Commit Graph

82 Commits

Author SHA1 Message Date
Hemanth kumar
a44892dd0d drivers/sdcard: Update doc for ESP8266 to use correct SPI number.
machine.SPI(0) results in ValueError on ESP8266.  SPI(1) is the user
hardware SPI port (or use SPI(-1) for software SPI).
2018-01-31 21:25:58 +11:00
Damien George
efdda2c62d stm32: Add support for DHT11/DHT22 sensors. 2018-01-31 18:12:53 +11:00
Damien George
a40ce1d829 esp8266/modules: Move dht.py driver to drivers/dht directory. 2018-01-31 18:11:06 +11:00
Ayke van Laethem
a275cb0f48 drivers/sdcard: Avoid allocation on the heap.
This commit fixes two things:
 1. Do not allocate on the heap in readblocks() - unless the block size
    is bigger than 512 bytes.
 2. Raise an error instead of returning 1 to indicate an error: the FAT
    block device layer does not check the return value. And other
    backends (e.g. esp32 blockdev) also raise an error instead of
    returning non-zero.
2018-01-10 19:14:46 +11:00
Jim Mussared
bb3412291a drivers/display/ssd1306: Fix super() call in SSD1306 driver. 2018-01-10 17:56:10 +11:00
Ayke van Laethem
b90f51f86a drivers/sdcard: Support old SD cards (<=2GB). 2017-12-22 16:49:58 +11:00
Peter Hinch
479392a56e drivers/display/ssd1306: Make SSD1306 class inherit from FrameBuffer. 2017-12-13 14:45:04 +11:00
Peter Hinch
ccaa5f5b0b drivers/nrf24l01: Make driver and test run on pyboard, ESP8266, ESP32. 2017-11-20 11:37:47 +11:00
Damien George
c0ea91bc89 drivers/wiznet5k: Get low-level W5500 driver working.
This patch implements the basic SPI read/write functions for the W5500
chip.  It also allows _WIZCHIP_ to be configured externally to select the
specific Wiznet chip.
2017-10-16 15:34:08 +11:00
Li Weiwei
73e387cff6 drivers/wiznet5k: Improve the performance of socket ops with threading.
Use MICROPY_THREAD_YIELD() instead of HAL_Delay in busy waiting to improve
the performance of connect, send, recv, sento and recvfrom.
2017-10-16 13:32:34 +11:00
Damien George
ca2427c313 drivers/display/ssd1306: Make poweron() work the same with SSD1306_SPI.
The poweroff() and poweron() methods are used to do soft power control of
the display, and this patch makes these methods work the same for both I2C
and SPI interfaces.
2017-10-06 12:48:44 +11:00
Tiago Queiroz
7df4083ac6 drivers/display/ssd1306: Implement SSD1306_I2C poweron method.
After a poweroff(), the poweron() method does a soft power-on and any
previous state of the display persists.
2017-10-06 12:47:22 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George
54acd0b0f0 drivers/nrf24l01: Make nRF24L01 test script more portable. 2017-10-03 20:00:31 +11:00
Peter Hinch
8fa03fee77 drivers/display/ssd1306.py: Improve performance of graphics methods.
It removes the need for a wrapper Python function to dispatch to the
framebuf method which makes each function call a bit faster, roughly 2.5x.
This patch also adds the rest of the framebuf methods to the SSD class.
2017-09-25 16:13:32 +10:00
Damien George
613510bce8 drivers/memory/spiflash: Change from hard-coded soft SPI to generic SPI.
The SPI flash driver now supports using an arbitrary SPI object to
communicate with the flash chip, and in particular can use a hardware SPI
peripheral.
2017-08-29 11:37:18 +10:00
Javier Candeira
35a1fea90b all: Raise exceptions via mp_raise_XXX
- Changed: ValueError, TypeError, NotImplementedError
  - OSError invocations unchanged, because the corresponding utility
    function takes ints, not strings like the long form invocation.
  - OverflowError, IndexError and RuntimeError etc. not changed for now
    until we decide whether to add new utility functions.
2017-08-13 22:52:33 +10:00
Alexander Steffen
55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Alexander Steffen
299bc62586 all: Unify header guard usage.
The code conventions suggest using header guards, but do not define how
those should look like and instead point to existing files. However, not
all existing files follow the same scheme, sometimes omitting header guards
altogether, sometimes using non-standard names, making it easy to
accidentally pick a "wrong" example.

This commit ensures that all header files of the MicroPython project (that
were not simply copied from somewhere else) follow the same pattern, that
was already present in the majority of files, especially in the py folder.

The rules are as follows.

Naming convention:
* start with the words MICROPY_INCLUDED
* contain the full path to the file
* replace special characters with _

In addition, there are no empty lines before #ifndef, between #ifndef and
one empty line before #endif. #endif is followed by a comment containing
the name of the guard macro.

py/grammar.h cannot use header guards by design, since it has to be
included multiple times in a single C file. Several other files also do not
need header guards as they are only used internally and guaranteed to be
included only once:
* MICROPY_MPHALPORT_H
* mpconfigboard.h
* mpconfigport.h
* mpthreadport.h
* pin_defs_*.h
* qstrdefs*.h
2017-07-18 11:57:39 +10:00
Damien George
683df1c8d5 drivers/onewire: Enable pull-up when init'ing the 1-wire pin.
A previous version of the 1-wire driver (which was recently replaced by the
current one) had this behaviour and it allows to create a 1-wire bus
without any external pull-up resistors.
2017-06-26 17:48:05 +10:00
Damien George
a065d78675 drivers/onewire: Move onewire.py, ds18x20.py from esp8266 to drivers.
These drivers can now be used by any port (so long as that port has the
_onewire driver from extmod/modonewire.c).

These drivers replace the existing 1-wire and DS18X20 drivers in the
drivers/onewire directory.  The existing ones were pyboard-specific and
not very efficient nor minimal (although the 1-wire driver was written in
pure Python it only worked at large enough CPU frequency).

This commit brings backwards incompatible API changes to the existing
1-wire drivers.  User code should be converted to use the new drivers, or
check out the old version of the code and keep a local copy (it should
continue to work unchanged).
2017-06-22 16:28:07 +10:00
Paul Sokolovsky
1c9ee49756 drivers: Replace deprecated Pin.high()/low() methods with .__call__(1/0). 2017-05-21 17:44:58 +03:00
Damien George
55dd83a7ba drivers/display/lcd160cr_test: Allow test to take orientation parameter. 2017-05-17 19:54:38 +10:00
Damien George
f351c6db5e drivers/display/lcd160cr: Fix get_line method and enhance screen_dump.
The docs are updated and describe the new behaviour of these methods.
2017-05-17 19:53:13 +10:00
Damien George
d7310fabc2 drivers/nrf24l01: Update to work on newer ports, using machine, utime.
Changes made are:
- Use the time module in place of the pyb module for delays.
- Use spi.read/spi.write instead of spi.send/spi.receive.
- Drop some non-portable parameters to spi and pin initialization.

Thanks to @deshipu for the original patch.
2017-04-07 15:54:21 +10:00
Damien George
528aeb3bf3 drivers/display/lcd160cr: Add check that JPEG size is less than 65536. 2017-02-27 18:39:35 +11:00
Damien George
8400d0461d drivers/display/lcd160cr: Fix bug with save_to_flash method. 2017-02-24 17:22:57 +11:00
Damien George
b0a6dda115 drivers/display/lcd160cr: Fix bugs with lcd.get_pixel().
Fixes issues #2880 and #2881.
2017-02-21 17:40:34 +11:00
Stephan Brauer
8f3e07f17d drivers/display/lcd160cr: Use correct variable in set_power(). 2017-02-17 16:54:05 +11:00
Paul Sokolovsky
d5e9ab6e61 extmod/machine_pulse: Make time_pulse_us() not throw exceptions.
machine.time_pulse_us() is intended to provide very fine timing, including
while working with signal bursts, where each transition is tracked in row.
Throwing and handling an exception may take too much time and "signal loss".
So instead, in case of a timeout, just return negative value. Cases of
timeout while waiting for initial signal stabilization, and during actual
timing, are recognized.

The documentation is updated accordingly, and rewritten somewhat to clarify
the function behavior.
2017-02-05 14:20:17 +03:00
Damien George
784e023a26 drivers/memory: Add SPI flash driver, written in C. 2017-01-24 16:56:03 +11:00
Damien George
43d9f9916a drivers/display: Add driver and test for uPy LCD160CR display. 2017-01-23 14:36:19 +11:00
Mike Causer
c5310ee5b5 drivers: Fix some minor spelling mistakes.
respones -> response
succeses -> successes
2017-01-18 15:31:05 +11:00
syndycat
b2611d6be3 drivers/onewire/ds18x20: Fix negative temperature calc for DS18B20. 2017-01-08 19:26:22 +11:00
Dave Hylands
3c84197f17 drivers/onewire: Enable pull up on data pin.
The driver seems to be be enabling the pullup resistor in most places, but
not this one. Making this one little change allows onewire devices to be
used with no external pullup resistor.
2017-01-03 17:19:22 +11:00
Radomir Dopieralski
eb09336e99 drivers/display/ssd1306.py: Update to use FrameBuffer not FrameBuffer1 2016-12-01 16:43:25 +11:00
Damien George
7bb0f7b0f6 drivers: Add "from micropython import const" when const is used.
Following best-practice use of the const feature, to make it compatible
with Python.
2016-11-03 12:41:11 +11:00
Damien George
571e6f26db py: Specialise builtin funcs to use separate type for fixed arg count.
Builtin functions with a fixed number of arguments (0, 1, 2 or 3) are
quite common.  Before this patch the wrapper for such a function cost
3 machine words.  After this patch it only takes 2, which can reduce the
code size by quite a bit (and pays off even more, the more functions are
added).  It also makes function dispatch slightly more efficient in CPU
usage, and furthermore reduces stack usage for these cases.  On x86 and
Thumb archs the dispatch functions are now tail-call optimised by the
compiler.

The bare-arm port has its code size increase by 76 bytes, but stmhal drops
by 904 bytes.  Stack usage by these builtin functions is decreased by 48
bytes on Thumb2 archs.
2016-10-21 16:26:01 +11:00
Damien George
4ebdb1f2b2 py: Be more specific with MP_DECLARE_CONST_FUN_OBJ macros.
In order to have more fine-grained control over how builtin functions are
constructed, the MP_DECLARE_CONST_FUN_OBJ macros are made more specific,
with suffix of _0, _1, _2, _3, _VAR, _VAR_BETEEN or _KW.  These names now
match the MP_DEFINE_CONST_FUN_OBJ macros.
2016-10-21 16:26:01 +11:00
Damien George
e3d29996b3 driver/dht: Use mp_raise_OSError helper function. 2016-10-07 13:53:34 +11:00
Radomir Dopieralski
ce1c786297 drivers/sdcard: Port the SDCard driver to new machine API.
With backwards compatibility for pyboard.
2016-09-01 17:44:07 +10:00
Damien George
dfe056df6f drivers/wiznet5k: Fix indentation so it's not misleading.
Otherwise gcc 6.1.1 raises a misleading-indentation error.
2016-07-11 21:11:25 +01:00
Radomir Dopieralski
ab8a5d5199 drivers/display/ssd1306: Add width arg and support 64px wide displays.
In particular, the WeMOS D1 Mini board comes with a shield that has a
64x48 OLED display. This patch makes it display properly, with the upper
left pixel being at (0, 0) and not (32, 0).

I tried to do this with the configuration commands, but there doesn't
seem to be a command that would set the column offset (there is one for
the line offset, though).
2016-06-26 13:09:31 +01:00
Radomir Dopieralski
43c8f545d2 drivers/display/ssd1306: update SSD1306_SPI to work with new API
Makes it work on the ESP8266.
2016-06-03 11:13:17 +01:00
Damien George
4940bee62a extmod: Add machine time_pulse_us function (at C and Python level).
The C implementation is taken from the DHT driver.
2016-05-31 13:58:48 +01:00
Damien George
48a7ef0576 drivers: Add C-level function to read DHT11 and DHT22 devices.
Uses mp_hal_pin API.
2016-05-26 17:10:06 +01:00
Damien George
ce2d34d74f drivers/cc3000: Rename timeval to cc3000_timeval, to avoid clash.
The timeval struct can be defined by system C headers.
2016-05-10 23:46:00 +01:00
Damien George
73bc0c24ab drivers: Add SSD1306 OLED driver, with I2C and SPI interfaces. 2016-04-12 14:06:54 +01:00
Peter Hinch
2bd758fe96 drivers/sdcard: Add support for multi-block read/write; add SD test. 2016-02-02 11:16:15 +00:00
Damien George
24652228af drivers/sdcard: Allow up to 5 retries to initialise SD card.
Apparently some cards need more than 2 retries.  See issue #1482.
2015-10-10 00:07:40 +01:00