Commit Graph

495 Commits

Author SHA1 Message Date
Damien George
466ad35a72 esp32/boards: Enable size optimisation for builds.
This enables -Os for compilation, but still keeps full assertion messages.
With IDF v4.2, -Os changes the GENERIC firmware size from 1512176 down to
1384640, and the GENERIC_SPIRAM firmware is now 1452320 which fits in the
allocated partition.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-19 10:42:16 +11:00
Thorsten von Eicken
2c1299b007 extmod/modussl: Fix ussl read/recv/send/write errors when non-blocking.
Also fix related problems with socket on esp32, improve docs for
wrap_socket, and add more tests.
2021-02-17 11:50:54 +11:00
Thorsten von Eicken
902da05a18 esp32: Set MICROPY_USE_INTERNAL_ERRNO=0 to use toolchain's errno.h.
The underlying OS (the ESP-IDF) uses it's own internal errno codes and so
it's simpler and cleaner to use those rather than trying to convert
everything to the values defined in py/mperrno.h.
2021-02-15 23:47:02 +11:00
Thorsten von Eicken
771376a0cb esp32/modsocket: Remove unix socket error code translation.
The ESP-IDF has its own errno codes which should propagate out to the user.
2021-02-15 23:45:14 +11:00
Damien George
f12462ddc4 esp32: Remove obsolete IDF v3 code wrapped in MICROPY_ESP_IDF_4.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 23:22:05 +11:00
Damien George
a915002177 esp32: Add support to build with ESP-IDF v4.2.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 23:12:20 +11:00
Damien George
d191d88cab esp32: Add support to build with ESP-IDF v4.1.1.
ESP-IDF v4.0.2 is still supported.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 23:11:26 +11:00
Damien George
e017f276f7 esp32/README: Update based on new IDF v4 cmake build process.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:11 +11:00
Damien George
da2b5fa1c1 esp32/boards: Enable BLE on all boards.
BLE was enabled by default on all boards in the existing make build.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:07 +11:00
Damien George
26b17fd28a esp32/boards: Remove old IDF v3 sdkconfig values.
IDF v3 is no longer supported with the move to cmake.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:03 +11:00
Damien George
9f035d6bb7 esp32: Remove traditional "make" capability.
It's now replaced by cmake/idf.py.  But a convenience Makefile is still
provided with traditional targets like "all" and "deploy".

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:37:58 +11:00
Damien George
97072b7224 esp32: Add explicit initialisers to silence compiler warnings.
This makes no functional change.  See similar commit
9aa58cf8ba

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:37:58 +11:00
Damien George
9c2231f47a esp32/esp32_rmt: Don't do unnecessary check for unsigned less than zero.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:37:52 +11:00
Damien George
9b90882146 esp32: Add support to build using IDF with cmake.
This commit adds support for building the esp32 port with cmake, and in
particular it builds MicroPython as a component within the ESP-IDF.  Using
cmake and the ESP-IDF build infrastructure makes it much easier to maintain
the port, especially with the various new ESP32 MCUs and their required
toolchains.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 12:48:39 +11:00
Damien George
ad4656b861 all: Rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD.
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture.  So rename this config value to better reflect what it
measures, and also prefix it with MP_.

For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
Damien George
7c44354592 ports: Remove def of MP_PLAT_PRINT_STRN if it's the same as the default.
To simplify config, there's no need to specify MP_PLAT_PRINT_STRN if it's
the same as the default definition in py/mpconfig.h.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:39:17 +11:00
IhorNehrutsa
769e822f19 esp32/modnetwork: Synchronize WiFi AUTH_xxx constants with IDF values. 2021-01-23 16:49:16 +11:00
Damien George
64180f0742 extmod/machine_i2c: Add init protocol method for generic I2C bindings.
Hardware I2C implementations must provide a .init() protocol method if they
want to support reconfiguration.  Otherwise the default is that i2c.init()
raises an OSError (currently the case for all ports).

mp_machine_soft_i2c_locals_dict is renamed to mp_machine_i2c_locals_dict to
match the generic SPI bindings.

Fixes issue #6623 (where calling .init() on a HW I2C would crash).

Signed-off-by: Damien George <damien@micropython.org>
2020-11-23 19:45:04 +11:00
robert
5af3c046c7 esp32,esp8266: Remove "FAT" from warning message in inisetup.py.
Because FAT is not any more the only filesystem used.
2020-11-18 16:26:19 +11:00
Jonathan Hogg
8a917ad252 esp32/machine_pin: Reset pin if init sets mode.
This will forcibly grab the pin back from the ADC if it has previously been
associated with it.

Fixes #5771.
2020-11-12 15:27:41 +11:00
stijn
fad4079778 esp32,unix: Support building C++ code.
Support building .cpp files and linking them into the micropython
executable in a way similar to how it is done for .c files.  The main
incentive here is to enable user C modules to use C++ files (which are put
in SRC_MOD_CXX by py.mk) since the core itself does not utilize C++.

However, to verify build functionality a unix overage test is added.  The
esp32 port already has CXXFLAGS so just add the user modules' flags to it.
For the unix port use a copy of the CFLAGS but strip the ones which are not
usable for C++.
2020-10-29 15:29:50 +11:00
stijn
f1666419a8 py/mkrules.mk: Add target for compiling C++ files.
Move the target from the ESP32 Makefile since that does what is needed
already, but also include files from user C modules as is done for the C
files.
2020-10-29 15:27:18 +11:00
robert
b4062894df esp32/mpconfigport.h: Seed the urandom module on import.
For seeding, the RNG function of the ESP-IDF is used, which is told to be a
true RNG, at least when WiFi or Bluetooth is enabled.  Seeding on import is
as per CPython.  To obtain a reproducible sequence of pseudo-random numbers
one must explicitly seed with a known value.
2020-10-29 14:11:08 +11:00
Andrew Leech
97108fce57 esp32/mpconfigport.h: Enable MICROPY_PY_DELATTR_SETATTR.
To align with unix and stm32 ports.
2020-10-21 11:11:48 +11:00
Damien George
1dc64359da esp32: Use path relative to root for netutils/timeutils headers.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-06 12:32:20 +11:00
Damien George
d4b61b0017 extmod/utime_mphal: Add generic utime.time_ns() function.
It requires mp_hal_time_ns() to be provided by a port.  This function
allows very accurate absolute timestamps.

Enabled on unix, windows, stm32, esp8266 and esp32.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 14:20:42 +10:00
Damien George
71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
9e0533b9e1 extmod/machine_spi: Remove "id" arg in SoftSPI constructor.
The SoftSPI constructor is now used soley to create SoftSPI instances, it
can no longer delegate to create a hardware-based SPI instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
aaed33896b extmod/machine_i2c: Remove "id" arg in SoftI2C constructor.
The SoftI2C constructor is now used soley to create SoftI2C instances, it
can no longer delegate to create a hardware-based I2C instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
8f20cdc353 all: Rename absolute time-based functions to include "epoch".
For time-based functions that work with absolute time there is the need for
an Epoch, to set the zero-point at which the absolute time starts counting.
Such functions include time.time() and filesystem stat return values.  And
different ports may use a different Epoch.

To make it clearer what functions use the Epoch (whatever it may be), and
make the ports more consistent with their use of the Epoch, this commit
renames all Epoch related functions to include the word "epoch" in their
name (and remove references to "2000").

Along with this rename, the following things have changed:

- mp_hal_time_ns() is now specified to return the number of nanoseconds
  since the Epoch, rather than since 1970 (but since this is an internal
  function it doesn't change anything for the user).

- littlefs timestamps on the esp8266 have been fixed (they were previously
  off by 30 years in nanoseconds).

Otherwise, there is no functional change made by this commit.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 17:20:34 +10:00
Damien George
bd7af6151d ports: Add utime.gmtime() function.
To portably get the Epoch.  This is simply aliased to localtime() on ports
that are not timezone aware.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:25:36 +10:00
Mirko Vogt
ecb36d2439 esp32/modnetwork: Re-enable PPP support for IDF-SDK >=v4.
PPP support was disabled in 96008ff59a -
marked as "unsupported" due to an early IDF v4 release.  With the currently
supported IDF v4.x version - 4c81978a - it appears to be working just fine.
2020-09-18 15:57:21 +10:00
Jim Mussared
52d6eeb409 esp32/boards/sdkconfig.base: Set default IDF log level to ERROR.
This commit changes the default logging level on all esp32 boards to ERROR.
The esp32 port is now stable enough that it makes sense to remove the info
logs to make the output cleaner, and to match other ports.  More verbose
logging can always be reenabled via esp.osdebug().

This also fixes issue #6354, error messages from NimBLE: the problem is
that ble.active(True) will cause the IDF's NimBLE port to reset the
"NimBLE" tag back to the default level (which was INFO prior to this
commit).  Even if the user had previously called esp.osdebug(None), because
the IDF is setting the "NimBLE" tag back to the default (INFO), the
messages will continue to be shown.

The one quirk is that if the user does want to see the additional logging,
then they must call esp.osdebug(0, 3) after ble.active(True) to undo the
IDF setting the level back to the default (now ERROR).  This means that
it's impossible (via Python/esp.osdebug) to see stack-startup logging,
you'd have to recompile with the default level changed back to INFO.
2020-09-18 15:53:56 +10:00
Jim Mussared
50efce8174 esp32/mpconfigport.h: Remove duplicate uhashlib registration. 2020-09-11 11:03:29 +10:00
Jim Mussared
311b8519af esp32: Pin MicroPython and NimBLE tasks to core 0.
MicroPython and NimBLE must be on the same core, for synchronisation of the
BLE ringbuf and the MicroPython scheduler.  However, in the current IDF
versions (3.3 and 4.0) there are issues (see e.g. #5489) with running
NimBLE on core 1.

This change - pinning both tasks to core 0 - makes it possible to reliably
run the BLE multitests on esp32 boards.
2020-09-08 12:53:24 +10:00
Jim Mussared
ed14435a8e extmod/modbluetooth: Refactor stack/hci/driver/port bindings.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack.  This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
2020-09-08 11:41:31 +10:00
Damien George
40153b800a esp32/mphalport: Fix mp_hal_time_ns offset.
gettimeofday returns seconds since 2000/1/1 so needs to be adjusted to
seconds since 1970/1/1 to give the correct return value of mp_hal_time_ns.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-31 00:49:58 +10:00
Damien George
ee50a6effe py/mphal.h: Introduce mp_hal_time_ns and implement on various ports.
This should return a 64-bit value being the number of nanoseconds since
1970/1/1.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 16:13:44 +10:00
Kenneth Ryerson
76fefad18b esp32/network_lan: Add support for IP101 PHY.
Signed-off-by: Kenneth Ryerson <kenneth.ryerson@gmail.com>
2020-07-21 00:59:47 +10:00
Jonathan Hogg
7dbef5377c esp32/esp32_rmt: Properly fix looping behaviour of RMT.
A previous commit 3a9d948032 can cause
lock-ups of the RMT driver, so this commit reverses that, adds a loop_en
flag, and explicitly controls the TX interrupt in write_pulses().  This
provides correct looping, non-blocking writes and sensible behaviour for
wait_done().

See also #6167.
2020-07-21 00:57:14 +10:00
Thorsten von Eicken
5264478007 extmod/modussl_mbedtls: Integrate shorter error strings.
The stm32 and esp32 ports now use shorter error strings for mbedtls errors.
Also, MBEDTLS_ERROR_C is enabled on stm32 by default to get these strings.
2020-07-21 00:31:05 +10:00
Jonathan Hogg
3a9d948032 esp32/esp32_rmt: Call rmt_driver_install before rmt_config.
Otherwise the RMT will repeat pulses when using loop(True).  This repeating
is due to a bug in the IDF which will be fixed in an upcoming release, but
for now the accepted workaround is to swap these calls, which should still
work in the fixed version of the IDF.

Fixes issue #6167.
2020-06-19 22:11:14 +10:00
Jon Rob
1678f41744 esp32/esp32_rmt: Extend RMT to support carrier feature.
The ESP32 RMT peripheral has hardware support for a carrier frequency, and
this commit exposes it to Python with the keyword arguments carrier_freq
and carrier_duty_percent in the constructor.  Example usage:

    r = esp32.RMT(0, pin=Pin(2), clock_div=80, carrier_freq=38000, carrier_duty_percent=50)
2020-06-17 00:03:33 +10:00
jp-96
3705bc418c extmod/modbluetooth: Register default GATT service and fix esp32 init.
This is for the NimBLE bindings, to make sure the default GATT service
appears and that the esp32 initialises NimBLE correctly (it now matches
stm32).
2020-06-10 22:33:29 +10:00
Jim Mussared
8e8dcdd34b esp32: Update IDF v4.0 supported hash to v4.0.1.
The main fix relevant to MicroPython is https://github.com/espressif/esp-idf/issues/4196

Release notes here
https://github.com/espressif/esp-idf/releases/tag/v4.0.1
2020-06-09 16:15:47 +10:00
Damien George
621f40b12c esp32/mpthreadport: Fix calculation of thread stack size.
With this commit the code should work correctly regardless of the size of
StackType_t (it's actually 1 byte in size for the esp32's custom FreeRTOS).

Fixes issue #6072.
2020-06-05 20:55:37 +10:00
Thorsten von Eicken
50a7ba2348 esp32/modmachine: Fix machine.reset_cause to use IDF's esp_reset_reason.
The code previously called rtc_get_reset_reason which is a "raw" reset
cause.  The ESP-IDF massages that for the proper reset cause available from
esp_reset_reason.

Fixes issue #5134.
2020-05-29 22:27:53 +10:00
cccc
1662a0b06f esp32/machine_sdcard: Add "freq" keyword arg to SDCard constructor.
To allow high speed access.
2020-05-28 12:19:04 +10:00
Damien George
3b6c9119eb extmod/modbluetooth: Add support for changing the GAP device name.
This commit allows the user to set/get the GAP device name used by service
0x1800, characteristic 0x2a00.  The usage is:

    BLE.config(gap_name="myname")
    print(BLE.config("gap_name"))

As part of this change the compile-time setting
MICROPY_PY_BLUETOOTH_DEFAULT_NAME is renamed to
MICROPY_PY_BLUETOOTH_DEFAULT_GAP_NAME to emphasise its link to GAP and this
new "gap_name" config value.  And the default value of this for the NimBLE
bindings is changed from "PYBD" to "MPY NIMBLE" to be more generic.
2020-05-11 21:30:41 +10:00
Thorsten von Eicken
ab4e197707 esp32/modsocket: Fix getaddrinfo to raise on error.
This commit fixes the behaviour of socket.getaddrinfo on the ESP32 so it
raises an OSError when the name resolution fails instead of returning a []
or a resolution for 0.0.0.0.

Tests are added (generic and ESP32-specific) to verify behaviour consistent
with CPython, modulo the different types of exceptions per MicroPython
documentation.
2020-05-09 16:43:48 +10:00
Thorsten von Eicken
40e9227733 esp32/partitions: Update comments in files regarding offset. 2020-05-03 15:01:26 +10:00
Thorsten von Eicken
952ff8a8ea esp32: Improve support for OTA updates.
This commit adds several small items to improve the support for OTA
updates on an esp32:

- a partition table for 4MB flash modules that has two OTA partitions ready
  to go to do updates
- a GENERIC_OTA board that uses that partition table and that enables
  automatic roll-back in the bootloader
- a new esp32.Partition.mark_app_valid_cancel_rollback() class-method to
  signal that the boot is successful and should not be rolled back at the
  next reset
- an automated test for doing an OTA update
- documentation updates
2020-05-03 15:00:45 +10:00
Damien George
e08ca78f40 py/stream: Remove mp_stream_errno and use system errno instead.
This change is made for two reasons:

1. A 3rd-party library (eg berkeley-db-1.xx, axtls) may use the system
   provided errno for certain errors, and yet MicroPython stream objects
   that it calls will be using the internal mp_stream_errno.  So if the
   library returns an error it is not known whether the corresponding errno
   code is stored in the system errno or mp_stream_errno.  Using the system
   errno in all cases (eg in the mp_stream_posix_XXX wrappers) fixes this
   ambiguity.

2. For systems that have threading the system-provided errno should always
   be used because the errno value is thread-local.

For systems that do not have an errno, the new lib/embed/__errno.c file is
provided.
2020-04-27 23:58:46 +10:00
stijn
84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
Thorsten von Eicken
1ae7e0e561 esp32: Consolidate check_esp_err functions and add IDF error string.
This commit consolidates a number of check_esp_err functions that check
whether an ESP-IDF return code is OK and raises an exception if not.  The
exception raised is an OSError with the error code as the first argument
(negative if it's ESP-IDF specific) and the ESP-IDF error string as the
second argument.

This commit also fixes esp32.Partition.set_boot to use check_esp_err, and
uses that function for a unit test.
2020-04-23 10:59:07 +10:00
Thorsten von Eicken
a177831c46 esp32/modesp32: Add idf_heap_info(capabilities) to esp32 module.
This commit adds an idf_heap_info(capabilities) method to the esp32 module
which returns info about the ESP-IDF heaps.  It's useful to get a bit of a
picture of what's going on when code fails because ESP-IDF can't allocate
memory anymore.  Includes documentation and a test.
2020-04-23 00:02:11 +10:00
stijn
30840ebc99 all: Enable extra conversion warnings where applicable.
Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out
implicit floating point conversions, and add extra Travis builds using
MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found
previously.  For the unix port -Wsign-comparison is added as well but only
there since only clang supports this but gcc doesn't.
2020-04-18 22:42:28 +10:00
stijn
70affd9ba2 all: Fix implicit floating point to integer conversions.
These are found when building with -Wfloat-conversion.
2020-04-18 22:42:24 +10:00
Damien George
f534b99765 esp32: Update to ESP IDF v3.3.2. 2020-04-14 23:30:03 +10:00
Damien George
8e048d2548 all: Clean up error strings to use lowercase and change cannot to can't.
Now that error string compression is supported it's more important to have
consistent error string formatting (eg all lowercase English words,
consistent contractions).  This commit cleans up some of the strings to
make them more consistent.
2020-04-13 22:19:37 +10:00
Damien George
d6f80963df esp32/espneopixel: Use integer arithmetic to compute timing values. 2020-04-09 16:23:34 +10:00
Damien George
e292296d52 py/objexcept: Remove optional TimeoutError exception.
TimeoutError was added back in 077812b2ab for
the cc3200 port. In f522849a4d the cc3200
port enabled use of it in the socket module aliased to socket.timeout.  So
it was never added to the builtins.  Then it was replaced by
OSError(ETIMEDOUT) in 047af9b10b.

The esp32 port enables this exception, since the very beginning of that
port, but it could never be accessed because it's not in builtins.

It's being removed: 1) to not encourage its use; 2) because there are a lot
of other OSError subclasses which are not defined at all, and having
TimeoutError is a bit inconsistent.

Note that ports can add anything to the builtins via MICROPY_PORT_BUILTINS.
And they can also define their own exceptions using the
MP_DEFINE_EXCEPTION() macro.
2020-04-09 16:09:38 +10:00
Jim Mussared
073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
312c699491 esp32: Change from FAT to littlefs v2 as default filesystem.
This commit changes the default filesystem type for esp32 to littlefs v2.
This port already enables both VfsFat and VfsLfs2, so either can be used
for the filesystem, and existing systems that use FAT will still work.
2020-04-04 17:03:30 +11:00
Jim Mussared
e97bb58f0e esp32/README.md: Fix typo in venv instructions. 2020-04-02 22:52:48 +11:00
Damien George
1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George
ad004db662 esp32: Enable and freeze uasyncio. 2020-03-26 01:25:46 +11:00
Damien George
bf4fb16250 esp32/modsocket: Handle poll of a closed socket.
This gets tests/extmod/uselect_poll_basic.py working on the esp32.
2020-03-25 01:17:12 +11:00
Damien George
feb2577585 all: Remove spaces between nested paren and inside function arg paren.
Using new options enabled in the uncrustify configuration.
2020-03-25 00:39:46 +11:00
Jim Mussared
9715905b18 esp32/README.md: Update build instructions for newer toolchain.
Also fix Espressif links to the specific version they apply to.
2020-03-22 13:26:03 +11:00
Damien George
ad9a0ec8ab all: Convert exceptions to use mp_raise_XXX helpers in remaining places. 2020-03-18 17:26:19 +11:00
Thomas Friebel
bd746a4630 esp32: Deinitialize Bluetooth on soft reset.
This fixes a crash, caused by NimBLE continuing to call the Python BLE
interrupt handler after soft reboot.
2020-03-11 13:02:00 +11:00
Damien George
c44d52f33e extmod/modbluetooth_nimble: Move nimble specific code, factor nimble.mk.
Move extmod/modbluetooth_nimble.* to extmod/nimble.  And move common
Makefile lines to extmod/nimble/nimble.mk (which was previously only used
by stm32).  This allows (upcoming) btstack to follow a similar structure.

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-06 12:35:20 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
3f39d18c2b all: Add *FORMAT-OFF* in various places.
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments.  This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...).  In other places
it is used to prevent excessive reformatting that would make the code less
readable.
2020-02-28 10:31:07 +11:00
Jim Mussared
a9ce8dfdaa esp32: Move to IDF 4.0 release version. 2020-02-20 00:34:31 +11:00
Damien George
ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Damien George
97eca38c4f py: Add mp_raise_type helper macro and use it where appropriate.
This provides a more consistent C-level API to raise exceptions, ie moving
away from nlr_raise towards mp_raise_XXX.  It also reduces code size by a
small amount on some ports.
2020-02-13 11:03:37 +11:00
Damien George
5a755ac30a esp32/modsocket: Convert EADDRINUSE error code from lwip return value. 2020-02-11 13:59:09 +11:00
Damien George
f4641b2378 esp32/uart: Use core-provided mp_keyboard_interrupt, placed in IRAM. 2020-02-07 16:08:31 +11:00
Damien George
98a3911c43 py/scheduler: Add "raise_exc" argument to mp_handle_pending.
Previous behaviour is when this argument is set to "true", in which case
the function will raise any pending exception.  Setting it to "false" will
cancel any pending exception.
2020-02-07 16:08:20 +11:00
Jim Mussared
0645478475 esp32/Makefile: Reorder includes to build with latest toolchain.
Tested on:
- IDF3.3.1 (old toolchain)
- IDF4.0-beta1 (old toolchain)
- IDF4.0-beta1 (new toolchain from install.sh / export.sh)
2020-02-04 18:06:14 +11:00
David Lechner
b72cb0ca1b py/mpthread.h: Use strong type for mp_thread_set_state() argument.
This modifies the signature of mp_thread_set_state() to use
mp_state_thread_t* instead of void*.  This matches the return type of
mp_thread_get_state(), which returns the same value.

`struct _mp_state_thread_t;` had to be moved before
`#include <mpthreadport.h>` since the stm32 port uses it in its
mpthreadport.h file.
2020-01-29 17:10:32 +11:00
adzierzanowski
a55c17dc69 esp32/modnetwork: Add max_clients kw-arg to WLAN.config for AP setting.
This allows the user to configure the maximum number of clients that are
connected to the access point.  Resolves #5125.
2020-01-22 16:43:25 +11:00
Jim Mussared
3032ae1155 esp32: Enable NimBLE support on all builds (IDF 3.3 and 4.0).
This commit updates the IDFv3 version to v3.3.1, and enables the
"ubluetooth" module by default on IDFv3 builds.
2020-01-15 00:24:43 +11:00
Thorsten von Eicken
6632dd3981 esp32/modmachine: Add implementation of machine.soft_reset(). 2020-01-12 13:38:45 +11:00
Damien George
99b8c1a937 esp32/Makefile: Assign result of $call to dummy var for older make.
Make version 4.1 and lower does not allow $call as the main expression on a
line, so assign the result of the $call to a dummy variable.

Fixes issue #5426.
2020-01-06 23:03:22 +11:00
Nicko van Someren
4c93955b7b py/objslice: Add support for indices() method on slice objects.
Instances of the slice class are passed to __getitem__() on objects when
the user indexes them with a slice.  In practice the majority of the time
(other than passing it on untouched) is to work out what the slice means in
the context of an array dimension of a particular length.  Since Python 2.3
there has been a method on the slice class, indices(), that takes a
dimension length and returns the real start, stop and step, accounting for
missing or negative values in the slice spec.  This commit implements such
a indices() method on the slice class.

It is configurable at compile-time via MICROPY_PY_BUILTINS_SLICE_INDICES,
disabled by default, enabled on unix, stm32 and esp32 ports.

This commit also adds new tests for slice indices and for slicing unicode
strings.
2019-12-28 23:55:15 +11:00
Damien George
d97b40bdaa py: Introduce MP_ROM_FALSE/MP_ROM_TRUE for ROM to refer to bool objects.
This helps to prevent mistakes, and allows easily changing the ROM value of
False/True if needed.
2019-12-27 22:54:20 +11:00
Damien George
09376f0e47 py: Introduce MP_ROM_NONE macro for ROM to refer to None object.
This helps to prevent mistakes, and allows easily changing the ROM value of
None if needed.
2019-12-27 22:51:17 +11:00
Jim Mussared
7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Matt Trentini
0e0e6132fd esp32/esp32_rmt: Add initial support for RMT peripheral.
This is an ESP32-specific peripheral so lives in the esp32 module.
2019-12-20 12:24:51 +11:00
Seon Rozenblum
0d82f5d8c8 esp32/boards/TINYPICO: Add tinypico.py, dotstar.py with custom manifest. 2019-12-19 10:05:01 +11:00
Damien George
b47e155bd0 py/persistentcode: Add ability to relocate loaded native code.
Implements text, rodata and bss generalised relocations, as well as generic
qstr-object linking.  This allows importing dynamic native modules on all
supported architectures in a unified way.
2019-12-12 20:15:28 +11:00
Andrew Leech
9ca8a503ed esp32/boards: Enable ULP in base sdk configuration.
Fixes issue #5159.
2019-12-05 15:28:56 +11:00
Josh Lloyd
1530fda9cf esp32/machine_rtc: Reduce memory footprint of user mem functionality. 2019-11-21 16:55:12 +11:00
Josh Lloyd
ed2314f35a esp32/machine_rtc: Make RTC.memory size and availability configurable.
The compile-time configuration value MICROPY_HW_RTC_USER_MEM_MAX can now be
used to define the amount of memory set aside for RTC.memory().  If this
value is configured to zero then the RTC.memory functionality is not
included in the build.
2019-11-21 16:55:12 +11:00
Josh Lloyd
82d358510b esp32/rtc: Set system microseconds when setting time via RTC.datetime(). 2019-11-13 13:46:33 +11:00
Jim Mussared
71299d3224 esp32/boards/sdkconfig.base: Resize SSL output buffer from 16 to 4kiB.
The IDF heap is more fragmented with IDF 4 and mbedtls cannot allocate
enough RAM with 16+16kiB for both in and out buffers, so reduce output
buffer size.

Fixes issue #5303.
2019-11-11 11:55:58 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
4be316fb07 esp32/moduos: Enable uos.VfsLfs2 for littlefs filesystems.
This commit adds support for littlefs (v2) on all esp32 boards.

The original FAT filesystem still works and any board with a preexisting
FAT filesystem will still work as normal.  It's possible to switch to
littlefs by reformatting the block device using:

    import uos, flashbdev
    uos.VfsLfs2.mkfs(flashbdev.bdev)

Then when the board reboots (soft or hard) the new littlefs filesystem will
be mounted.  It's possible to switch back to a FAT filesystem by formatting
with uos.VfsFat.mkfs(flashbdev.bdev).
2019-11-06 12:16:00 +11:00
Damien George
d01ca7888b esp32/esp32_partition: Support extended block protocol. 2019-11-06 12:15:34 +11:00
Andreas Motl
d209f9ebe7 esp32: Remove unused "esponewire.c" in favour of extmod/modonewire. 2019-11-05 14:57:05 +11:00
Damien George
c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Damien George
742030945c esp32/Makefile: Add correct arch to MPY_CROSS_FLAGS for native code. 2019-11-04 15:32:20 +11:00
Damien George
cfe1c5abf8 extmod/vfs: Rename BP_IOCTL_xxx constants to MP_BLOCKDEV_IOCTL_xxx.
Also rename SEC_COUNT to BLOCK_COUNT and SEC_SIZE to BLOCK_SIZE.
2019-10-29 14:17:29 +11:00
Mike Teachman
f301170c7c esp32/machine_hw_spi: Fix exception msg when host is already in use.
When a SPI bus is initialized with a SPI host that is currently in use the
exception msg incorrectly indicates "SPI device already in use".  The
mention of "device" in the exception msg is confusing because the error is
about trying to use a SPI host that is already claimed.  A better exception
msg is "SPI host already in use".
2019-10-23 13:31:13 +11:00
Jim Mussared
b02d7e612d extmod/modbluetooth: Rename module to "ubluetooth".
For consistency with "umachine". Now that weak links are enabled
by default for built-in modules, this should be a no-op, but allows
extension of the bluetooth module by user code.

Also move registration of ubluetooth to objmodule rather than
port-specific.
2019-10-22 21:58:05 +11:00
Damien George
d2384efa80 py: Automatically provide weak links from "foo" to "ufoo" module name.
This commit implements automatic module weak links for all built-in
modules, by searching for "ufoo" in the built-in module list if "foo"
cannot be found.  This means that all modules named "ufoo" are always
available as "foo".  Also, a port can no longer add any other weak links,
which makes strict the definition of a weak link.

It saves some code size (about 100-200 bytes) on ports that previously had
lots of weak links.

Some changes from the previous behaviour:
- It doesn't intern the non-u module names (eg "foo" is not interned),
  which saves code size, but will mean that "import foo" creates a new qstr
  (namely "foo") in RAM (unless the importing module is frozen).
- help('modules') no longer lists non-u module names, only the u-variants;
  this reduces duplication in the help listing.

Weak links are effectively the same as having a set of symbolic links on
the filesystem that is searched last.  So an "import foo" will search
built-in modules first, then all paths in sys.path, then weak links last,
importing "ufoo" if it exists.  Thus a file called "foo.py" somewhere in
sys.path will still have precedence over the weak link of "foo" to "ufoo".

See issues: #1740, #4449, #5229, #5241.
2019-10-22 15:30:52 +11:00
Jim Mussared
912892b209 esp32: Add missing and necessary newline at EOF for sdkconfig.240mhz.
When these files get concatenated the newline-at-EOF is necessary so that
the start of the next file doesn't join with the end of the previous.
2019-10-21 23:54:59 +11:00
Jim Mussared
8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Josh Lloyd
59c1b7d4b8 esp32/boards: Split out CPU frequency config, make 160MHz the default.
Remove the 240MHz CPU config option from sdkconfig.base and create a new
sdkconfig.240mhz file for those boards that want to use 240MHz on boot.

The default CPU frequency is now 160MHz (was 240MHz), to align with the ESP
IDF and support more boards (eg those with D2WD chips).

Fixes issue #5169.
2019-10-18 13:42:24 +11:00
Jeremy Herbert
7a7ee16ccf esp32/machine_uart: Add ability to invert UART pins. 2019-10-18 12:05:16 +11:00
Damien George
ce1de1faf0 esp32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed.  boards/manifest.py is used as a default, and can
optionally use boards/manifest_release.py for more scripts.
2019-10-15 21:37:02 +11:00
Jim Mussared
4b2b05718a esp32: Run NimBLE on the app core.
This prevents issues with concurrent access to the ringbuf.
MICROPY_BEGIN_ATOMIC_SECTION is only atomic to the same core.  We could
address this with a mutex, but it's also not safe to call mp_sched_schedule
across cores.
2019-10-15 17:22:15 +11:00
Jim Mussared
418f12c5f5 extmod/modbluetooth: Increase maximum connections from 1 to 4.
This avoids a confusing ENOMEM raised from gap_advertise if there is
currently an active connection.  This refers to the static connection
buffer pre-allocated by Nimble (nothing to do with MicroPython heap
memory).
2019-10-15 17:20:25 +11:00
Damien George
d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Jim Mussared
d5cbee3cfb esp32: Add 4.x version of IDLE WDT config. 2019-10-11 14:30:47 +11:00
Jim Mussared
cd8bbf4cfc esp32/boards: Enable BLE by default when building with IDF 4.x. 2019-10-08 14:50:01 +11:00
Jim Mussared
6a9bd1c1ab esp32: Implement BLE using Nimble from IDF 4.x. 2019-10-08 14:50:01 +11:00
Damien George
917f027c0b esp32: Enable native emitter. 2019-10-05 13:45:25 +10:00
Jim Mussared
c33a4cc213 esp32/Makefile: Fix printing of supported git hash. 2019-09-20 14:37:53 +10:00
Jim Mussared
62d78e231c esp32/main: Use both 3.3 and 4.0 config vars to enable SPIRAM. 2019-09-18 15:49:45 +10:00
Jim Mussared
f469634c0c esp32: Add check to Makefile that the toolchain is in PATH. 2019-09-17 12:26:47 +10:00
Jim Mussared
970f798ea9 esp32: Add check to Makefile for pyparsing version. 2019-09-17 12:26:42 +10:00
Jim Mussared
96008ff59a esp32: Support building with ESP IDF 4.0-beta1.
This commit adds support for a second supported hash (currently set to the
4.0-beta1 tag).  When this hash is detected, the relevant changes are
applied.

This allows to start using v4 features (e.g. BLE with Nimble), and also
start doing testing, while still supporting the original, stable, v3.3 IDF.

Note: this feature is experimental, not well tested, and network.LAN and
network.PPP are currently unsupported.
2019-09-17 12:25:36 +10:00
Damien George
356a728bd0 esp32/Makefile: Add SDKCONFIG_H to QSTR_GLOBAL_REQUIREMENTS.
Fixes issue #5091.
2019-09-12 18:16:16 +10:00
Damien George
bd1d27f00f esp32/modules/inisetup.py: Use bdev.ioctl instead of bdev.SEC_SIZE.
Since the bdev is now a Partition it doesn't have SEC_SIZE.
2019-09-10 22:41:50 +10:00
Alex Albino
80d37d936c esp32: Add support for ESP32-D2WD with 2MiB internal flash.
This patch adds a partitions file for the D2WD and a new board GENERIC_D2WD
which runs on these chip variants.

Resolves issue #4986.
2019-09-10 15:22:16 +10:00
Damien George
31de44775c esp32: Add VFS FAT partition to partitions.csv and mount it as the FS.
This patch uses the newly-added esp32.Partition class to replace the
existing FlashBdev class.  Partition objects implement the block protocol
so can be directly mounted via uos.mount().  This has the following
benefits:

- allows the filesystem partition location and size to be specified in
  partitions.csv, and overridden by a particular board
- very easily allows to have multiple filesystems by simply adding extra
  entries to partitions.csv
- improves efficiency/speed of filesystem operations because the block
  device is implemented fully in C
- opens the possibility to have encrypted flash storage (since Partitions
  can be encrypted)

Note that this patch is fully backwards compatible: existing filesystems
remain untouched and work with this new code.
2019-09-10 15:14:13 +10:00
Damien George
e9af6f5f88 esp32/boards/TINYPICO: Switch to use QIO and 80MHz for SPI interface. 2019-09-10 11:10:19 +10:00
Braden Mars
5641aa55dd esp32: Update to use ESP IDF v3.3
Includes patches for CVE-2019-12586 & CVE-2019-12587
2019-09-07 01:28:11 -05:00
Damien George
983283a8cd esp32/machine_adc: Add ADC.read_u16() method. 2019-09-05 22:13:04 +10:00
Jim Mussared
50482cdc0c esp32/Makefile: Fix subst->patsubst in ESPIDF_BOOTLOADER_SUPPORT_O. 2019-09-03 23:21:50 +10:00
Eric Poulsen
5635b96461 esp32: Add 'config' function to network.LAN, reusing network.WLAN. 2019-08-28 13:11:48 +10:00
Damien George
05eb897d06 esp32: Add esp32.Partition class to expose partition and OTA funcs.
Partitions are exposed as a standard MicroPython block device.
2019-08-20 16:49:18 +10:00
stijn
af5c998f37 py/modmath: Implement math.isclose() for non-complex numbers.
As per PEP 485, this function appeared in for Python 3.5.  Configured via
MICROPY_PY_MATH_ISCLOSE which is disabled by default, but enabled for the
ports which already have MICROPY_PY_MATH_SPECIAL_FUNCTIONS enabled.
2019-08-17 23:23:17 +10:00
Jim Mussared
8db517f26d esp32: Add per-board configs, following other ports.
Replaces the `SDKCONFIG` makefile variable with `BOARD`.  Defaults to
BOARD=GENERIC.  spiram can be enabled with `BOARD=GENERIC_SPIRAM`

Add example definition for TINYPICO, currently identical to GENERIC_SPIRAM
but with custom board/SoC names for the uPy banner.
2019-08-16 00:22:29 +10:00
Damien George
baeebc557c esp32/modules: On initial setup mount internal flash at root.
Like it's done on normal boot up.  Fixes issue #5004.
2019-08-15 22:03:09 +10:00
Damien George
2ccf030fd1 esp32: Add support for mDNS queries and responder.
They are both enabled by default, but can be disabled by defining
MICROPY_HW_ENABLE_MDNS_QUERIES and/or MICROPY_HW_ENABLE_MDNS_RESPONDER to
0.  The hostname for the responder is currently taken from
tcpip_adapter_get_hostname() but should eventually be configurable.
2019-08-15 16:36:47 +10:00
Kenta IDA
b6906fa573 esp32/network_ppp: Add authentication support to the PPP interface.
This commit adds the connect() method to the PPP interface and requires
that connect() be called after active(1).  This is a breaking change for
the PPP API.

With the connect() method it's now possible to pass in authentication
information for PAP/CHAP, eg:

    ppp.active(1)
    ppp.connect(authmode=ppp.AUTH_PAP, username="user", "password="password")

If no authentication is needed simply call connect() without any
parameters.  This will get the original behaviour of calling active(1).
2019-08-14 17:20:58 +10:00
Damien George
7c15e50eb8 esp32/Makefile: Include CFLAGS_EXTRA in CFLAGS definition.
Following other ports, so builds can be customised more easily, eg on the
command line building with a user C-module.
2019-07-30 17:31:23 +10:00
Amir Gonnen
995f9cfdfc esp32: Pin MicroPython tasks to a specific core.
On this port the GIL is enabled and everything works under the assumption
of the GIL, ie that a given task has exclusive access to the uPy state, and
any ISRs interrupt the current task and therefore the ISR inherits
exclusive access to the uPy state for the duration of its execution.

If the MicroPython tasks are not pinned to a specific core then an ISR may
be executed on a different core to the task, making it possible for the
main task and an ISR to execute in parallel, breaking the assumption of the
GIL.

The easiest and safest fix for this is to pin all MicroPython related code
to the same CPU core, as done by this patch.  Then any ISR that accesses
MicroPython state must be registered from a MicroPython task, to ensure it
is invoked on the same core.

See issue #4895.
2019-07-25 15:33:47 +10:00
Damien George
e3e7e3a781 esp32/Makefile: Simplify include of IDF source by using wildcards. 2019-07-20 14:07:18 +10:00
Damien George
b88e51d718 esp32/Makefile: Put OBJ and LIB rule additions in gen_espidf_lib_rule. 2019-07-20 13:04:55 +10:00
Jim Mussared
331c224e07 esp32/Makefile: Fix path expansion for ESPIDF_DRIVER_O.
It was using subst to s/.c/.o/ which changed .c anywhere in the path.
2019-07-20 12:32:43 +10:00
Damien George
a29334761d esp32: Add support for hardware I2C. 2019-07-19 16:31:25 +10:00
Eric Poulsen
fa5c0b819c esp32/network_ppp: Add ppp_set_usepeerdns(pcb, 1) when init'ing iface.
Without this you often don't get any DNS server from your network provider.
Additionally, setting your own DNS _does not work_ without this option set
(which could be a bug in the PPP stack).
2019-07-04 11:17:41 +10:00
Damien George
c80614dfc8 ports: Provide mp_hal_stdio_poll for sys.stdio polling where needed. 2019-07-01 17:10:12 +10:00
Josh Lloyd
2f262d5f9a esp32/Makefile: Include all driver/*.c source files in the build.
Fixes #4869.
2019-06-25 15:12:34 +10:00
Damien George
b80bccccff esp32/modnetwork: Still try to reconnect to WLAN even with AUTH_FAIL.
WIFI_REASON_AUTH_FAIL does not necessarily mean the password is wrong, and
a wrong password may not lead to a WIFI_REASON_AUTH_FAIL error code.  So to
improve reliability connecting to a WLAN always reconnect regardless of the
error.
2019-06-22 21:50:49 +10:00
Damien George
3ee3995be1 esp32: Update to use ESP IDF v3.3-beta3.
This updates ESP IDF to use v3.3-beta3.  And also adjusts README.md to
point to stable docs which provide a link to download the correct toolchain
for this IDF version, namely 1.22.0-80-g6c4433a-5.2.0
2019-06-19 14:32:15 +10:00
Nicko van Someren
1a51fc9ddf esp32/machine_sdcard: Fix bug in SPI slot number selection.
And fix minor typo in docs when referring to SDCard class.
2019-06-17 12:36:22 +10:00
Nicko van Someren
8e3af7d4c8 esp32: Add machine.SDCard class using built-in HW SD/MMC controller.
This adds support for SD cards using the ESP32's built-in hardware SD/MMC
host controller, over either the SDIO bus or SPI.  The class is available
as machine.SDCard and using it can be as simple as:

    uos.mount(machine.SDCard(), '/sd')
2019-06-03 00:37:41 +10:00
Martin Dybdal
de76f73d34 esp32/machine_timer: Reuse Timer handles, deallocate only on soft-reset.
The patch solves the problem where multiple Timer objects (e.g. multiple
Timer(0) instances) could initialise multiple handles to the same internal
timer.  The list of timers is now maintained not for "active" timers (where
init is called), but for all timers created.  The timers are only removed
from the list of timers on soft-reset (machine_timer_deinit_all).

Fixes #4078.
2019-05-31 14:55:07 +10:00
Damien George
883e987b90 esp32/modsocket: Raise EAGAIN when accept fails in non-blocking mode.
EAGAIN should be for pure non-blocking mode and ETIMEDOUT for when there is
a finite (but non-zero) timeout enabled.
2019-05-28 17:43:00 +10:00
Tom Manning
887a6712c2 esp32/machine_touchpad: Use HW timer for FSM to enable wake-on-touch. 2019-05-28 11:14:34 +10:00
Damien George
0557f0b74b esp32/network_ppp: Add a timeout for closing PPP connection.
This also fixes deleting the PPP task, since eTaskGetState() never returns
eDeleted.

A limitation with this patch: once the PPP is deactivated (ppp.active(0))
it cannot be used again. A new PPP instance must be created instead.
2019-05-17 17:14:45 +10:00
Damien George
2630d3e51f esp32/machine_uart: Implement UART.deinit() method. 2019-05-15 17:01:54 +10:00
Damien George
8586afa6f5 esp32/modnetwork: Change type to size_t for uses of mp_obj_str_get_data. 2019-05-13 12:39:03 +10:00
Krono
fbd4e61e57 esp32/machine_wdt: Add timeout arg to select interval, make WDT panic.
The machine.WDT() now accepts the "timeout" keyword argument to select the
WDT interval.  And the WDT is changed to panic mode which means it will
reset the device if the interval expires (instead of just printing an error
message).
2019-04-30 16:53:05 +10:00
Damien George
0646e607b5 ports: Convert to use pyexec_file_if_exists() to execute boot/main.py.
The stm32 and nrf ports already had the behaviour that they would first
check if the script exists before executing it, and this patch makes all
other ports work the same way.  This helps when developing apps because
it's hard to tell (when unconditionally trying to execute the scripts) if
the resulting OSError at boot up comes from missing boot.py or main.py, or
from some other error.  And it's not really an error if these scripts don't
exist.
2019-04-26 15:22:14 +10:00
Damien George
4ce0091449 esp32/README: Add info about pyparsing and the correct Python version.
See issue #4655.
2019-04-18 14:17:01 +10:00
Damien George
69cb24a21d esp32/boards/sdkconfig: Disable WDT check of idle task on CPU1.
With dual-core enabled it's possible that the uPy task has full utilisation
of CPU1.  Fixes issue #4673.
2019-04-05 12:25:21 +11:00
Damien George
92149c8a79 esp32/boards: Enable dual core support by default.
Single core is still supported, just by adding CONFIG_FREERTOS_UNICORE=y to
a custom sdkconfig file.
2019-03-27 11:20:21 +11:00
Damien George
815b79a8d0 esp32/mpthreadport: Exit vPortCleanUpTCB early if threading not init'd. 2019-03-27 11:11:06 +11:00
Damien George
673db939b5 esp32/machine_pin: Rework pull mode config to fix GPIO hold feature.
For gpio_hold_en() to work properly (not draw additional current) pull
up/down must be disabled when hold is enabled.  This patch makes sure this
is the case by reworking the pull constants to be a bit mask.
2019-03-26 15:21:23 +11:00
Damien George
ddc934631c esp32/machine_pin: Add new PULL_HOLD pin pull mode. 2019-03-14 07:28:57 +11:00
Damien George
349b54525e esp32/machine_pin: Make it so None as pull value disables pull up/down.
Previously specifying None as the pull value would leave the pull up/down
state unchanged.  This change makes it so -1 leaves the state unchanged and
None makes the pin float, as per the docs.
2019-03-14 07:26:59 +11:00
Damien George
297092a76a esp32/mphalport: Use ets_delay_us for mp_hal_delay_us_fast.
The system provided one is in ROM and is more accurate.
2019-03-12 15:46:44 +11:00
Damien George
fcace26d87 esp32/Makefile: Add some missing IDF source files to bootloader and app.
Functions in these files may be needed when certain features are enabled
(eg dual core mode), even if the linker does not give a warning or error
about unresolved symbols.
2019-03-11 23:17:09 +11:00
Petr Kracík
41e7ad647e esp32/modnetwork: Remove redundant esp_log include. 2019-03-08 23:36:07 +11:00
Petr Kracík
73c48b1b45 esp32/modnetwork: Implement RSSI for WiFi STA via WLAN.status('rssi'). 2019-03-08 23:35:28 +11:00
Damien George
b5f33ac2cb ports: Update to work with new oofatfs version. 2019-03-05 15:56:39 +11:00
Petr Kracík
21f9329d5d esp32/modnetwork: Fix wifi.isconnected to return False after disconnect.
esp_wifi_connect will return ESP_OK for the normal path of execution which
just means the reconnect is started, not that it is actually reconnected.
In such a case wifi.isconnected() should return False until the
reconnection is complete.  After reconnect a GOT_IP event is called and it
will change wifi_sta_connected back to True.
2019-02-26 00:49:40 +11:00
Petr Kracík
5801a003f0 esp32/network_lan: Make power arg to constructor optional.
A value of None for this argument is already supported, so the argument can
be made optional.
2019-02-21 23:29:10 +11:00
Petr Kracík
01c1432e32 esp32/modnetwork: Catch and report Ethernet events. 2019-02-21 23:28:51 +11:00
Petr Kracík
7d8c71c222 esp32/network_lan: Add arg to constructor to set clock mode for ETH PHY.
This optional parameter for network.LAN clock_mode can be used for cases
where the clock source is different from the default GPIO0.  Fixes #4502.
2019-02-21 23:28:17 +11:00
Damien George
303f27f656 esp32/modsocket: Change socket.socket to be socket type rather than fun.
To make all ports consistent.  Addresses issue #4514.
2019-02-18 23:20:13 +11:00
Damien George
ed09e13943 esp32/modsocket: Fix usocket.send to accept anything with buffer proto. 2019-02-18 12:38:38 +11:00
Yonatan Goldschmidt
bc4f8b438b extmod/moduwebsocket: Refactor websocket to uwebsocket.
As mentioned in #4450, `websocket` was experimental with a single intended
user, `webrepl`. Therefore, we'll make this change without a weak
link `websocket` -> `uwebsocket`.
2019-02-14 00:35:45 +11:00
Mike Causer
812969d615 all: Change PYB message prefix to MPY.
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc.

Having a consistent prefix across ports reduces the difference between
ports, which is a general goal.  And this change won't break pyboard.py
because that tool only looks for "soft reboot".
2019-02-12 15:18:33 +11:00
Damien George
6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Damien George
c33f538066 esp32/modmachine: Add support for changing the CPU frequency. 2019-02-07 22:51:55 +11:00
Damien George
6a95e74387 esp32: Use SPIRAM in mem-map mode so all of it can be used for uPy heap.
Also enable CONFIG_SPIRAM_IGNORE_NOTFOUND to allow boards with faulty or
missing SPIRAM to still boot.
2019-02-06 00:10:50 +11:00
Damien George
8de17b3d96 esp32/modmachine: Rename machine.sleep to machine.lightsleep.
While keeping machine.sleep as an alias for machine.lightsleep for
backwards compatibility.
2019-01-30 13:00:26 +11:00
Damien George
dadee5fa24 esp32/modsocket: Fix crashes when connect/bind can't resolve given addr.
Fixes issue #4441.
2019-01-30 12:40:50 +11:00
Damien George
f431795caf esp32/boards: Use auto xtal freq config instead of default 40MHz.
Auto-detection of the crystal frequency is convenient and allows for a
single binary for many different boards.  But it can be unreliable in
certain situations so in production, for a given board, it's recommended to
configure the correct fixed frequency.
2019-01-28 20:42:12 +11:00
Damien George
5d88272342 esp32/Makefile: Make sure that directory exists for sdkconfig.h. 2019-01-28 20:41:13 +11:00
Damien George
9ac9aa989c esp32/machine_timer: Deinit all active timers on soft reset.
Otherwise they will keep triggering the callback and access invalid data on
the heap.
2019-01-28 16:16:03 +11:00
Damien George
3d49b157b8 esp32: Update to latest ESP IDF using sdkconfig and new ldgen procedure.
Configuration for the build is now specified using sdkconfig rather than
sdkconfig.h, which allows for much easier configuration with defaults from
the ESP IDF automatically applied.  sdkconfig.h is generated using the new
ESP IDF kconfig_new tool written in Python.  Custom configuration for a
particular ESP32 board can be specified via the make variable SDKCONFIG.

The esp32.common.ld file is also now generated using the standard ESP IDF
ldgen.py tool.
2019-01-28 12:44:03 +11:00
Damien George
f59904f799 esp32/Makefile: Put all IDF compenents in .a libs to use IDF ld script.
When the ESP IDF builds a project it puts all separate components into
separate .a library archives.  And then the esp32.common.ld linker script
references these .a libraries by explicit name to put certain object files
in iRAM.

This patch does a similar thing for the custom build system used here,
putting all IDF .o's into their respective .a.  So a custom linker script
is no longer needed.
2019-01-28 12:41:37 +11:00
Damien George
e7ab475276 esp32: Don't put py/scheduler.o in iRAM, it's no longer needed.
ISR's no longer need to be in iRAM, and the ESP IDF provides an option to
specify that they are in iRAM if an application needs lower latency when
handling them.  But we don't use this feature for user interrupts: both
timer and gpio ISR routines are registered without the ESP_INTR_FLAG_IRAM
option, and so the scheduling code no longer needs to be in iRAM.
2019-01-27 16:15:47 +11:00
Damien George
da72bb6833 esp32/machine_hw_spi: Make HW SPI objects statically allocated.
This aligns more closely with the hardware, that there are two, fixed HW
SPI peripherals.  And it allows to recreate the HW SPI objects without
error, as well as create them again after a soft reset.

Fixes issue #4103.
2019-01-23 23:47:36 +11:00
Damien George
d82f344f61 esp32/machine_hw_spi: Use separate DMA channels for HSPI and VSPI.
Otherwise only one of HSPI or VSPI can be used at a time.  Fixes
issue #4068.
2019-01-23 23:40:06 +11:00
Matt Trentini
cd52d2c691 esp32/modules/neopixel.py: Change NeoPixel to different default timings.
In order to suit the more common 800KHz by default (instead of 400KHz), and
also have the same behaviour as the esp8266 port.

Resolves #4396.

Note! This is a breaking change. Anyone that has previously used the
NeoPixel class on an ESP32 board may be affected.
2019-01-23 14:22:38 +11:00
Damien George
eb446ec227 esp32/Makefile: Use system provided math library rather than uPy one.
The ESP IDF system already provides a math library, and that one is likely
to be better tuned to the Xtensa architecture.  The IDF components are also
tested against its own math library, so best not to override it.  Using the
system provided library also allows to easily switch to double-precision
floating point by changing MICROPY_FLOAT_IMPL to MICROPY_FLOAT_IMPL_DOUBLE.
2019-01-17 16:43:20 +11:00
Damien George
90f86a0197 esp32/machine_pin: Add Pin.off() and Pin.on() methods. 2019-01-16 17:33:56 +11:00
Damien George
f350b640a0 esp32/modsocket: For socket read only release GIL if socket would block.
If there are many short reads to a socket in a row (eg by readline) then
releasing and acquiring the GIL each time will give very poor throughput.
So first poll the socket to see if it has data, and if it does then don't
release the GIL.
2019-01-10 15:46:44 +11:00
Damien George
efe0569c26 esp32/mphalport: When tx'ing to REPL only release GIL if many chars sent
Otherwise, if multiple threads are active, printing data to the REPL may be
very slow because in some cases only one character is output per call to
mp_hal_stdout_tx_strn.
2019-01-10 15:43:47 +11:00
Damien George
da7355e213 esp32/modmachine: Enable machine.sleep() now that the IDF supports it. 2018-12-06 17:23:27 +11:00
Damien George
9c6c32cc51 esp32/machine_pwm: On deinit stop routing PWM signal to the pin.
Fixes issue #4273.
2018-12-06 17:05:16 +11:00
Damien George
287b02d98a esp32/machine_pwm: Support higher PWM freq by auto-scaling timer res. 2018-12-06 16:43:39 +11:00
Damien George
87623082e3 esp32/machine_uart: Implement UART.sendbreak() method.
The uart_write_bytes_with_break() function requires non-zero data to be
sent before the break, so a standalone break must be synthesised.
2018-12-06 15:40:22 +11:00
Damien George
9ddc182ec7 esp32/machine_uart: Add txbuf/rxbuf keyword args to UART construct/init.
As per the machine.UART documentation, these are used to set the length of
the TX and RX buffers.
2018-12-05 16:48:34 +11:00
Damien George
485514f57a esp32: Allocate task TCB and stack from system heap not uPy heap.
This is necessary for two reasons: 1) FreeRTOS still needs the TCB data
structure even after vPortCleanUpTCB has been called, so this latter hook
function cannot free the TCB, and there is no where else to safely delete
it (this behaviour has changed recently in the ESP IDF); 2) when using
external SPI RAM the uPy heap is in this external memory but the task stack
must be allocated from internal SRAM.

Fixes issue #3904.
2018-11-28 15:00:45 +11:00
Damien George
0233049b79 esp32/mpthreadport: Prevent deadlocks when deleting all threads.
vTaskDelete now immediately calls vPortCleanUpTCB, which requires the
thread_mutex mutex, so vTaskDelete must be called after this mutex is
released.
2018-11-28 14:30:11 +11:00
Eric Poulsen
3c6f639aa5 esp32/network_ppp: Add PPPoS functionality.
This commit adds network.PPP(stream) which allows to create a TCP/IP
network interface over a stream object (eg a UART).
2018-10-19 23:32:02 +11:00
Eric Poulsen
5e5aef53fb esp32/modesp32: Add hall_sensor() function. 2018-10-19 17:28:02 +11:00
Damien George
185716514f esp32/machine_rtc: Fix locals dict entry, init qstr points to init meth. 2018-09-20 17:52:16 +10:00
Siarhei Farbotka
e62f59217b esp32: Fix int overflow in machine.sleep/deepsleep functions. 2018-09-14 13:25:45 +10:00
Damien George
48d736f491 esp32: Update to latest ESP IDF.
Among other things, this requires putting bootloader object files in to
their relevant .a archive, so that they can be correctly referenced by the
ESP IDF's linker script.
2018-08-14 16:45:37 +10:00
Eric Poulsen
419eb86074 esp32/modnetwork: Add network.(W)LAN.ifconfig('dhcp') support. 2018-07-18 11:02:11 +10:00
Nicko van Someren
c3c914f4dd esp8266,esp32: Implement high-res timers using new tick_hz argument.
machine.Timer now takes a new argument in its constructor (or init method):
tick_hz which specified the units for the period argument.  The period of
the timer in seconds is: period/tick_hz.

For backwards compatibility tick_hz defaults to 1000.  If the user wants to
specify the period (numerator) in microseconds then tick_hz can be set to
1000000.  The user can also specify a period of an arbitrary number of
cycles of an arbitrary frequency using these two arguments.

An additional freq argument has been added to allow frequencies to be
specified directly in Hertz.  This supports floating point values when
available.
2018-07-17 13:17:23 +10:00
Damien George
a3ba5f127e esp32/modesp32: Use MP_ROM_QSTR and MP_ROM_PTR in const locals dict. 2018-07-16 00:02:35 +10:00
Jérôme Poulin
4f5b435d9b esp32/modesp32: Add raw temperature reading to esp32 module.
Using direct register control as specified by ESP-IDF in
components/esp32/test/test_tsens.c.  Temperature doesn't represent any
particular unit, isn't calibrated and will vary from device to device.
2018-07-16 00:02:26 +10:00
Mitchell Currie
385fa51806 esp32: Implement WLAN.status() return codes.
Resolves #3913: missing esp32 status() implementation.
2018-07-14 16:26:43 +10:00
Damien George
9c8141f07e esp32/modnetwork: Add support for bssid parameter in WLAN.connect(). 2018-07-09 14:01:52 +10:00
Nicko van Someren
14ab81e87a esp32: Reduce latency for handling of scheduled Python callbacks.
Prior to this patch there was a large latency for executing scheduled
callbacks when when Python code is sleeping: at the heart of the
implementation of sleep_ms() is a call to vTaskDelay(1), which always
sleeps for one 100Hz tick, before performing another call to
MICROPY_EVENT_POLL_HOOK.

This patch fixes this issue by using FreeRTOS Task Notifications to signal
the main thread that a new callback is pending.
2018-07-04 10:49:37 +10:00
Damien George
349d8e1324 esp32: Allow to build with uPy floats disabled. 2018-07-03 12:10:03 +10:00
Damien George
8f86fbfd6c ports: Enable ure.sub() on stm32, esp8266 (not 512k) and esp32. 2018-07-02 15:13:18 +10:00
Damien George
82bc4838d2 esp32/mpconfigport.h: Enable ucryptolib module. 2018-06-27 16:44:59 +10:00
Damien George
34b2f6b6fc esp32/modules: Include umqtt library in frozen modules. 2018-06-15 16:39:49 +10:00
Damien George
d61d119c94 esp32: Update to latest ESP IDF. 2018-06-15 16:23:53 +10:00
Damien George
cf1509c911 esp32/fatfs_port: Implement get_fattime so FAT files have a timestamp.
Fixes issue #3859.
2018-06-13 14:13:34 +10:00
Damien George
0501427907 esp32: Remove port-specific uhashlib implementation and use common one.
Now that the common module has mbedtls support for both SHA1 and SHA256 it
can now be used on this port.
2018-06-12 13:50:11 +10:00
Damien George
565f590586 ports: Enable IOBase on unix, stm32, esp8266 and esp32.
It's a core feature, in particular required for user-streams with uasyncio.
2018-06-12 12:29:26 +10:00
Damien George
b2fa1b50ed ports: Call gc_sweep_all() when doing a soft reset.
This calls finalisers of things like files and sockets to cleanly close
them.
2018-06-12 11:56:25 +10:00
Glenn Moloney
039f196c56 esp32/modnetwork: Fix isconnected() when using static IP config.
Currently <WLAN>.isconnected() always returns True if a static IP is set,
regardless of the state of the connection.

This patch introduces a new flag 'wifi_sta_connected' which is set in
event_handler() when GOT_IP event is received and reset when DISCONNECTED
event is received (unless re-connect is successful).  isconnected() now
simply returns the status of this flag (for STA_IF).

The pre-existing flag misleadingly named 'wifi_sta_connected" is also
renamed to 'wifi_sta_connect_requested'.

Fixes issue #3837
2018-06-08 13:13:21 +10:00
Damien George
93150a0d40 ports: Enable descriptors on stm32, esp8266, esp32 ports.
They are now efficient (in runtime performance) and provide a useful
feature that's hard to obtain without them enabled.

See issue #3644 and PR #3826 for background.
2018-06-08 12:23:08 +10:00
Damien George
f35aae366c extmod/vfs_fat: Rename FileIO/TextIO types to mp_type_vfs_fat_XXX.
So they don't clash with other VFS implementations.
2018-06-06 14:28:23 +10:00
Damien George
a90124a9e2 esp32: Add support for building with external SPI RAM.
This patch adds support for building the firmware with external SPI RAM
enabled.  It is disabled by default because it adds overhead (due to
silicon workarounds) and reduces performance (because it's slower to have
bytecode and objects stored in external RAM).

To enable it, either use "make CONFIG_SPIRAM_SUPPORT=1", or add this line
to you custom makefile/GNUmakefile (before "include Makefile"):

    CONFIG_SPIRAM_SUPPORT = 1

When this option is enabled the MicroPython heap is automatically allocated
in external SPI RAM.

Thanks to Angus Gratton for help with the compiler and linker settings.
2018-06-05 13:57:59 +10:00
Angus Gratton
bc92206f89 esp32/Makefile: Extract common C & C++ flags for consistent compilation. 2018-06-05 13:05:12 +10:00
Nick Moore
ef4c8e6e97 esp32: Silence ESP-IDF log messages when in raw REPL mode.
This prevents clients such as ampy, mpy-utils, etc getting confused by
extraneous data.
2018-05-28 20:15:08 +10:00
Damien George
df9b7e8f24 esp32/esp32.custom_common.ld: Put soc code in iram0.
This is what the IDF does, it must be done.
2018-05-23 12:57:50 +10:00
Damien George
20b4b85f72 ports: Enable MICROPY_PY_BUILTINS_ROUND_INT on selected ports. 2018-05-22 14:18:16 +10:00
Damien George
2923671a0c esp32/Makefile: Update to latest ESP IDF version. 2018-05-21 11:28:36 +10:00
Damien George
cdaace1fdf esp32/modnetwork: Fix STA/AP activate/deactivate for new IDF API.
WIFI_MODE_NULL is no longer supported by the ESP IDF, instead one must use
esp_wifi_start/esp_wifi_stop.
2018-05-15 11:50:37 +10:00
Bas Wijnen
67e1a4f8be esp32: Update to latest ESP IDF version.
- Updated supported git hash to current IDF version.
- Added missing targets and includes to Makefile.
- Updated error codes for networking module.
- Added required constant to sdkconfig configuration.
2018-05-14 11:42:46 +10:00
Damien George
12a3fccc7e esp32/modsocket: Check for pending events during blocking socket calls. 2018-05-03 00:09:25 +10:00
Damien George
4fa7d36cee esp32: Use mp_rom_map_elem_t and MP_ROM_xxx macros for const dicts. 2018-05-02 22:33:41 +10:00
Damien George
6681eb809a esp32/modsocket: Correctly handle reading from a peer-closed socket.
If a socket is cleanly shut down by the peer then reads on this socket
should continue to return zero bytes.  The lwIP socket API does not have
this behaviour (it only returns zero once, then blocks on subsequent calls)
so this patch adds explicit checks and logic for peer closed sockets.
2018-05-02 22:31:00 +10:00
Torwag
fb7dabb971 esp32/README: Add --init to submodule update command.
Add --init to the submodule update example, thus, all submodules get
initialised including the nested (--recursive) ones.  Without it there
might not be a submodule init.
2018-05-02 17:24:17 +10:00
Damien George
777e042ab5 esp32/modnetwork: Allow to get ESSID of AP that STA is connected to.
Following the same addition to esp8266 port.
2018-05-01 16:37:08 +10:00
Andreas Valder
298c072433 esp32: Add support for the esp32's ULP.
The ULP is available as esp32.ULP().  See README.ulp.md for basic usage.
2018-05-01 16:19:37 +10:00
Damien George
23e9c3bca7 esp32/modules: Add support scripts for WebREPL.
WebREPL now works on the esp32 in the same way it does on esp8266.
2018-04-27 23:58:51 +10:00
Damien George
c1d4352e65 esp32/mpconfigport: Enable webrepl module and socket events. 2018-04-27 23:57:57 +10:00