOARD=GENERIC_512K.
2019-10-10 16:32:25 +11:00
Damien George
0e72cc9029 esp8266/machine_adc: Add read_u16 method and refactor. 2019-09-05 22:13:04 +10:00
Damien George
625609a737 esp8266/machine_adc: Rename pyb_adc_* to machine_adc_*. 2019-09-04 16:17:10 +10:00
Damien George
060209240b esp8266: Put new profile code in iROM. 2019-08-30 16:49:02 +10:00
Damien George
96ace8082e esp8266/machine_uart: Allow remapping UART TX/RX pins from 1/3 to 15/13.
Via the standard tx/rx arguments: UART(0, 115200, tx=Pin(15), rx=Pin(13)).

Resolves issue #4718.
2019-08-21 21:16:40 +10:00
Damien George
2d3d4f7483 esp8266/mpconfigport.h: Enable lwIP raw sockets. 2019-08-06 15:56:05 +10:00
Damien George
ef00048fed extmod/modwebrepl: Add config option to put filebuf[512] on stack/bss.
Since the esp8266 has a small stack this buffer is kept in the BSS.
2019-07-03 12:55:57 +10:00
Damien George
89a23a05b3 esp8266: Provide custom machine_time_pulse_us that feeds soft WDT.
So that the timeout for machine.time_pulse_us() can be large.

Fixes issue #2775.
2019-07-01 22:53:00 +10:00
Damien George
c80614dfc8 ports: Provide mp_hal_stdio_poll for sys.stdio polling where needed. 2019-07-01 17:10:12 +10:00
Paul m. p. P
637aa9784d esp8266/uart: Fix invalid ringbuf name when event driven REPL enabled. 2019-06-17 12:34:10 +10:00
Damien George
5357dad52e esp8266: Fix ticks_ms to correctly handle wraparound of system counter.
Fixes issue #4795.
2019-05-24 15:37:34 +10:00
Paul Sokolovsky
016d9a40fe various: Add and update my copyright line based on git history.
For modules I initially created or made substantial contributions to.
2019-05-17 18:04:15 +10:00
Damien George
99a8fa7940 esp8266/modmachine: Handle overflow of timer to get longer periods.
Can now handle up to about 298 days maximum for millisecond periods.

Fixes issue #4664.
2019-05-10 15:50:35 +10:00
Damien George
0646e607b5 ports: Convert to use pyexec_file_if_exists() to execute boot/main.py.
The stm32 and nrf ports already had the behaviour that they would first
check if the script exists before executing it, and this patch makes all
other ports work the same way.  This helps when developing apps because
it's hard to tell (when unconditionally trying to execute the scripts) if
the resulting OSError at boot up comes from missing boot.py or main.py, or
from some other error.  And it's not really an error if these scripts don't
exist.
2019-04-26 15:22:14 +10:00
Damien George
c7d19dc0ad ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code. 2019-03-14 12:22:49 +11:00
Damien George
b5f33ac2cb ports: Update to work with new oofatfs version. 2019-03-05 15:56:39 +11:00
Damien George
8ce22662fe esp8266/modmachine: Call ets_event_poll after waiti in machine.idle.
Because "waiti 0" may have waited for a while (eg 500ms) and the internal
WDT may need to be fed immediately.

Fixes issue #4459.
2019-02-28 15:44:37 +11:00
Yonatan Goldschmidt
bc4f8b438b extmod/moduwebsocket: Refactor websocket to uwebsocket.
As mentioned in #4450, `websocket` was experimental with a single intended
user, `webrepl`. Therefore, we'll make this change without a weak
link `websocket` -> `uwebsocket`.
2019-02-14 00:35:45 +11:00
Mike Causer
812969d615 all: Change PYB message prefix to MPY.
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc.

Having a consistent prefix across ports reduces the difference between
ports, which is a general goal.  And this change won't break pyboard.py
because that tool only looks for "soft reboot".
2019-02-12 15:18:33 +11:00
Damien George
6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Damien George
3ff3e96865 esp8266/modmachine: In lightsleep, only waiti if wifi is turned off.
Otherwise the STA interface can't do DTIM sleeping correctly and power
consumption goes up.
2019-01-31 00:05:00 +11:00
Damien George
808dc95ab8 esp8266/modmachine: Implement simple machine.lightsleep function.
Use of "waiti 0" reduces power consumption by about 3mA compared to a
time.sleep_ms call.
2019-01-30 14:05:53 +11:00
Damien George
2911e3554a esp8266/modmachine: Rename machine.sleep to machine.lightsleep.
While keeping machine.sleep as an alias for machine.lightsleep for
backwards compatibility.
2019-01-30 14:05:53 +11:00
Damien George
d7cc92383c esp8266/modmachine: Implement optional time_ms arg to machine.deepsleep. 2019-01-30 14:05:53 +11:00
Damien George
18d3a5df26 esp8266/esp_mphal: Provide mp_hal_pin_od_high_dht so DHT works reliably.
The original behaviour of open-drain-high was to use the open-drain mode of
the GPIO pin, and this seems to make driving a DHT more reliable.  See
issue #4233.
2019-01-22 00:26:04 +11:00
Damien George
36808d4e6a esp8266/main: Activate UART(0) on dupterm for REPL before boot.py runs.
So that the user can explicitly deactivate UART(0) if needed.  See
issue #4314.

This introduces some risk to "brick" the device, if the user disables the
REPL without providing an alternative REPL (eg WebREPL), or any way to
reenable it.  In such a case the device needs to be erased and
reprogrammed.  This seems unavoidable, given the desire to have the option
to use the UART for something other than the REPL.
2019-01-16 17:24:23 +11:00
Damien George
52bec93755 esp8266/machine_uart: Add rxbuf keyword arg to UART constructor/init.
As per the machine.UART documentation, this is used to set the length of
the UART RX buffer.
2018-12-05 23:31:24 +11:00
Damien George
da1d849ad1 stm32,esp8266,cc3200: Use MICROPY_GC_STACK_ENTRY_TYPE to save some RAM. 2018-12-04 18:32:10 +11:00
Damien George
62b4bebf64 esp8266/modnetwork: Wait for iface to go down before forcing power mgmt.
If the STA interface is connected to an AP then it must be fully
disconnected and deactivated before forcing the power management on.
2018-12-04 10:20:45 +11:00
Damien George
321d75e087 esp8266/modnetwork: Automatically do radio sleep if no interface active.
Reduces current of device by about 55mA when radio is sleeping.
2018-12-01 17:20:05 +11:00
Damien George
9e2dd93145 esp8266/ets_alt_task: Process idle callback if no other events occurred. 2018-12-01 17:20:05 +11:00
Damien George
51482ba925 README: Remove references to "make axtls", it's no longer needed.
Since 0be2ea50e9 axtls is automatically built
as part of the usual "make" build process.
2018-11-15 14:48:17 +11:00
Damien George
746dbf78d3 py/py.mk: When building axtls use -Wno-all to prevent all warnings.
Building axtls gives a lot of warnings with -Wall enabled, and explicitly
disabling all of them cannot be done in a way compatible with gcc and
clang, and likely other compilers.  So just use -Wno-all to prevent all of
the extra warnings (in addition to the necessary -Wno-unused-parameter,
-Wno-uninitialized, -Wno-sign-compare and -Wno-old-style-definition).

Fixes issue #4182.
2018-10-27 23:53:08 +11:00