Commit Graph

1149 Commits

Author SHA1 Message Date
Damien George
ba607809f2 stm32/modpyb: Support building with PY_PYB_LEGACY on and HW_USB_HID off. 2019-08-15 12:03:32 +10:00
Kenta IDA
b6906fa573 esp32/network_ppp: Add authentication support to the PPP interface.
This commit adds the connect() method to the PPP interface and requires
that connect() be called after active(1).  This is a breaking change for
the PPP API.

With the connect() method it's now possible to pass in authentication
information for PAP/CHAP, eg:

    ppp.active(1)
    ppp.connect(authmode=ppp.AUTH_PAP, username="user", "password="password")

If no authentication is needed simply call connect() without any
parameters.  This will get the original behaviour of calling active(1).
2019-08-14 17:20:58 +10:00
Chris Wilson
3d02ebb4e8 stm32/sdcard: Support configuring the SD/MMC bus width to 1 or 4 bits.
Some SD/MMC breakout boards don't support 4-bit bus mode.  This adds a new
macro MICROPY_HW_SDMMC_BUS_WIDTH that allows each board to define the width
of the SD/MMC bus interface used on that board, defaulting to 4 bits.
2019-08-08 12:53:05 +10:00
Damien George
2d3d4f7483 esp8266/mpconfigport.h: Enable lwIP raw sockets. 2019-08-06 15:56:05 +10:00
Damien George
102815f700 stm32/mpconfigport.h: Enable lwIP raw sockets. 2019-08-06 15:56:05 +10:00
Damien George
0e2b224b07 stm32/lwip_inc: Enable raw socket type. 2019-08-06 15:56:05 +10:00
Damien George
7c15e50eb8 esp32/Makefile: Include CFLAGS_EXTRA in CFLAGS definition.
Following other ports, so builds can be customised more easily, eg on the
command line building with a user C-module.
2019-07-30 17:31:23 +10:00
Damien George
473157eeb9 stm32/usbd_hid_interface: Include extra header to build with threading. 2019-07-26 12:44:14 +10:00
Damien George
ad0b7cb017 stm32/boards/xxx_WB55: Enable USB HID now that it works on WB MCUs. 2019-07-25 17:49:53 +10:00
Damien George
fa07deda9f stm32/usbd_hid_interface: Rewrite USB HID interface code.
The previous version did not work on MCUs that only had USB device mode
(compared to OTG) because of the handling of NAK.  And this previous
handling of NAK had a race condition where a new packet could come in
before USBD_HID_SetNAK was called (since USBD_HID_ReceivePacket clears NAK
as part of its operation).  Furthermore, the double buffering of incoming
reports was not working, only one buffer could be used at a time.

This commit rewrites the HID interface code to have a single incoming
buffer, and only calls USBD_HID_ReceivePacket after the user has read the
incoming report (similar to how the VCP does its flow control).  As such,
USBD_HID_SetNAK and USBD_HID_ClearNAK are no longer needed.

API functionality from the user's point of view should be unchanged with
this commit.
2019-07-25 17:42:17 +10:00
Damien George
b1129df478 stm32/dma: Fix re-start of DMA stream by clearing all event flags.
As per the datasheet, all event flags for a stream must be cleared before
enabling it.  Fixes issue #4944 (with DAC.write_timed).
2019-07-25 16:48:26 +10:00
badlyby
3b258ef213 stm32/boards/NUCLEO_F722ZE: Add definition files for new board. 2019-07-25 16:31:36 +10:00
badlyby
09267bb147 stm32/boards/stm32f722.ld: Provide memory regions for internal FS. 2019-07-25 16:31:36 +10:00
badlyby
0da2f6f23a stm32/flashbdev: Support internal filesystem on STM32F722/23/32/33. 2019-07-25 16:31:12 +10:00
Amir Gonnen
995f9cfdfc esp32: Pin MicroPython tasks to a specific core.
On this port the GIL is enabled and everything works under the assumption
of the GIL, ie that a given task has exclusive access to the uPy state, and
any ISRs interrupt the current task and therefore the ISR inherits
exclusive access to the uPy state for the duration of its execution.

If the MicroPython tasks are not pinned to a specific core then an ISR may
be executed on a different core to the task, making it possible for the
main task and an ISR to execute in parallel, breaking the assumption of the
GIL.

The easiest and safest fix for this is to pin all MicroPython related code
to the same CPU core, as done by this patch.  Then any ISR that accesses
MicroPython state must be registered from a MicroPython task, to ensure it
is invoked on the same core.

See issue #4895.
2019-07-25 15:33:47 +10:00
Damien George
e3e7e3a781 esp32/Makefile: Simplify include of IDF source by using wildcards. 2019-07-20 14:07:18 +10:00
Damien George
b88e51d718 esp32/Makefile: Put OBJ and LIB rule additions in gen_espidf_lib_rule. 2019-07-20 13:04:55 +10:00
Jim Mussared
331c224e07 esp32/Makefile: Fix path expansion for ESPIDF_DRIVER_O.
It was using subst to s/.c/.o/ which changed .c anywhere in the path.
2019-07-20 12:32:43 +10:00
stijn
9da46a98cb windows/mpconfigport.h: Don't define restrict/inline/alignof for C++.
The C++ standard forbids redefining keywords, like inline and alignof, so
guard these definitions to avoid that, allowing to include the MicroPython
headers by C++ code.
2019-07-19 16:58:02 +10:00
Damien George
a29334761d esp32: Add support for hardware I2C. 2019-07-19 16:31:25 +10:00
Damien George
0c12adca46 stm32/boards/USBDONGLE_WB55: Add definition files for new board. 2019-07-17 17:00:34 +10:00
Damien George
d2a8fb747f stm32/boards/NUCLEO_WB55: Add definition files for new board. 2019-07-17 17:00:34 +10:00
Damien George
9849567a06 stm32/boards: Add MCU support files for STM32WB55. 2019-07-17 16:50:42 +10:00
Damien George
59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George
d42392b9a7 stm32/make-stmconst.py: Allow more variation in parens and int-suffix L. 2019-07-17 16:27:17 +10:00
Damien George
02b2ad4fbd stm32/boards/STM32F769DISC: Fix length of FLASH_APP section.
Fixes issue #4924.
2019-07-17 16:19:50 +10:00
Damien George
baea43bba7 stm32/boards/B_L072Z_LRWAN1: Enable USB VCP support. 2019-07-16 14:50:44 +10:00
Damien George
64aebca155 stm32/Makefile: Allow a board to disable float support.
By using "MICROPY_FLOAT_IMPL = none" in its mpconfigboard.mk file.
2019-07-16 14:47:32 +10:00
Damien George
102d9911e9 stm32/mphalport: Fix GPIO clock enable for L0 MCUs. 2019-07-16 14:47:12 +10:00
Damien George
4096fa397b stm32/powerctrlboot: Increase SYSCLK to 32MHz for L0 MCUs. 2019-07-16 14:46:31 +10:00
Damien George
4c1ad1f691 stm32: Add support for USB on L0 MCUs. 2019-07-16 14:45:53 +10:00
Damien George
788e7f50f2 stm32/usbd_cdc_interface: Make CDC TX/RX buffer sizes configurable. 2019-07-16 14:41:59 +10:00
Damien George
f302f784e9 stm32/usb: Add config options to disable USB MSC and/or HID.
The new configurations MICROPY_HW_USB_MSC and MICROPY_HW_USB_HID can be
used by a board to enabled or disable MSC and/or HID.  They are both
enabled by default.
2019-07-16 14:39:21 +10:00
Damien George
fd49fcb229 stm32/gccollect: Always use MP_STATE_THREAD(stack_top) to get stack top.
In a non-thread build, using &_ram_end as the top-of-stack is no longer
correct because the stack is not always at the very top end of RAM.  See
eg 04c7cdb668 and
3786592097.  The correct value to use is
&_estack, which is the value stored in MP_STATE_THREAD(stack_top), and
using the same code for both thread and non-thread builds makes the code
cleaner.
2019-07-11 17:32:01 +10:00
Paul m. p. P
a1c870e9f4 javascript: Enable support for frozen bytecode via FROZEN_MPY_DIR. 2019-07-09 13:17:15 +10:00
Paul m. p. P
42d30c5baf unix/unix_mphal: Include time.h for CLOCK_MONOTONIC. 2019-07-09 13:05:59 +10:00
Damien George
a17b901a9e stm32/boards/B_L072Z_LRWAN1: Add definition files for new board. 2019-07-09 12:54:09 +10:00
Damien George
278e9bffe9 stm32/mboot: Update dependencies to enable parallel build with -j. 2019-07-09 11:46:47 +10:00
Damien George
342539bdcc stm32/mboot: Use STARTUP_FILE from stm32lib. 2019-07-09 11:35:47 +10:00
Damien George
5a81d2d6b8 stm32/mboot: Remove use of BSRRL/H for H7 MCUs due to stm32lib update. 2019-07-09 11:34:54 +10:00
Damien George
c8f19f1371 stm32/mboot: Make _estack an array to avoid compiler warnings.
The compiler can warn about out-of-bounds array access if _estack is just a
single uint8_t.
2019-07-09 11:33:57 +10:00
Damien George
d43dd886a5 stm32/boards/NUCLEO_F413ZH: Remove STARTUP_FILE, it's defined globally.
The Makefile now defines this variable to the correct value (but it can
still be overridden by a board if necessary).
2019-07-09 11:32:12 +10:00
Chris Mason
c24d81119c stm32/boards/NUCLEO_L452RE: Add definition files for new board. 2019-07-08 16:50:45 +10:00
Chris Mason
64181b5f76 stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
Damien George
eea61a09c4 stm32/boards/NUCLEO_F446RE: Enable DAC. 2019-07-08 16:08:40 +10:00
Damien George
5fd62c8992 stm32: Remove SystemInit funcs, use stm32lib versions instead.
stm32lib now provides system_stm32XXxx.c source files for all MCU variants,
which includes SystemInit and prescaler tables.  Since these are quite
standard and don't need to be changed, switch to use them instead of custom
variants, making the start-up code cleaner.

The SystemInit code in stm32lib was checked and is equivalent to what is
removed from the stm32 port in this commit.
2019-07-08 15:23:53 +10:00
Damien George
c15dc2c4b9 stm32/powerctrl: Move F0's SystemClock_Config to powerctrlboot.c. 2019-07-08 15:23:53 +10:00
Damien George
21ecf8be5f stm32/powerctrl: Move L0's SystemClock_Config to powerctrlboot.c file. 2019-07-08 15:23:53 +10:00
Damien George
7c2e83324b stm32/boards/NUCLEO_L073RZ: Add definition files for new board. 2019-07-05 17:28:54 +10:00
Damien George
6053e450b8 stm32/mpconfigport.h: Make "framebuf" module configurable by a board. 2019-07-05 17:26:49 +10:00