Commit Graph

6 Commits

Author SHA1 Message Date
robert-hh
c3afafd1ec samd/boards: Clean up comments and some pins in pins.csv files.
Remove two SPARKFUN_SAMD51_THINGS_PLUS pin definitions.  There were
definitions of TXD and RXD, but these pins do not exist on the board.  They
were only shown in the schematics.

Also remove any reference to LED_.  This is just a text change, no
functional change.
2023-02-21 23:13:01 +11:00
robert-hh
ac1e31267b samd/boards: Rework the pins.csv files.
Changes are:
- Remove the LED_Pxxx definitions from pins.csv, now that the LED class is
  gone.
- Remove the '-' lines.
- Add default lines for USB and SWCLK, SWDIO.
2022-10-25 23:40:28 +11:00
robert-hh
65f99e371d samd/boards: Use the same linker file for all SAMD51x19 variants. 2022-10-06 23:14:21 +11:00
robert-hh
20e7313453 samd/clock_config: Add HW_DFLL_USB_SYNC and HW_MCU_OSC32KULP extensions.
Two new compile flags are:

MICROPY_HW_DFLL_USB_SYNC: Effective only if DFLL48 does not run from the
crystal.  It will synchronize the DFLL48M clock with the USB's SOF pulse.
If no USB is connected, it will fall back to open loop mode.  The DFLL48M
clock is then pretty precise, but with a higher clock jitter at SAMD51
devices.

MICROPY_HW_MCU_OSC32KULP: Effective only if the devics uses a crystal as
clock source.  Run the MCU clock from the ULP 32kHz oszillator instead of
the crystal.  This flag was added to cater for a interference problem of
the crystal and Neopixel/Debug pins at Adafruit FEATHER Mx boards, which
causes the board to crash.  Drawback: ticks_ms() and time.time() vs. than
ticks_us() and the peripherals like PWM run at not synchronous clocks.
2022-10-06 23:03:08 +11:00
robert-hh
a9304af8fa samd/boards: Add missing/lost board config and pin definitions.
Fixes are:
- Pin definitions for ADAFRUIT_FEATHER_Mx_EXPRESS and
  ADAFRUIT_ITSYBITSY_M4_EXPRESS.
- For ADAFRUIT_ITSYBITSY_M0_EXPRESS, change the MISO/MOSI name.
- For MINISAM_M4, add the default SPI pins.
- For boards with 32k crystal, add the XOSC32K setting.
2022-10-06 22:58:09 +11:00
robert-hh
949a808076 samd/boards: Add ADAFRUIT_FEATHER_M4_EXPRESS and _ITSYBITSY_M0_EXPRESS.
These two boards are used for testing, so it is favorable to have them
added early.

The full test set is:
- ADAFRUIT_FEATHER_M4_EXPRESS: SAMD51 with 32kHz crystal.
- ADAFRUIT_ITSYBITSY_M0_EXPRESS: SAMD21 without crystal.
- ADAFRUIT_ITSYBITSY_M4_EXPRESS: SAMD51 without crystal.
- SEEED_XIAO: SAM21 with 32kHz crystal.
2022-10-06 22:32:01 +11:00