Commit Graph

19 Commits

Author SHA1 Message Date
Damien George
e1ae9939ac stm32: Support compiling with object representation D.
With this and previous patches the stm32 port can now be compiled using
object representation D (nan boxing).  Note that native code and frozen mpy
files with float constants are currently not supported with this object
representation.
2018-07-08 23:25:11 +10:00
Damien George
47ecbbbecb stm32/usb: Add ability to have 2x VCP interfaces on the one USB device.
This patch adds the configuration MICROPY_HW_USB_ENABLE_CDC2 which enables
a new USB device configuration at runtime: VCP+VCP+MSC.  It will give two
independent VCP interfaces available via pyb.USB_VCP(0) and pyb.USB_VCP(1).
The first one is the usual one and has the REPL on it.  The second one is
available for general use.

This configuration is disabled by default because if the mode is not used
then it takes up about 2200 bytes of RAM.  Also, F4 MCUs can't support this
mode on their USB FS peripheral (eg PYBv1.x) because they don't have enough
endpoints.  The USB HS peripheral of an F4 supports it, as well as both the
USB FS and USB HS peripherals of F7 MCUs.
2018-05-14 23:44:45 +10:00
Damien George
2e565cc0d4 stm32/usb: Change HID report funcs to take HID state, not usbdev state. 2018-05-14 17:04:43 +10:00
Damien George
ed92d62326 stm32/usb: Combine HID lower-layer and interface state into one struct. 2018-05-14 16:34:31 +10:00
Damien George
bf08a99ccd stm32/usb: Combine CDC lower-layer and interface state into one struct. 2018-05-14 16:15:58 +10:00
Damien George
ed32284b70 stm32/usb: Use usbd_cdc_itf_t pointer directly in USB_VCP class. 2018-05-14 15:24:44 +10:00
Damien George
c1115d931f stm32/usb: Use correct type for USB HID object. 2018-05-09 16:00:19 +10:00
Damien George
e1bc85416a stm32/usb: Fix broken pyb.have_cdc() so it works again. 2018-05-09 15:59:48 +10:00
Damien George
5c320bd0b0 stm32: Introduce MICROPY_HW_ENABLE_USB and clean up USB config.
This patch allows to completely compile-out support for USB, and no-USB is
now the default.  If a board wants to enable USB it should define:

    #define MICROPY_HW_ENABLE_USB (1)

And then one or more of the following to select the USB PHY:

    #define MICROPY_HW_USB_FS (1)
    #define MICROPY_HW_USB_HS (1)
    #define MICROPY_HW_USB_HS_IN_FS (1)
2018-02-13 18:51:08 +11:00
Damien George
db702ba722 stm32/usbdev: Add support for high-speed USB device mode.
This patch adds support in the USBD configuration and CDC-MSC-HID class for
high-speed USB mode.  To enable it the board configuration must define
USE_USB_HS, and either not define USE_USB_HS_IN_FS, or be an STM32F723 or
STM32F733 MCU which have a built-in HS PHY.  High-speed mode is then
selected dynamically by passing "high_speed=True" to the pyb.usb_mode()
function, otherwise it defaults to full-speed mode.

This patch has been tested on an STM32F733.
2018-02-01 17:57:44 +11:00
Damien George
71312d0bd1 stm32/usb: Allow board to select which USBD is used as the main one.
By defining MICROPY_HW_USB_MAIN_DEV a given board can select to use either
USB_PHY_FS_ID or USB_PHY_HS_ID as the main USBD peripheral, on which the
REPL will appear.  If not defined this will be automatically configured.
2018-02-01 17:47:28 +11:00
Damien George
3130424b54 stm32/usbdev: Add support for MSC-only USB device class.
Select this mode in boot.py via: pyb.usb_mode('MSC')
2018-02-01 15:47:16 +11:00
Damien George
0eb333e3cf stm32/mphalport: Improve efficiency of mp_hal_stdout_tx_strn_cooked.
Also simplifies the code by removing the specialised (and inefficient)
cooked functions from UART and USB_VCP.
2017-10-19 14:15:32 +11:00
Damien George
f7f4bf0321 stm32/usbdev: Move all the USB device descriptor state into its struct. 2017-09-22 10:57:21 +10:00
Damien George
dbff0164b3 stm32/usbdev: Merge all global USB device state into a single struct.
This is the final piece of USB device refactoring to support multiple
USB device instances.
2017-09-21 21:51:15 +10:00
Damien George
f8f17f48c5 stm32/usbdev: Put all state for the USB device driver in a struct. 2017-09-21 21:51:04 +10:00
Damien George
77e1da40e2 stm32/usbdev: Put all HID state in a struct. 2017-09-21 21:50:37 +10:00
Damien George
980b33177b stm32/usbdev: Put all CDC state in a struct. 2017-09-21 21:48:28 +10:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00