Commit Graph

82 Commits

Author SHA1 Message Date
Damien George
2d3d4f7483 esp8266/mpconfigport.h: Enable lwIP raw sockets. 2019-08-06 15:56:05 +10:00
Damien George
ef00048fed extmod/modwebrepl: Add config option to put filebuf[512] on stack/bss.
Since the esp8266 has a small stack this buffer is kept in the BSS.
2019-07-03 12:55:57 +10:00
Damien George
89a23a05b3 esp8266: Provide custom machine_time_pulse_us that feeds soft WDT.
So that the timeout for machine.time_pulse_us() can be large.

Fixes issue #2775.
2019-07-01 22:53:00 +10:00
Damien George
c80614dfc8 ports: Provide mp_hal_stdio_poll for sys.stdio polling where needed. 2019-07-01 17:10:12 +10:00
Paul m. p. P
637aa9784d esp8266/uart: Fix invalid ringbuf name when event driven REPL enabled. 2019-06-17 12:34:10 +10:00
Damien George
5357dad52e esp8266: Fix ticks_ms to correctly handle wraparound of system counter.
Fixes issue #4795.
2019-05-24 15:37:34 +10:00
Paul Sokolovsky
016d9a40fe various: Add and update my copyright line based on git history.
For modules I initially created or made substantial contributions to.
2019-05-17 18:04:15 +10:00
Damien George
99a8fa7940 esp8266/modmachine: Handle overflow of timer to get longer periods.
Can now handle up to about 298 days maximum for millisecond periods.

Fixes issue #4664.
2019-05-10 15:50:35 +10:00
Damien George
0646e607b5 ports: Convert to use pyexec_file_if_exists() to execute boot/main.py.
The stm32 and nrf ports already had the behaviour that they would first
check if the script exists before executing it, and this patch makes all
other ports work the same way.  This helps when developing apps because
it's hard to tell (when unconditionally trying to execute the scripts) if
the resulting OSError at boot up comes from missing boot.py or main.py, or
from some other error.  And it's not really an error if these scripts don't
exist.
2019-04-26 15:22:14 +10:00
Damien George
c7d19dc0ad ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code. 2019-03-14 12:22:49 +11:00
Damien George
b5f33ac2cb ports: Update to work with new oofatfs version. 2019-03-05 15:56:39 +11:00
Damien George
8ce22662fe esp8266/modmachine: Call ets_event_poll after waiti in machine.idle.
Because "waiti 0" may have waited for a while (eg 500ms) and the internal
WDT may need to be fed immediately.

Fixes issue #4459.
2019-02-28 15:44:37 +11:00
Yonatan Goldschmidt
bc4f8b438b extmod/moduwebsocket: Refactor websocket to uwebsocket.
As mentioned in #4450, `websocket` was experimental with a single intended
user, `webrepl`. Therefore, we'll make this change without a weak
link `websocket` -> `uwebsocket`.
2019-02-14 00:35:45 +11:00
Mike Causer
812969d615 all: Change PYB message prefix to MPY.
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc.

Having a consistent prefix across ports reduces the difference between
ports, which is a general goal.  And this change won't break pyboard.py
because that tool only looks for "soft reboot".
2019-02-12 15:18:33 +11:00
Damien George
6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Damien George
3ff3e96865 esp8266/modmachine: In lightsleep, only waiti if wifi is turned off.
Otherwise the STA interface can't do DTIM sleeping correctly and power
consumption goes up.
2019-01-31 00:05:00 +11:00
Damien George
808dc95ab8 esp8266/modmachine: Implement simple machine.lightsleep function.
Use of "waiti 0" reduces power consumption by about 3mA compared to a
time.sleep_ms call.
2019-01-30 14:05:53 +11:00
Damien George
2911e3554a esp8266/modmachine: Rename machine.sleep to machine.lightsleep.
While keeping machine.sleep as an alias for machine.lightsleep for
backwards compatibility.
2019-01-30 14:05:53 +11:00
Damien George
d7cc92383c esp8266/modmachine: Implement optional time_ms arg to machine.deepsleep. 2019-01-30 14:05:53 +11:00
Damien George
18d3a5df26 esp8266/esp_mphal: Provide mp_hal_pin_od_high_dht so DHT works reliably.
The original behaviour of open-drain-high was to use the open-drain mode of
the GPIO pin, and this seems to make driving a DHT more reliable.  See
issue #4233.
2019-01-22 00:26:04 +11:00
Damien George
36808d4e6a esp8266/main: Activate UART(0) on dupterm for REPL before boot.py runs.
So that the user can explicitly deactivate UART(0) if needed.  See
issue #4314.

This introduces some risk to "brick" the device, if the user disables the
REPL without providing an alternative REPL (eg WebREPL), or any way to
reenable it.  In such a case the device needs to be erased and
reprogrammed.  This seems unavoidable, given the desire to have the option
to use the UART for something other than the REPL.
2019-01-16 17:24:23 +11:00
Damien George
52bec93755 esp8266/machine_uart: Add rxbuf keyword arg to UART constructor/init.
As per the machine.UART documentation, this is used to set the length of
the UART RX buffer.
2018-12-05 23:31:24 +11:00
Damien George
da1d849ad1 stm32,esp8266,cc3200: Use MICROPY_GC_STACK_ENTRY_TYPE to save some RAM. 2018-12-04 18:32:10 +11:00
Damien George
62b4bebf64 esp8266/modnetwork: Wait for iface to go down before forcing power mgmt.
If the STA interface is connected to an AP then it must be fully
disconnected and deactivated before forcing the power management on.
2018-12-04 10:20:45 +11:00
Damien George
321d75e087 esp8266/modnetwork: Automatically do radio sleep if no interface active.
Reduces current of device by about 55mA when radio is sleeping.
2018-12-01 17:20:05 +11:00
Damien George
9e2dd93145 esp8266/ets_alt_task: Process idle callback if no other events occurred. 2018-12-01 17:20:05 +11:00
Damien George
51482ba925 README: Remove references to "make axtls", it's no longer needed.
Since 0be2ea50e9 axtls is automatically built
as part of the usual "make" build process.
2018-11-15 14:48:17 +11:00
Damien George
746dbf78d3 py/py.mk: When building axtls use -Wno-all to prevent all warnings.
Building axtls gives a lot of warnings with -Wall enabled, and explicitly
disabling all of them cannot be done in a way compatible with gcc and
clang, and likely other compilers.  So just use -Wno-all to prevent all of
the extra warnings (in addition to the necessary -Wno-unused-parameter,
-Wno-uninitialized, -Wno-sign-compare and -Wno-old-style-definition).

Fixes issue #4182.
2018-10-27 23:53:08 +11:00
Damien George
bbccb0f630 esp8266: Remove scanning of GC pointers in native code block.
The native code no longer holds live GC pointers so doesn't need to be
scanned.
2018-09-27 23:46:09 +10:00
Damien George
5cd2c7f2e7 esp8266/main: Increase heap by 2kb, now that axtls rodata is in ROM. 2018-09-08 00:09:03 +10:00
Damien George
eed83caf1d esp8266/Makefile: Remove build of libaxtls.a and add back tuned config. 2018-09-08 00:07:23 +10:00
Damien George
da2d2b6d88 py/mpconfig.h: Introduce MICROPY_DEBUG_PRINTER for debugging output.
This patch in effect renames MICROPY_DEBUG_PRINTER_DEST to
MICROPY_DEBUG_PRINTER, moving its default definition from
lib/utils/printf.c to py/mpconfig.h to make it official and documented, and
makes this macro a pointer rather than the actual mp_print_t struct.  This
is done to get consistency with MICROPY_ERROR_PRINTER, and provide this
macro for use outside just lib/utils/printf.c.

Ports are updated to use the new macro name.
2018-08-02 14:04:44 +10:00
Nicko van Someren
c3c914f4dd esp8266,esp32: Implement high-res timers using new tick_hz argument.
machine.Timer now takes a new argument in its constructor (or init method):
tick_hz which specified the units for the period argument.  The period of
the timer in seconds is: period/tick_hz.

For backwards compatibility tick_hz defaults to 1000.  If the user wants to
specify the period (numerator) in microseconds then tick_hz can be set to
1000000.  The user can also specify a period of an arbitrary number of
cycles of an arbitrary frequency using these two arguments.

An additional freq argument has been added to allow frequencies to be
specified directly in Hertz.  This supports floating point values when
available.
2018-07-17 13:17:23 +10:00
Damien George
bccf9d3dcf esp8266: Let machine.WDT trigger the software WDT if obj is not fed.
This patch allows scripts to have more control over the software WDT.  If
an instance of machine.WDT is created then the underlying OS is prevented
from feeding the software WDT, and it is up to the user script to feed it
instead via WDT.feed().  The timeout for this WDT is currently fixed and
will be between 1.6 and 3.2 seconds.
2018-07-03 15:31:10 +10:00
Damien George
b6e5f82ba5 esp8266/modesp: Run ets_loop_iter before/after doing flash erase/write.
A flash erase/write takes a while and during that time tasks may be
scheduled via an IRQ.  To prevent overflow of the task queue (and loss of
tasks) call ets_loop_iter() before and after slow flash operations.

Note: if a task is posted to a full queue while a flash operation is in
progress then this leads to a fault when trying to print out the error
message that the queue is full.  This patch doesn't try to fix this
particular issue, it just prevents it from happening in the first place.
2018-07-03 14:46:29 +10:00
Damien George
8f86fbfd6c ports: Enable ure.sub() on stm32, esp8266 (not 512k) and esp32. 2018-07-02 15:13:18 +10:00
Damien George
d800ed1877 esp8266/esp8266_common.ld: Put mp_keyboard_interrupt in iRAM.
This function may be called from a UART IRQ, which may interrupt the system
when it is erasing/reading/writing flash.  In such a case all code
executing from the IRQ must be in iRAM (because the SPI flash is busy), so
put mp_keyboard_interrupt in iRAM so ctrl-C can be caught during flash
access.

This patch also takes get_fattime out of iRAM and puts it in iROM to make
space for mp_keyboard_interrupt.  There's no real need to have get_fattime
in iRAM because it calls other functions in iROM.

Fixes issue #3897.
2018-06-28 12:55:54 +10:00
Damien George
bc6c56d75d esp8266/mpconfigport.h: Enable ucryptolib module for standard build.
It remains disabled for the 512k build.
2018-06-27 16:45:22 +10:00
Damien George
565f590586 ports: Enable IOBase on unix, stm32, esp8266 and esp32.
It's a core feature, in particular required for user-streams with uasyncio.
2018-06-12 12:29:26 +10:00
Damien George
b2fa1b50ed ports: Call gc_sweep_all() when doing a soft reset.
This calls finalisers of things like files and sockets to cleanly close
them.
2018-06-12 11:56:25 +10:00
Damien George
93150a0d40 ports: Enable descriptors on stm32, esp8266, esp32 ports.
They are now efficient (in runtime performance) and provide a useful
feature that's hard to obtain without them enabled.

See issue #3644 and PR #3826 for background.
2018-06-08 12:23:08 +10:00
Damien George
f35aae366c extmod/vfs_fat: Rename FileIO/TextIO types to mp_type_vfs_fat_XXX.
So they don't clash with other VFS implementations.
2018-06-06 14:28:23 +10:00
Damien George
aace60a75e esp8266/modules/ntptime.py: Remove print of newly-set time.
It should be up to the user if they want to print the new time out or not.

Fixes issue #3766.
2018-06-05 14:30:35 +10:00
Damien George
20b4b85f72 ports: Enable MICROPY_PY_BUILTINS_ROUND_INT on selected ports. 2018-05-22 14:18:16 +10:00
Damien George
afd0701bf7 esp8266: Change UART(0) to attach to REPL via uos.dupterm interface.
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function.  Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch).  UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this.  For example, to attach use:

    import uos, machine
    uart = machine.UART(0, 115200)
    uos.dupterm(uart, 1)

and to detach use:

    uos.dupterm(None, 1)

When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None.  Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach).  When detached the UART(0) can be used for
other purposes.

If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
2018-05-21 11:31:59 +10:00
Damien George
58331e3c28 esp8266/modmachine: Allow I2C and SPI to be configured out of the build.
I2C costs about 3000 bytes of code, and SPI costs about 4400 bytes.
2018-05-17 23:37:12 +10:00
Damien George
dd13065843 esp8266/modnetwork: Raise ValueError when getting invalid WLAN id.
Instead of crashing due to out-of-bounds array access.  Fixes #3348.
2018-05-17 22:12:24 +10:00
Damien George
f8a5cd24d8 esp8266/modnetwork: Return empty str for hostname if STA is inactive.
Instead of crashing due to NULL pointer dereference.  Fixes issue #3341.
2018-05-17 22:11:22 +10:00
Damien George
94a79f340d esp8266/mpconfigport.h: Add some weak links to common Python modules.
To make it easier/simpler to write code that can run under both CPython and
on an ESP8266 board.
2018-05-17 13:27:18 +10:00
Damien George
6410e174c5 esp8266: Disable DEBUG_PRINTERS for 512k build.
Disabling this saves around 6000 bytes of code space and gets the 512k
build fitting in the available flash again (it increased lately due to an
increase in the size of the ESP8266 SDK).
2018-05-02 15:51:19 +10:00