Commit Graph

74 Commits

Author SHA1 Message Date
Damien George
0b85b5b8b3 travis: Add new job to test unix port with sys.settrace enabled. 2019-08-30 16:49:13 +10:00
Damien George
8f55a8fab6 travis: Build an stm32 board with threading enabled to test it with CI. 2019-07-26 12:44:47 +10:00
Damien George
a67d9155e6 travis: Switch unix stackless build to use clang.
To test a different compiler, other than gcc.
2019-07-17 15:52:27 +10:00
Damien George
14f61a224d travis: Build stm32 mboot for PYBD_SF6 as part of CI. 2019-07-09 11:47:57 +10:00
Damien George
9ca4789130 travis: Add samd port to Travis build. 2019-07-01 17:19:18 +10:00
Damien George
9cebead276 travis: Enable performance benchmark tests on standard unix build. 2019-06-28 16:30:01 +10:00
Damien George
e06dcad5d3 travis: Build esp32 firmware as part of Travis CI.
Toolchain installation and build takes about 3 minutes.
2019-06-25 14:55:10 +10:00
Damien George
cc12f750b4 travis: Build esp8266 firmware as part of Travis CI.
Toolchain installation and build takes about 1 minute.
2019-06-25 14:55:10 +10:00
Damien George
c60e0a09f0 travis: Selectively fetch git submodules only when needed.
This saves time when building on Travis CI: unconditionally fetching all
submodules takes about 40 seconds, but not all are needed for any given
port, so only fetch as necessary.
2019-06-25 14:55:10 +10:00
Damien George
84f1067f7f travis: Build PYBD_SF2 board as part of the stm32 job. 2019-05-31 22:47:55 +10:00
Damien George
2bcb240b55 travis: Enable test for running native code via mpy. 2019-03-08 16:51:09 +11:00
Damien George
775c7b86f0 travis: Update to use Ubuntu 16.04 Xenial for CI builds. 2019-02-12 13:29:22 +11:00
Damien George
b7004efe36 travis: Add nrf port to Travis CI build. 2018-07-20 14:11:28 +10:00
Damien George
3ffcef8bdf travis: Use build stages and parallel jobs under Travis CI.
This change brings the following benefits:

- all existing tests and test behaviour is be retained
- can now use Travis parallel build mechanism
- total time for tests is about 5 mins 30 secs, down from around 10 mins
- two additional test suites are now run: standard (non coverage) unix
  build and nanbox unix build
- much easier to see what is failing: if you click through to the Travis CI
  details each parallel build job is displayed with pass/fail
- scales much better when adding new test targets
2018-07-19 10:04:57 +10:00
Damien George
b789c640f7 travis: Install explicit version of urllib3 for coveralls.
Coveralls requires a "recent" version of urllib3, whereas requests requires
a "not so recent" version, less than 1.23.  So force urllib3 v1.22 to get
it all working.
2018-06-06 20:56:24 +10:00
Damien George
5e1279d41a travis: Pass -j4 to make to speed up compilation.
This seems to reduce the Travis build time by roughly 1 minute / 10%.
2018-03-19 11:57:38 +11:00
Damien George
0b12cc8feb .travis.yml,ports/unix/Makefile: Add coverage test for script via stdin. 2018-02-08 11:30:19 +11:00
Paul Sokolovsky
5455bf79c5 .travis.yml: Build and test strict stackless build.
Previously, testing of stackless build happened (manually) in
travis-stackless branch. However, stackless offers important
featureset, so it's worth to test it as a part of the main
CI. Strict stackless is used because it's the "real" stackless
build, which avoids using C stack as much as possible (non-strict
just prefers heap over C stack, but may end up using the latter).
2017-12-16 20:43:30 +02:00
Paul Sokolovsky
8462f167dc .travis.yml: Update for qemu-arm's testing moved to Makefile.test. 2017-12-13 09:07:51 +02:00
Damien George
06f2fdbe61 travis: Update build command now that stm32 Wiznet config has changed. 2017-10-16 15:51:32 +11:00
Damien George
de981040b3 travis: Use --upgrade when pip is installing cpp-coveralls.
So that the latest urllib3 is retrieved, which has improved SSL security.

This fixes the temporary path from f578947ae3
2017-09-10 22:57:33 +10:00
Damien George
4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Paul Sokolovsky
f578947ae3 .travis.yml: Pin cpp-coveralls at 0.3.12.
Next version, 0.4.0 appears to depend on newer version of urllib3 and
conflicts with version installed in Travis.
2017-07-28 17:37:45 +03:00
Damien George
4d47e6c0db travis: Build STM32F769DISC board instead of F7DISC to test dbl-prec FP. 2017-06-28 15:12:05 +10:00
Damien George
7b7ff60f91 travis: Change an stmhal rule to build PYBV11 instead of default PYBV10.
This allows to test the PYBV11 target as well as the network drivers
without adding another rule.  It also removes the need to use -B,
side-stepping the issue of whether or not -B works with qstr auto
generation.
2017-03-15 22:20:30 +11:00
Damien George
4d1ba482f5 travis: Unconditionally run coveralls analysis, even if others failed.
If, for example, the code-size check failed we would still like to run the
coveralls coverage analysis.
2017-01-20 13:12:23 +11:00
Damien George
97f3797b82 travis: Include persistent bytecode with floats in coverage tests. 2016-12-22 11:27:35 +11:00
Damien George
0db3a41f02 travis: Build STM32 F7 and L4 boards under Travis CI.
The STM32 F7 and L4 boards use significantly different code to the F4
boards so it's important to test them with CI.  To keep CI build times
within a reasonable limit the STM32F4DISC board is no longer built, it's
anyway very similar to the standard F4 build for PYBv1.0.
2016-12-05 11:25:37 +11:00
Paul Sokolovsky
d5cf8c5753 .travis.yml: minimal: Use CROSS=1, for binary size check.
x86 has bloated alignements, etc. Use ARM binary to catch any code size
increases promptly.
2016-10-25 11:43:56 +03:00
Paul Sokolovsky
ca008bfd2d .travis.yml: Integrate tools/check_code_size.sh. 2016-10-25 11:43:55 +03:00
Damien George
cc7c311b5e travis: Run feature and coverage test for precompiled mpy files. 2016-09-20 12:21:53 +10:00
stijn
dd0e6ddfeb travis: Abandon mingw32 in favour of mingw-w64
This is actually long overdue: the README in the windows directory has been
updated once to indicate mingw32 is abandoned and not ok to use with uPy,
but we forgot travis builds were still using it.
As a bonus the travis build will succeed again since moduerrno.c now compiles.
(see https://github.com/micropython/micropython/pull/2399)
2016-09-10 10:15:30 +10:00
Damien George
e4d6a10dc9 travis: Build mpy-cross as part of the Travis process.
It's built first in case any ports need to use it.
2016-09-05 17:33:56 +10:00
Damien George
56bb6f3979 travis: Run unix thread tests. 2016-07-09 16:53:40 +01:00
Paul Sokolovsky
20aa9c8511 .travis.yml: Install gcc-arm-none-eabi with --force-yes for now.
There appears to be issue signature problem with the PPA package we use,
so workaround it this way for now. Warning: with broken signature, there's
always a possibility that PPA was hacked and ships trojaned binaries.
2016-05-26 13:06:22 +03:00
Paul Sokolovsky
701c4152c1 tarvis: Unbreak build by ignoring lack of i386 arch in some repos.
For some reason, Travis now has Google Chrome PPA included in the builder
image, that lacks i386 arch, that leads to apt-get update error. So, ignore
it (this is not ideal as may lead to actual repo update failures to be missed,
leading to installation of old package, leading to weird errors; let's keep
that in mind).
2016-03-03 11:06:36 +02:00
Paul Sokolovsky
ac16cc9a35 .travis.yml: Switch to Ubuntu 14.04 Trusty.
This allows to cut number of packages installed from 3rd-party package repos,
and otherwise cut number of overrides and hacks.
2016-01-17 20:07:41 +02:00
Damien George
aeadda4eac travis: Add unix NaN-boxing build to Travis builds.
This will help make sure new commits work with OBJ_REPR_D.
2016-01-15 11:13:42 +00:00
Paul Sokolovsky
9058a7031f travis: Build "deplibs" in unix port. 2015-10-20 01:50:27 +03:00
Damien George
65dc960e3b unix-cpy: Remove unix-cpy. It's no longer needed.
unix-cpy was originally written to get semantic equivalent with CPython
without writing functional tests.  When writing the initial
implementation of uPy it was a long way between lexer and functional
tests, so the half-way test was to make sure that the bytecode was
correct.  The idea was that if the uPy bytecode matched CPython 1-1 then
uPy would be proper Python if the bytecodes acted correctly.  And having
matching bytecode meant that it was less likely to miss some deep
subtlety in the Python semantics that would require an architectural
change later on.

But that is all history and it no longer makes sense to retain the
ability to output CPython bytecode, because:

1. It outputs CPython 3.3 compatible bytecode.  CPython's bytecode
changes from version to version, and seems to have changed quite a bit
in 3.5.  There's no point in changing the bytecode output to match
CPython anymore.

2. uPy and CPy do different optimisations to the bytecode which makes it
harder to match.

3. The bytecode tests are not run.  They were never part of Travis and
are not run locally anymore.

4. The EMIT_CPYTHON option needs a lot of extra source code which adds
heaps of noise, especially in compile.c.

5. Now that there is an extensive test suite (which tests functionality)
there is no need to match the bytecode.  Some very subtle behaviour is
tested with the test suite and passing these tests is a much better
way to stay Python-language compliant, rather than trying to match
CPy bytecode.
2015-08-17 12:51:26 +01:00
Damien George
d792d9e49e unix: Make extra-coverage function callable from Python scripts.
This allows the output of the extra-coverage tests to be checked using
the normal run-tests script.
2015-05-08 09:18:38 +01:00
Damien George
d3b32caea4 unix: Add special function to improve coverage.
The function and corresponding command-line option are only enabled for
the coverage build.  They are used to exercise uPy features that can't
be properly tested by Python scripts.
2015-05-08 00:19:56 +01:00
Damien George
81e661f28b travis: Add automated coverage testing using coveralls. 2015-03-01 14:50:09 +00:00
Damien George
eb0a7129a5 travis: Use CPython3.4 instead of 3.3. 2015-02-27 01:07:04 +00:00
danicampora
8785645a95 cc3200: Add cc3200 port of MicroPython.
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00
Damien George
bc47c287df travis, minimal: Install gcc-multilib for -m32; use /bin/echo for test. 2015-01-14 00:26:39 +00:00
Damien George
d710cef661 minimal: Add simple test; build and run minimal test on Travis CI. 2015-01-13 12:39:29 +00:00
Damien George
7630d9ca0e travis: grep for failure in qemu-arm output if tests fail. 2015-01-12 15:50:08 +00:00
Damien George
85e8e2ed5b qemu-arm: Add 'test' target to Makefile to run and verify test suite.
Replaces RUN_TEST=1 definition; now "make test" in qemu-arm directory
will run tests/basics/ and check that they all succeed.

This patch also enables the test on Travis CI.
2015-01-09 00:03:21 +00:00
Damien George
11aa91615e stmhal: Fix ptr arith in CC3000 code; enable network build in travis. 2014-10-30 15:28:15 +00:00